Web lists-archives.com

Re: Re: Leadtek Winfast TV2100




Hi,

thanks!

Here is the TI PLL datasheet we walked 
along.

Let's see, if we missed something.

Cheers,
Hermann


Am Montag, den 23.11.2009, 09:23 +0800 schrieb Terry Wu:
> Hi,
> 
>     The TVF88T5-BDFF data sheet is attached.
> 
> Terry Wu
> 
> 11/17/2003  06:39 PM            72,010 TVF5531-MF.pdf
> 03/12/2008  11:37 AM           555,285 TVF5533-MF-.pdf
> 02/24/2004  02:19 PM           120,727 TVF5533-MF.pdf
> 12/30/2003  06:59 PM            91,577 TVF5831-MFF.pdf
> 09/26/2005  10:20 AM           156,853 TVF78P3-MFF.pdf
> 11/17/2003  06:39 PM            67,947 TVF8531-BDF.pdf
> 11/17/2003  06:39 PM            67,715 TVF8531-DIF.pdf
> 03/12/2008  11:37 AM           509,340 TVF8533-BDF.pdf
> 03/12/2008  11:37 AM           507,295 TVF8533-DIF.pdf
> 12/30/2003  06:59 PM            87,921 TVF8831-BDFF.pdf
> 12/30/2003  06:59 PM            87,624 TVF8831-DIFF.pdf
> 09/26/2005  10:20 AM           176,525 TVF88P3-CFF.pdf
> 03/24/2006  10:48 AM           460,941 TVF88T5-BDFF.pdf
> 02/24/2004  02:19 PM           132,304 TVF9533-BDF.pdf
> 02/24/2004  02:19 PM           120,940 TVF9533-DIF.pdf
> 03/12/2008  11:37 AM           458,967 TVF99T5-BDFF.pdf
> 
> 
> 2009/11/23 hermann pitton <hermann-pitton@xxxxxxxx>:
> > Hi,
> >
> > Am Sonntag, den 22.11.2009, 20:51 +0800 schrieb Terry Wu:
> >> Hi,
> >>
> >>     I will give you the tuner data sheet and schematic of GPIO tomorrow.
> >>     Stay tuned.
> >>
> >> Terry
> >
> > that is of course very welcome.
> >
> > We know that the PLL chip is TI sn761677, datasheet is publicly
> > available, radio switch is 0x11 and inside is a TENA tuner PCB also
> > known from other tuners.
> >
> > For the gpio configuration hopefully my assumptions should not be that
> > wrong.
> >
> > Pavle, are you able to test such yourself or should I provide some
> > patches?
> >
> > Cheers,
> > Hermann
> >
> >> 2009/11/22  <hermann-pitton@xxxxxxxx>:
> >> > Hi,
> >> >
> >> > sorry, posting from a webmail interface.
> >> >
> >> > Might get bounced from the list.
> >> >
> >> > ----- Original Nachricht ----
> >> > Von:     Pavle Predic <pavle.predic@xxxxxxxxxxx>
> >> > An:      Terry Wu <terrywu2009@xxxxxxxxx>, hermann pitton <hermann-pitton@xxxxxxxx>
> >> > Datum:   21.11.2009 20:53
> >> > Betreff: Re: Leadtek Winfast TV2100
> >> >
> >> >> Hey Terry,
> >> >>
> >> >> Thanks for your input. Yes it would seem that my tuner is not supported
> >> >> (it's a YMEC Tvision TVF88T5-B/DFF), and neither is my board. But I was
> >> >> hoping that an existing board/tuner combination might do the job.
> >> >>
> >> >> @Hermann - I tried card IDs 1-150 with tuner=69 and - alas - didn't get
> >> >> sound. Interestingly enough, almost all card ids produce a picture with this
> >> >> tuner. Also, I noticed that with some board IDs I'm getting clicks when
> >> >> muting/unmuting or switching channels, but no broadcast sound
> >> >> whatsoever...:(
> >> >
> >> > Tuner=69 covers a lot of tuners with TexasInstruments pll chip, NTSC and PAL.
> >> > I looked up this tuner from your previous mail and 69 is correct. You will note this when it comes to radio, UHF frequencies and takeover frequencies.
> >> >
> >> >> I also tried running regspy.exe (after booting to Windows) and performed the
> >> >> test as described on dscaler site. But the results are way to cryptic for
> >> >> me...I have no clue how to use this. So I'll paste it here, and maybe
> >> >> someone will be able to draw a conclusion:
> >> >>
> >> > Ah, good.
> >> >
> >> >> SAA7130 Card [0]:
> >> >>
> >> >> Vendor ID:           0x1131
> >> >> Device ID:           0x7130
> >> >> Subsystem ID:        0x6f3a107d
> >> >>
> >> >>
> >> >> 7 states dumped
> >> >>
> >> >> ----------------------------------------------------------------------------
> >> >> ------
> >> >>
> >> >> SAA7130 Card - State 0:
> >> >> SAA7134_GPIO_GPMODE:             80000009 * (10000000 00000000 00000000
> >> >> 00001001)
> >> >> SAA7134_GPIO_GPSTATUS:           0606200c * (00000110 00000110 00100000
> >> >> 00001100)
> >> >> SAA7134_ANALOG_IN_CTRL1:         c1         (11000001)
> >> >>
> >> >> SAA7134_ANALOG_IO_SELECT:        3b *       (00111011)
> >> >>
> >> >> SAA7134_VIDEO_PORT_CTRL0:        00000000   (00000000 00000000 00000000
> >> >> 00000000)
> >> >> SAA7134_VIDEO_PORT_CTRL4:        00000000   (00000000 00000000 00000000
> >> >> 00000000)
> >> >> SAA7134_VIDEO_PORT_CTRL8:        00         (00000000)
> >> >>
> >> >> SAA7134_I2S_OUTPUT_SELECT:       00         (00000000)
> >> >>
> >> >> SAA7134_I2S_OUTPUT_FORMAT:       01         (00000001)
> >> >>
> >> >> SAA7134_I2S_OUTPUT_LEVEL:        00         (00000000)
> >> >>
> >> >> SAA7134_I2S_AUDIO_OUTPUT:        01         (00000001)
> >> >>
> >> >> SAA7134_TS_PARALLEL:             04         (00000100)
> >> >>
> >> >> SAA7134_TS_PARALLEL_SERIAL:      00         (00000000)
> >> >>
> >> >> SAA7134_TS_SERIAL0:              00         (00000000)
> >> >>
> >> >> SAA7134_TS_SERIAL1:              00         (00000000)
> >> >>
> >> >> SAA7134_TS_DMA0:                 00         (00000000)
> >> >>
> >> >> SAA7134_TS_DMA1:                 00         (00000000)
> >> >>
> >> >> SAA7134_TS_DMA2:                 00         (00000000)
> >> >>
> >> >> SAA7134_SPECIAL_MODE:            01         (00000001)
> >> >>
> >> >>
> >> >>
> >> >> Changes: State 0 -> State 1:
> >> >> SAA7134_GPIO_GPMODE:             80000009 -> 8000000d  (-------- --------
> >> >> -------- -----0--)
> >> >> SAA7134_GPIO_GPSTATUS:           0606200c -> 00062000  (-----11- --------
> >> >> -------- ----11--)
> >> >> SAA7134_ANALOG_IO_SELECT:        3b       -> 00        (--111-11)
> >> >>
> >> >>
> >> >> 3 changes
> >> >>
> >> >>
> >> >> ----------------------------------------------------------------------------
> >> >> ------
> >> >>
> >> >> SAA7130 Card - State 1:
> >> >> SAA7134_GPIO_GPMODE:             8000000d   (10000000 00000000 00000000
> >> >> 00001101)  (was: 80000009)
> >> >> SAA7134_GPIO_GPSTATUS:           00062000 * (00000000 00000110 00100000
> >> >> 00000000)  (was: 0606200c)
> >> >> SAA7134_ANALOG_IN_CTRL1:         c1 *       (11000001)
> >> >>
> >> >> SAA7134_ANALOG_IO_SELECT:        00 *       (00000000)
> >> >>       (was: 3b)
> >> >> SAA7134_VIDEO_PORT_CTRL0:        00000000   (00000000 00000000 00000000
> >> >> 00000000)
> >> >> SAA7134_VIDEO_PORT_CTRL4:        00000000   (00000000 00000000 00000000
> >> >> 00000000)
> >> >> SAA7134_VIDEO_PORT_CTRL8:        00         (00000000)
> >> >>
> >> >> SAA7134_I2S_OUTPUT_SELECT:       00         (00000000)
> >> >>
> >> >> SAA7134_I2S_OUTPUT_FORMAT:       01         (00000001)
> >> >>
> >> >> SAA7134_I2S_OUTPUT_LEVEL:        00         (00000000)
> >> >>
> >> >> SAA7134_I2S_AUDIO_OUTPUT:        01         (00000001)
> >> >>
> >> >> SAA7134_TS_PARALLEL:             04         (00000100)
> >> >>
> >> >> SAA7134_TS_PARALLEL_SERIAL:      00         (00000000)
> >> >>
> >> >> SAA7134_TS_SERIAL0:              00         (00000000)
> >> >>
> >> >> SAA7134_TS_SERIAL1:              00         (00000000)
> >> >>
> >> >> SAA7134_TS_DMA0:                 00         (00000000)
> >> >>
> >> >> SAA7134_TS_DMA1:                 00         (00000000)
> >> >>
> >> >> SAA7134_TS_DMA2:                 00         (00000000)
> >> >>
> >> >> SAA7134_SPECIAL_MODE:            01         (00000001)
> >> >>
> >> >>
> >> >>
> >> >> Changes: State 1 -> State 2:
> >> >> SAA7134_GPIO_GPSTATUS:           00062000 -> 00062008  (-------- --------
> >> >> -------- ----0---)
> >> >> SAA7134_ANALOG_IN_CTRL1:         c1       -> 83        (-1----0-)
> >> >>
> >> >> SAA7134_ANALOG_IO_SELECT:        00       -> 09        (----0--0)
> >> >>
> >> >>
> >> >> 3 changes
> >> >>
> >> >>
> >> >> ----------------------------------------------------------------------------
> >> >> ------
> >> >>
> >> >> SAA7130 Card - State 2:
> >> >> SAA7134_GPIO_GPMODE:             8000000d   (10000000 00000000 00000000
> >> >> 00001101)
> >> >> SAA7134_GPIO_GPSTATUS:           00062008   (00000000 00000110 00100000
> >> >> 00001000)  (was: 00062000)
> >> >> SAA7134_ANALOG_IN_CTRL1:         83 *       (10000011)
> >> >>       (was: c1)
> >> >> SAA7134_ANALOG_IO_SELECT:        09         (00001001)
> >> >>       (was: 00)
> >> >> SAA7134_VIDEO_PORT_CTRL0:        00000000   (00000000 00000000 00000000
> >> >> 00000000)
> >> >> SAA7134_VIDEO_PORT_CTRL4:        00000000   (00000000 00000000 00000000
> >> >> 00000000)
> >> >> SAA7134_VIDEO_PORT_CTRL8:        00         (00000000)
> >> >>
> >> >> SAA7134_I2S_OUTPUT_SELECT:       00         (00000000)
> >> >>
> >> >> SAA7134_I2S_OUTPUT_FORMAT:       01         (00000001)
> >> >>
> >> >> SAA7134_I2S_OUTPUT_LEVEL:        00         (00000000)
> >> >>
> >> >> SAA7134_I2S_AUDIO_OUTPUT:        01         (00000001)
> >> >>
> >> >> SAA7134_TS_PARALLEL:             04         (00000100)
> >> >>
> >> >> SAA7134_TS_PARALLEL_SERIAL:      00         (00000000)
> >> >>
> >> >> SAA7134_TS_SERIAL0:              00         (00000000)
> >> >>
> >> >> SAA7134_TS_SERIAL1:              00         (00000000)
> >> >>
> >> >> SAA7134_TS_DMA0:                 00         (00000000)
> >> >>
> >> >> SAA7134_TS_DMA1:                 00         (00000000)
> >> >>
> >> >> SAA7134_TS_DMA2:                 00         (00000000)
> >> >>
> >> >> SAA7134_SPECIAL_MODE:            01         (00000001)
> >> >>
> >> >>
> >> >>
> >> >> Changes: State 2 -> State 3:
> >> >> SAA7134_ANALOG_IN_CTRL1:         83       -> c8        (-0--0-11)
> >> >>
> >> >>
> >> >> 1 changes
> >> >>
> >> >>
> >> >> ----------------------------------------------------------------------------
> >> >> ------
> >> >>
> >> >> SAA7130 Card - State 3:
> >> >> SAA7134_GPIO_GPMODE:             8000000d   (10000000 00000000 00000000
> >> >> 00001101)
> >> >> SAA7134_GPIO_GPSTATUS:           00062008 * (00000000 00000110 00100000
> >> >> 00001000)
> >> >> SAA7134_ANALOG_IN_CTRL1:         c8 *       (11001000)
> >> >>       (was: 83)
> >> >> SAA7134_ANALOG_IO_SELECT:        09 *       (00001001)
> >> >>
> >> >> SAA7134_VIDEO_PORT_CTRL0:        00000000   (00000000 00000000 00000000
> >> >> 00000000)
> >> >> SAA7134_VIDEO_PORT_CTRL4:        00000000   (00000000 00000000 00000000
> >> >> 00000000)
> >> >> SAA7134_VIDEO_PORT_CTRL8:        00         (00000000)
> >> >>
> >> >> SAA7134_I2S_OUTPUT_SELECT:       00         (00000000)
> >> >>
> >> >> SAA7134_I2S_OUTPUT_FORMAT:       01         (00000001)
> >> >>
> >> >> SAA7134_I2S_OUTPUT_LEVEL:        00         (00000000)
> >> >>
> >> >> SAA7134_I2S_AUDIO_OUTPUT:        01         (00000001)
> >> >>
> >> >> SAA7134_TS_PARALLEL:             04         (00000100)
> >> >>
> >> >> SAA7134_TS_PARALLEL_SERIAL:      00         (00000000)
> >> >>
> >> >> SAA7134_TS_SERIAL0:              00         (00000000)
> >> >>
> >> >> SAA7134_TS_SERIAL1:              00         (00000000)
> >> >>
> >> >> SAA7134_TS_DMA0:                 00         (00000000)
> >> >>
> >> >> SAA7134_TS_DMA1:                 00         (00000000)
> >> >>
> >> >> SAA7134_TS_DMA2:                 00         (00000000)
> >> >>
> >> >> SAA7134_SPECIAL_MODE:            01         (00000001)
> >> >>
> >> >>
> >> >>
> >> >> Changes: State 3 -> State 4:
> >> >> SAA7134_GPIO_GPSTATUS:           00062008 -> 04062004  (-----0-- --------
> >> >> -------- ----10--)
> >> >> SAA7134_ANALOG_IN_CTRL1:         c8       -> c1        (----1--0)
> >> >>                  (same as 0, 1)
> >> >> SAA7134_ANALOG_IO_SELECT:        09       -> 00        (----1--1)
> >> >>                  (same as 1)
> >> >>
> >> >> 3 changes
> >> >>
> >> >>
> >> >> ----------------------------------------------------------------------------
> >> >> ------
> >> >>
> >> >> SAA7130 Card - State 4:
> >> >> SAA7134_GPIO_GPMODE:             8000000d   (10000000 00000000 00000000
> >> >> 00001101)
> >> >> SAA7134_GPIO_GPSTATUS:           04062004 * (00000100 00000110 00100000
> >> >> 00000100)  (was: 00062008)
> >> >> SAA7134_ANALOG_IN_CTRL1:         c1         (11000001)
> >> >>       (was: c8)
> >> >> SAA7134_ANALOG_IO_SELECT:        00         (00000000)
> >> >>       (was: 09)
> >> >> SAA7134_VIDEO_PORT_CTRL0:        00000000   (00000000 00000000 00000000
> >> >> 00000000)
> >> >> SAA7134_VIDEO_PORT_CTRL4:        00000000   (00000000 00000000 00000000
> >> >> 00000000)
> >> >> SAA7134_VIDEO_PORT_CTRL8:        00         (00000000)
> >> >>
> >> >> SAA7134_I2S_OUTPUT_SELECT:       00         (00000000)
> >> >>
> >> >> SAA7134_I2S_OUTPUT_FORMAT:       01         (00000001)
> >> >>
> >> >> SAA7134_I2S_OUTPUT_LEVEL:        00         (00000000)
> >> >>
> >> >> SAA7134_I2S_AUDIO_OUTPUT:        01         (00000001)
> >> >>
> >> >> SAA7134_TS_PARALLEL:             04         (00000100)
> >> >>
> >> >> SAA7134_TS_PARALLEL_SERIAL:      00         (00000000)
> >> >>
> >> >> SAA7134_TS_SERIAL0:              00         (00000000)
> >> >>
> >> >> SAA7134_TS_SERIAL1:              00         (00000000)
> >> >>
> >> >> SAA7134_TS_DMA0:                 00         (00000000)
> >> >>
> >> >> SAA7134_TS_DMA1:                 00         (00000000)
> >> >>
> >> >> SAA7134_TS_DMA2:                 00         (00000000)
> >> >>
> >> >> SAA7134_SPECIAL_MODE:            01         (00000001)
> >> >>
> >> >>
> >> >>
> >> >> Changes: State 4 -> State 5:
> >> >> SAA7134_GPIO_GPSTATUS:           04062004 -> 02062000  (-----10- --------
> >> >> -------- -----1--)
> >> >>
> >> >> 1 changes
> >> >>
> >> >>
> >> >> ----------------------------------------------------------------------------
> >> >> ------
> >> >>
> >> >> SAA7130 Card - State 5:
> >> >> SAA7134_GPIO_GPMODE:             8000000d   (10000000 00000000 00000000
> >> >> 00001101)
> >> >> SAA7134_GPIO_GPSTATUS:           02062000 * (00000010 00000110 00100000
> >> >> 00000000)  (was: 04062004)
> >> >> SAA7134_ANALOG_IN_CTRL1:         c1         (11000001)
> >> >>
> >> >> SAA7134_ANALOG_IO_SELECT:        00 *       (00000000)
> >> >>
> >> >> SAA7134_VIDEO_PORT_CTRL0:        00000000   (00000000 00000000 00000000
> >> >> 00000000)
> >> >> SAA7134_VIDEO_PORT_CTRL4:        00000000   (00000000 00000000 00000000
> >> >> 00000000)
> >> >> SAA7134_VIDEO_PORT_CTRL8:        00         (00000000)
> >> >>
> >> >> SAA7134_I2S_OUTPUT_SELECT:       00         (00000000)
> >> >>
> >> >> SAA7134_I2S_OUTPUT_FORMAT:       01         (00000001)
> >> >>
> >> >> SAA7134_I2S_OUTPUT_LEVEL:        00         (00000000)
> >> >>
> >> >> SAA7134_I2S_AUDIO_OUTPUT:        01         (00000001)
> >> >>
> >> >> SAA7134_TS_PARALLEL:             04         (00000100)
> >> >>
> >> >> SAA7134_TS_PARALLEL_SERIAL:      00         (00000000)
> >> >>
> >> >> SAA7134_TS_SERIAL0:              00         (00000000)
> >> >>
> >> >> SAA7134_TS_SERIAL1:              00         (00000000)
> >> >>
> >> >> SAA7134_TS_DMA0:                 00         (00000000)
> >> >>
> >> >> SAA7134_TS_DMA1:                 00         (00000000)
> >> >>
> >> >> SAA7134_TS_DMA2:                 00         (00000000)
> >> >>
> >> >> SAA7134_SPECIAL_MODE:            01         (00000001)
> >> >>
> >> >>
> >> >>
> >> >> Changes: State 5 -> Register Dump:
> >> >> SAA7134_GPIO_GPSTATUS:           02062000 -> 06062008  (-----0-- --------
> >> >> -------- ----0---)
> >> >> SAA7134_ANALOG_IO_SELECT:        00       -> 02        (------0-)
> >> >>
> >> >>
> >> >> 2 changes
> >> >>
> >> >>
> >> >> ============================================================================
> >> >> =====
> >> >>
> >> >> SAA7130 Card - Register Dump:
> >> >> SAA7134_GPIO_GPMODE:             8000000d   (10000000 00000000 00000000
> >> >> 00001101)
> >> >> SAA7134_GPIO_GPSTATUS:           06062008   (00000110 00000110 00100000
> >> >> 00001000)  (was: 02062000)
> >> >> SAA7134_ANALOG_IN_CTRL1:         c1         (11000001)
> >> >>
> >> >> SAA7134_ANALOG_IO_SELECT:        02         (00000010)
> >> >>       (was: 00)
> >> >> SAA7134_VIDEO_PORT_CTRL0:        00000000   (00000000 00000000 00000000
> >> >> 00000000)
> >> >> SAA7134_VIDEO_PORT_CTRL4:        00000000   (00000000 00000000 00000000
> >> >> 00000000)
> >> >> SAA7134_VIDEO_PORT_CTRL8:        00         (00000000)
> >> >>
> >> >> SAA7134_I2S_OUTPUT_SELECT:       00         (00000000)
> >> >>
> >> >> SAA7134_I2S_OUTPUT_FORMAT:       01         (00000001)
> >> >>
> >> >> SAA7134_I2S_OUTPUT_LEVEL:        00         (00000000)
> >> >>
> >> >> SAA7134_I2S_AUDIO_OUTPUT:        01         (00000001)
> >> >>
> >> >> SAA7134_TS_PARALLEL:             04         (00000100)
> >> >>
> >> >> SAA7134_TS_PARALLEL_SERIAL:      00         (00000000)
> >> >>
> >> >> SAA7134_TS_SERIAL0:              00         (00000000)
> >> >>
> >> >> SAA7134_TS_SERIAL1:              00         (00000000)
> >> >>
> >> >> SAA7134_TS_DMA0:                 00         (00000000)
> >> >>
> >> >> SAA7134_TS_DMA1:                 00         (00000000)
> >> >>
> >> >> SAA7134_TS_DMA2:                 00         (00000000)
> >> >>
> >> >> SAA7134_SPECIAL_MODE:            01         (00000001)
> >> >>
> >> >>
> >> >> end of dump
> >> >>
> >> >> Here is the order in which I performed the test:State 6
> >> >> State 0 - viewing software off
> >> >> State 1 - tuner mode
> >> >> State 2 - composite mode
> >> >> State 3 - s video mode
> >> >> State 4 - radio mode
> >> >> State 5 - tuner mode (again)
> >> >> Final dump - viewing software off (again)
> >> >>
> >> >> Thanks to everyone for your help.
> >> >>
> >> >> Pavle.
> >> >>
> >> >
> >> > Better don't top post. Becomes hard to read after a while.
> >> >
> >> > You would try wsith a gpio_mask = 0x0d.
> >> >
> >> > .gpio for TV is 0x00000000 (default, don't even need to set it).
> >> >
> >> > For s-video and composite 0x08.
> >> >
> >> > For radio 0x04.
> >> >
> >> > On saa7130 chips mono audio from tuner in most cases is connected to LINE2.
> >> >
> >> > Then also radio is on LINE2 and s-video and composite on LINE1.
> >> >
> >> > For .mute it seems to switch to s-video/composite LINE input and keeps that input open with .gpio 0x08.
> >> >
> >> > Maybe Terry knows better.
> >> >
> >> > Good luck for testing.
> >> >
> >> > Cheers,
> >> > Hermann
> >> >
> >> >>
> >> >> ________________________________
> >> >> From: Terry Wu <terrywu2009@xxxxxxxxx>
> >> >> To: hermann pitton <hermann-pitton@xxxxxxxx>
> >> >> Cc: Pavle Predic <pavle.predic@xxxxxxxxxxx>; video4linux-list@xxxxxxxxxx
> >> >> Sent: Sat, 21 November, 2009 10:07:05
> >> >> Subject: Re: Leadtek Winfast TV2100
> >> >>
> >> >> Hi,
> >> >>
> >> >>     There are many models of TV2100.
> >> >>     Different model uses different TV tuner.
> >> >>
> >> >>     The tuner 69 is TUNER_TNF_5335MF.
> >> >>     Make sure the tuner in your TV2100 card is the TNF_5335MF.
> >> >>
> >> >>     Maybe the tuner in your TV2100 card is not supported by current
> >> >> v4l-dvb driver yet (linux\include\media\tuner.h).
> >> >>
> >> >>
> >> >> Terry
> >> >>
> >> >> 2009/11/21 hermann pitton <hermann-pitton@xxxxxxxx>:
> >> >> > Hi Pavle,
> >> >> >
> >> >> > Am Freitag, den 20.11.2009, 14:11 +0000 schrieb Pavle Predic:
> >> >> >> Hi Hermann,
> >> >> >>
> >> >> >> Thank you so much for your help. I didn't really get most of what you
> >> >> >> said (way to technical for me), but at least I know now which tuner I
> >> >> >> should use, so I'll keep testing with tuner 69 and see if I get
> >> >> >> results.
> >> >> >
> >> >> > that one should be right, especially for analog radio.
> >> >> >
> >> >> >> BTW, I'm not from UK - I'm from Serbia and I'm trying to make the card
> >> >> >> work for my cable tv which uses PAL BG (at least so they say).
> >> >> >
> >> >> > Lots of people are on the move these days, therefore it is important to
> >> >> > know too, what they might carry with them. That tuner should be fine
> >> >> > then.
> >> >> >
> >> >> >> I'll report back after testing on tuner 69 (I'll simply try all card
> >> >> >> ids with this tuner id). In the meantime here's some more info:
> >> >> >
> >> >> > Better is to follow the advice how you can narrow down such stuff.
> >> >> >
> >> >> > As far I know, we have not destroyed a single device yet on the saa7134
> >> >> > driver, but to go over all possibilities, concerning voltage and gpios,
> >> >> > has some risks and is not the shortest way to come closer.
> >> >> >
> >> >> > Thanks for your input.
> >> >> >
> >> >> > Cheers,
> >> >> > Hermann
> >> >> >
> >> >> >> dmesg:
> >> >> >>
> >> >> >> [    9.829338] saa7130/34: v4l2 driver version 0.2.15 loaded
> >> >> >> [    9.829408] saa7134 0000:00:08.0: PCI INT A -> GSI 17 (level, low)
> >> >> >> -> IRQ 17
> >> >> >> [    9.829419] saa7130[0]: found at 0000:00:08.0, rev: 1, irq: 17,
> >> >> >> latency: 64, mmio: 0xfdffe000
> >> >> >> [    9.829428] saa7130[0]: subsystem: 107d:6f3a, board:
> >> >> >> UNKNOWN/GENERIC [card=0,autodetected]
> >> >> >> [    9.829458] saa7130[0]: board init: gpio is 6200c
> >> >> >> [    9.829465] IRQ 17/saa7130[0]: IRQF_DISABLED is not guaranteed on
> >> >> >> shared IRQs
> >> >> >> [    9.980513] saa7130[0]: i2c eeprom 00: 7d 10 3a 6f 54 20 1c 00 43
> >> >> >> 43 a9 1c 55 d2 b2 92
> >> >> >> [    9.980532] saa7130[0]: i2c eeprom 10: 0c ff 82 0e ff 20 ff ff ff
> >> >> >> ff ff ff ff ff ff ff
> >> >> >> [    9.980547] saa7130[0]: i2c eeprom 20: 01 40 02 03 03 02 01 03 08
> >> >> >> ff 00 8c ff ff ff ff
> >> >> >> [    9.980562] saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff
> >> >> >> ff ff ff ff ff ff ff
> >> >> >> [    9.980578] saa7130[0]: i2c eeprom 40: 50 89 00 c2 00 00 02 30 02
> >> >> >> ff ff ff ff ff ff ff
> >> >> >> [    9.980593] saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff
> >> >> >> ff ff ff ff ff ff ff
> >> >> >> [    9.980608] saa7130[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff
> >> >> >> ff ff ff ff ff ff ff
> >> >> >> [    9.980623] saa7130[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff
> >> >> >> ff ff ff ff ff ff ff
> >> >> >> [    9.980639] saa7130[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff
> >> >> >> ff ff ff ff ff ff ff
> >> >> >> [    9.980654] saa7130[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff
> >> >> >> ff ff ff ff ff ff ff
> >> >> >> [    9.980670] saa7130[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff
> >> >> >> ff ff ff ff ff ff ff
> >> >> >> [    9.980685] saa7130[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff
> >> >> >> ff ff ff ff ff ff ff
> >> >> >> [    9.980701] saa7130[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff
> >> >> >> ff ff ff ff ff ff ff
> >> >> >> [    9.980716] saa7130[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff
> >> >> >> ff ff ff ff ff ff ff
> >> >> >> [    9.980731] saa7130[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff
> >> >> >> ff ff ff ff ff ff ff
> >> >> >> [    9.980747] saa7130[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff
> >> >> >> ff ff ff ff ff ff ff
> >> >> >> [    9.980876] saa7130[0]: registered device video0 [v4l2]
> >> >> >> [    9.980908] saa7130[0]: registered device vbi0
> >> >> >>
> >> >> >>
> >> >> >> lsmod:
> >> >> >>
> >> >> >> saa7134               135552  0
> >> >> >> ir_common              47172  1 saa7134
> >> >> >> v4l2_common            14308  1 saa7134
> >> >> >> videodev               31040  2 saa7134,v4l2_common
> >> >> >> videobuf_dma_sg        11340  1 saa7134
> >> >> >> videobuf_core          16164  2 saa7134,videobuf_dma_sg
> >> >> >> tveeprom               10720  1 saa7134
> >> >> >> i2c_core               20844  4
> >> >> >> i2c_viapro,saa7134,v4l2_common,tveeprom
> >> >> >>
> >> >> >> lspci:
> >> >> >>
> >> >> >> 00:08.0 Multimedia controller [0480]: Philips Semiconductors SAA7130
> >> >> >> Video Broadcast Decoder [1131:7130] (rev 01)
> >> >> >>     Subsystem: LeadTek Research Inc. Device [107d:6f3a]
> >> >> >>     Flags: bus master, medium devsel, latency 64, IRQ 17
> >> >> >>     Memory at fdffe000 (32-bit, non-prefetchable) [size=1K]
> >> >> >>     Capabilities: [40] Power Management version 1
> >> >> >>     Kernel driver in use: saa7134
> >> >> >>     Kernel modules: saa7134
> >> >> >>
> >> >> >> Thanks again,
> >> >> >>
> >> >> >> Pavle.
> >> >> >>
> >> >> >>
> >> >> >>
> >> >> >>
> >> >> >>
> >> >> >> ______________________________________________________________________
> >> >> >> From: hermann pitton <hermann-pitton@xxxxxxxx>
> >> >> >> To: Pavle Predic <pavle.predic@xxxxxxxxxxx>
> >> >> >> Cc: video4linux-list@xxxxxxxxxx
> >> >> >> Sent: Sun, 8 November, 2009 23:35:08
> >> >> >> Subject: Re: Leadtek Winfast TV2100
> >> >> >>
> >> >> >> Hi Pavle,
> >> >> >>
> >> >> >> Am Sonntag, den 08.11.2009, 17:11 +0000 schrieb Pavle Predic:
> >> >> >> > Did anyone manage to get this card working on Linux? I got the
> >> >> >> picture out of the box, but it's impossible to get any sound from the
> >> >> >> damned thing. The card is not on CARDLIST.saa7134, but I assume a
> >> >> >> similar card/tuner combination can be used. But which? By the way, I
> >> >> >> got the speakers connected directly to card output, I'm not even
> >> >> >> trying to get it working with my sound card. I can hear clicks when
> >> >> >> loading/unloading modules, so it's alive but not set up properly.
> >> >> >> >
> >> >> >> > Any info would be greatly appreciated. Perhaps someone knows of
> >> >> >> another card that is similar to this one?
> >> >> >> >
> >> >> >> > Card info:
> >> >> >> > Chipset: saa7134
> >> >> >> > Tuner: Tvision TVF88T5-B/DFF
> >> >> >> > Card numbers that produce picture (modprobe saa7134 card=$n): 3, 7,
> >> >> >> 10, 16, 34, 35, 45, 46, 47, 48, 51, 63, 64, 68
> >> >> >>
> >> >> >> that is not enough information yet.
> >> >> >>
> >> >> >> The correct tuner for this one is tuner=69.
> >> >> >>
> >> >> >> Only with this one you will have also radio support.
> >> >> >>
> >> >> >> Since you mail from an UK mail provider, this tuner is not expected to
> >> >> >> work with PAL-I TV stereo sound there, but radio would work.
> >> >> >>
> >> >> >> Else, if neither amux = TV nor amux = LINE1 or LINE2 (LINE inputs for
> >> >> >> TV
> >> >> >> sound are only found on saa7130 chips, except there is also an extra
> >> >> >> TV
> >> >> >> mono section directly from the tuner)  work for TV sound, most often
> >> >> >> an
> >> >> >> external audio mux is in the way and needs to be configured correctly
> >> >> >> with saa7134 gpio pins. Looking also at the minor chips on the card
> >> >> >> with
> >> >> >> more than 3 pins can reveal such a mux.
> >> >> >>
> >> >> >> There is also a software test on such hardware, succeeding in most
> >> >> >> cases.
> >> >> >>
> >> >> >> By default, external analog audio input is looped through to analog
> >> >> >> audio out, on which you are listening, if the driver is unloaded.
> >> >> >>
> >> >> >> On a saa7134 chip, on saa7130 are some known specials, you should hear
> >> >> >> the incoming sound directly on your headphones or what else you might
> >> >> >> be
> >> >> >> using directly connected to your card, trying on LINE1 and LINE2 for
> >> >> >> that.
> >> >> >>
> >> >> >> If not, you can expect that such a mux chip needs to be treated
> >> >> >> correctly.
> >> >> >>
> >> >> >> The DScaler (deinterlace.sf.net) regspy.exe often can help to identify
> >> >> >> such gpios in use, else you must trace lines and resistors on it.
> >> >> >>
> >> >> >> In general, an absolute minimum is to provide related "dmesg" after
> >> >> >> loading the driver _without_ having tried on other cards previously.
> >> >> >>
> >> >> >> Please read more on the linuxtv.org wiki about adding support for a
> >> >> >> new
> >> >> >> card.
> >> >> >>
> >> >> >> Cheers,
> >> >> >> Hermann
> >> >> >
> >> >> >
> >
> >
> >

Attachment: sn761677.pdf
Description: Adobe PDF document

--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list