Re: TYPO [Hauppauge WinTV-hvr-1800 PCIe won't work with tvtime or mplayer.]
- Date: Mon, 11 May 2009 00:16:48 -0400
- From: William Case <billlinux@xxxxxxxxxx>
- Subject: Re: TYPO [Hauppauge WinTV-hvr-1800 PCIe won't work with tvtime or mplayer.]
On Sun, 2009-05-10 at 23:45 -0400, William Case wrote:
> Hi CityK;
> On Sun, 2009-05-10 at 20:33 -0400, CityK wrote:
> > William Case wrote:
> > Note: cx88 associated modules do NOT apply to this device (cx88 driver
> > modules are for the PCI based cx2388x chipsets, where x=0/1,2,3). This
> > is a PCIe based device which is serviced, amongst others, by the cx23885
> > driver module.
> I have removed all the extra modules I have been playing with and
> removed any modprobe instructions I had been trying.
> > Also, have a look in the wiki for the device article which appears to
> > contain some info that would be useful for you.
> I re-installed v4l-dvb-4c7466ea8d64.tar.bz2, as suggested on the wiki.
> The extracted files are in /lib/modules/["kernel
> version"]/kernel/drivers/media with today's installation date. (last
> > With a hardware encoding device, the /dev/video0 should be the MPEG2
> > stream whereas /dev/video1 would be the raw stream compatible with apps
> > like tvtime. mplayer /dev/video0 should work. .... note that the node
> > number (N) of the character device (/dev/videoN) will be different if
> > you have multiple devices installed in the system, so you will have to
> > adjust accordingly.
> I am trying to set up analog viewing through my cable provider.
> tvtime.xml is set to video0. It still gives me an excellent picture but
> no sound. video1 just gives me a black screen - no sound.
> On mplayer device=/dev/video0 remains the same --terrible picture; no
> sound. mplayer device=/dev/video0 produces the error message
> 'vo: x11 uninit called but X11 not initialized..' and quits.
mplayer device=/dev/video1 produces the error message 'vo: x11 uninit
called but X11 not initialized..' and quits.
> The mplayer script I am using is a slightly modified copy of the command
> suggested on the wiki.
> Basically the info I submitted originally remains the same except the
> cx2388x modules are gone.
> Usually I like to work away at these kind problems until I conquer them
> myself. But I have been on this one for over two weeks and I am driving
> myself to distraction. I really do appreciate your time and advice.
Fedora 10, Gnome 2.24.3
Evo.2.24.5, Emacs 22.3.1
video4linux-list mailing list