Re: saa7134, help with integrated remote!
- Date: Fri, 26 Jun 2009 23:53:44 +0200
- From: hermann pitton <hermann-pitton@xxxxxxxx>
- Subject: Re: saa7134, help with integrated remote!
Am Donnerstag, den 25.06.2009, 22:38 +0530 schrieb Vikraman Choudhury:
> Hi, I have an analog TV tuner card (Enter 210-TV --
> http://www.entermultimedia.com/tv_tuner_internal.html) with a Philips
> SAA7134 chipset.
> I can tune to all channels (PAL) by loading the module saa7134 passing
> card=106 (card=3,10,42 , tuner=37,69 also work), and get audio using the
> line-in cable.
> However, I can't get the integrated ir remote to work, using any of the
> above options. The device saa7134 IR is detected as /dev/input/event7, but
> cat /dev/input/event7 either doesn't show any output or spits out the same
> code repeatedly (without the remote pressed). I understand this means that
> the card is not the model passed as argument. But, is there any possible way
> to find the correct card= and tuner= configuration ?
> System: Gentoo 2008.0 with vanilla-sources 2.6.30 CFLAGS="-O2
> -march=pentium4 -pipe -fomit-frame-pointer" CHOST="i686-pc-linux-gnu"
> Output from dmesg (options saa7134 card=106 in /etc/modprobe.conf) :
> [ 3.210960] saa7130/34: v4l2 driver version 0.2.15 loaded
> [ 3.211039] saa7134 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ
> [ 3.211048] saa7130: found at 0000:01:00.0, rev: 1, irq: 18, latency:
> 32, mmio: 0xe8000000
> [ 3.211057] saa7130: subsystem: 1131:0000, board: 10MOONS TM300 TV
> Card [card=116,insmod option]
> [ 3.211077] saa7130: board init: gpio is 17f00
> [ 3.211177] input: saa7134 IR (10MOONS TM300 TV Ca as
> [ 3.211247] IRQ 18/saa7130: IRQF_DISABLED is not guaranteed on shared
> [ 3.312299] saa7130: Huh, no eeprom present (err=-5)?
> [ 3.328111] tuner 1-0061: chip found @ 0xc2 (saa7130)
> [ 3.330042] tuner-simple 1-0061: creating new instance
> [ 3.330048] tuner-simple 1-0061: type set to 37 (LG PAL (newer TAPC
> [ 3.336196] saa7130: registered device video0 [v4l2]
> [ 3.336224] saa7130: registered device vbi0
we have lots of cards without eeprom like yours, especially with saa7130
chips and you can't tell much about them without having them.
For all the old tuners on them it is the same, if you don't look them
up, but tuner=69 covers a lot of them. Tuner=37 might fail on UHF I
If you boot without forcing any other card previously, the gpio init of
the card is the only thin trace to something it might have in common
with others already or makes it unique.
For "board init: gpio is 17f00" I seem not to find any trace in the
archives and also not on the bttv-gallery.
If the gpio init stays unchanged, you likely have to do the remote
If you can identify an IR micro controller on the board with connections
to the gpio pins of the saa7130, you might find it on the
http://www.bttv-gallery.de already on other cards too.
The pinning of the saa7130 is available from Philps/NXP and links to
such information can be found on the wiki.
Also some instructions about how to get such stuff working.
Basically you start with a mask_keycode 0x0 for a device in
saa7134-input.c you are using to see all activity caused by the remote
on the gpio pins. Then you try to find the keydown/up button and further
all other gpios in use to get unique code for each button.
Recent remotes are often more tricky, but for now I would not expect
those on your hardware.
BTW, we changed to linux-media@xxxxxxxxxxxxxxxx
video4linux-list mailing list