Web lists-archives.com

Re: [PATCH] FM1216ME_MK3 some changes




Hi All

Step by step.

This is patch for change only range of FM1216ME_MK3. Slow tunning is not a big problem.

diff -r b40d628f830d linux/drivers/media/common/tuners/tuner-types.c
--- a/linux/drivers/media/common/tuners/tuner-types.c	Fri Apr 24 01:46:41 2009 -0300
+++ b/linux/drivers/media/common/tuners/tuner-types.c	Tue Apr 28 03:35:42 2009 +1000
@@ -558,8 +558,8 @@
 
 static struct tuner_range tuner_fm1216me_mk3_pal_ranges[] = {
 	{ 16 * 158.00 /*MHz*/, 0x8e, 0x01, },
-	{ 16 * 442.00 /*MHz*/, 0x8e, 0x02, },
-	{ 16 * 999.99        , 0x8e, 0x04, },
+	{ 16 * 441.00 /*MHz*/, 0x8e, 0x02, },
+	{ 16 * 864.00        , 0x8e, 0x04, },
 };
 
 static struct tuner_params tuner_fm1216me_mk3_params[] = {

Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@xxxxxxxxx>


With my best regards, Dmitry.

> Hi Dmitri,
> 
> Thank you for you responses.
> 
> Just a few more comments...
> 
> On Thu, 2009-04-23 at 20:36 +1000, Dmitri Belimov wrote:
> > Hi Andy
> > 
> > > Dmitri,
> > > 
> > > 
> > > On Wed, 2009-04-22 at 17:48 +1000, Dmitri Belimov wrote:
> > > > Hi All
> > > > 
> > > > 1. Change middle band. In the end of the middle band the
> > > > sensitivity of receiver not good. If we switch to higher band,
> > > > sensitivity more better. Hardware trick.
> > > 
> 
> > Several years a go your customers write some messages about bad
> > quality of TV if frequency of TV is the end of band. It can be low
> > band or middle. Our hardware engeneer make some tests with hardware
> > TV generator and our TV tuners.
> > 
> > If we set default frequency range for low and middle band, quality
> > of TV signal on 159MHz and 442 MHz is bad. When we make our changes
> > with moving end of bands the quality of TV much better. And our
> > system programmer for OS Windows use changed bands for drivers.
> > Customers be happy.
> 
> OK.  A properly run experiment wins over theory every time. :)
> 
> 
> 
> > You can test it if in your placement available TV programm on
> > 159MHz or 442MHz. This trick can be usefull for other tuners.
> 
> If you look at tveeprom.c, a number of other tuners are using that
> tuner definition:
> 
> $ grep FM1216ME_MK3 tveeprom.c
> 	{ TUNER_PHILIPS_FM1216ME_MK3, 	"Philips FQ1216ME MK3"},
> 	{ TUNER_PHILIPS_FM1216ME_MK3, 	"Philips FM1216 ME
> MK3"}, { TUNER_PHILIPS_FM1216ME_MK3, 	"LG S001D MK3"},
> 	{ TUNER_PHILIPS_FM1216ME_MK3, 	"LG S701D MK3"},
> 	{ TUNER_PHILIPS_FM1216ME_MK3, 	"Philips FQ1216LME
> MK3"}, { TUNER_PHILIPS_FM1216ME_MK3, 	"TCL MFPE05 2"},
> 	{ TUNER_PHILIPS_FM1216ME_MK3, 	"TCL MPE05-2"},
> 	{ TUNER_PHILIPS_FM1216ME_MK3, 	"Philips FM1216ME MK5"},
> 
> If your change makes things bad for the other tuners, we'll probably
> have to create an alternate entry for the other tuners instead of
> using the FM1216ME_MK3 defintion.  I suspect most of them are clones
> of the FM1216ME MK3 however, so it probably won't matter.
> 
> > > > 3. Set charge pump bit
> > > 
> > > This will improve the time to initially tune to a frequency, but
> > > will likely add some noise as the PLL continues to maintain lock
> > > on the signal.  If there is no way to turn off the CP after the
> > > lock bit is set in the tuner, it's probably better to leave it
> > > off for lower noise and just live with slower tuning.
> > 
> > We discuss with our windows system programmer about it. He sad that
> > in analog TV mode noise from PLL don't give any problem.
> 
> I would be concerned about phase noise affecting the colors or any FM
> sound carriers.  If the noise isn't noticably affecting colors to the
> human eye (do color bars look OK?), or sound to the human ear, then
> OK.
> 
> 
> >  But in digital TV mode
> > noise from PLL decreased BER.
> 
> I thought the FM1216ME MK3 was an analog only tuner.  I guess I don't
> know DVB-T or cable in Europe well enough.
> 
> 
> > > Leaving the CP bit set should be especially noticable ad FM noise
> > > when set to tune to FM radio stations.  From the FM1236ME_MK3
> > > datasheet: "It is recommended to set CP=0 in the FM mode at all
> > > times." But the VHF low band control byte is also used when
> > > setting FM radio (AFAICT with a quick look at the code.)
> > 
> > Yes. You are right. We can swith CP off in FM mode.
> 
> OK.  Thank you.
> 
> > With my best regards, Dmitry.
> 
> 
> Regards,
> Andy
> 
> 
> 
diff -r b40d628f830d linux/drivers/media/common/tuners/tuner-types.c
--- a/linux/drivers/media/common/tuners/tuner-types.c	Fri Apr 24 01:46:41 2009 -0300
+++ b/linux/drivers/media/common/tuners/tuner-types.c	Tue Apr 28 03:35:42 2009 +1000
@@ -558,8 +558,8 @@
 
 static struct tuner_range tuner_fm1216me_mk3_pal_ranges[] = {
 	{ 16 * 158.00 /*MHz*/, 0x8e, 0x01, },
-	{ 16 * 442.00 /*MHz*/, 0x8e, 0x02, },
-	{ 16 * 999.99        , 0x8e, 0x04, },
+	{ 16 * 441.00 /*MHz*/, 0x8e, 0x02, },
+	{ 16 * 864.00        , 0x8e, 0x04, },
 };
 
 static struct tuner_params tuner_fm1216me_mk3_params[] = {

Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@xxxxxxxxx>
--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list