Re: Phillips Semiconductors based card not working
- Date: Sun, 03 May 2009 02:04:31 +0200
- From: hermann pitton <hermann-pitton@xxxxxxxx>
- Subject: Re: Phillips Semiconductors based card not working
Am Samstag, den 02.05.2009, 18:20 -0300 schrieb Pablitt:
> Hi all
> i have this tv card
> (sudo lspci -vnn)
> 00:0e.0 Multimedia controller : Philips Semiconductors
> SAA7131/SAA7133/SAA7135 Video Broadcast Decoder [1131:7133] (rev d1)
> Subsystem: Philips Semiconductors Device [1131:0000]
> Flags: bus master, medium devsel, latency 64, IRQ 19
> Memory at fac00000 (32-bit, non-prefetchable) [size=2K]
> Capabilities:  Power Management version 2
> Kernel driver in use: saa7134
> Kernel modules: saa7134
> it stopped working after upgrade from hardy to intrepid, i think it has
> something to do with the new kernels...
> i used to use the options card and tuner but i cant remember which
> parameters and i'm tryng different parms with no luck
> does anyone got this card working in ubuntu jaunty? if so, wich parameters?
> thanks in advance
> More info:
> dmesg | grep saa
> [ 17.097515] saa7130/34: v4l2 driver version 0.2.14 loaded
> [ 17.097687] saa7134 0000:00:0e.0: PCI INT A -> GSI 19 (level, low) -> IRQ
> [ 17.097698] saa7133: found at 0000:00:0e.0, rev: 209, irq: 19,
> latency: 64, mmio: 0xfac00000
> [ 17.097705] saa7133: subsystem: 1131:0000, board: UNKNOWN/GENERIC
> [ 17.097802] saa7133: board init: gpio is 40
> [ 17.200225] saa7133: Huh, no eeprom present (err=-5)?
> [ 17.200681] saa7133: registered device video0 [v4l2]
> [ 17.200728] saa7133: registered device vbi0
> [ 17.213091] saa7134 ALSA driver for DMA sound loaded
> [ 17.213127] saa7133/alsa: saa7133 at 0xfac00000 irq 19 registered
> as card -2
> Kernel version 2.6.28-11-generic
the driver has no way to identify your card, since it has no eeprom and
hence no valid PCI subsytem.
That is why you get card=0 UNKNWON/GENERIC after you don't know your
card and tuner number anymore.
We only know it has either a saa7133/35 or 31e chip.
There is a slight chance to identify it over the
"board init: gpio is 40" string, but I'm quite sure it is not unique
Look at the card and tuner and eventually remaining packaging material.
In such a case we unfortunately can't help much, unless you provide some
more information about the hardware or remember yourself looking at the
CARDLIST.saa7134 in video4linux Documentation.
video4linux-list mailing list