Web lists-archives.com

Re: [Spca50x-devs] 046d:08d9 - works with gspca-modules but not 2.6.27-rc3




Jean-Francois Moine wrote, on 30/08/08 15:42:

You have cloned my mercurial tree in '/usr/src/gspca'. Do:

	cd /usr/src/gspca
	cp /usr/src/linux-2.6.27-rc4/.config v4l/
	make menuconfig
		(or 'make gconfig'...)

In menuconfig, add the GSPCA driver if it is not set.
Then do:

	make
	sudo make install

This last command will overwrite all the V4L modules
of /lib/modules/`uname -r`/kernel/drivers/media/).
This is normal.

If your webcam was connected, unplug it and, as root, do:

	rmmod gspca_zc3xx
	rmmod gspca_main

Then plug the webcam. There should be no error looking at:

	dmesg | tail

Best regards.


Although the attached log file looks successful, I still get a green screen when using the web-cam via vlc.

Any further suggestions?

Thanks for your help so far,

Arthur.
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.27-rc4 (2.6.27~rc4) (root@symone) (gcc version 4.3.1 (Debian 4.3.1-9) ) #1 SMP PREEMPT Fri Aug 29 21:29:28 CST 2008
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000002fff0000 (usable)
[    0.000000]  BIOS-e820: 000000002fff0000 - 000000002fff3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000002fff3000 - 0000000030000000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[    0.000000] last_pfn = 0x2fff0 max_arch_pfn = 0x100000
[    0.000000] kernel direct mapping tables up to 2fff0000 @ 7000-d000
[    0.000000] RAMDISK: 2f962000 - 2ffdf8f5
[    0.000000] DMI 2.2 present.
[    0.000000] ACPI: RSDP 000F75C0, 0014 (r0 Nvidia)
[    0.000000] ACPI: RSDT 2FFF3000, 002C (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
[    0.000000] ACPI: FACP 2FFF3040, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
[    0.000000] ACPI: DSDT 2FFF30C0, 43E7 (r1 NVIDIA AWRDACPI     1000 MSFT  100000E)
[    0.000000] ACPI: FACS 2FFF0000, 0040
[    0.000000] ACPI: APIC 2FFF74C0, 006E (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 767MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 2fff0000
[    0.000000]   low ram: 00000000 - 2fff0000
[    0.000000]   bootmap 00009000 - 0000f000
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 002fff0000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000100000 - 0000430aa8]    TEXT DATA BSS ==> [0000100000 - 0000430aa8]
[    0.000000]   #4 [002f962000 - 002ffdf8f5]          RAMDISK ==> [002f962000 - 002ffdf8f5]
[    0.000000]   #5 [0000431000 - 0000434000]    INIT_PG_TABLE ==> [0000431000 - 0000434000]
[    0.000000]   #6 [000009f000 - 0000100000]    BIOS reserved ==> [000009f000 - 0000100000]
[    0.000000]   #7 [0000007000 - 0000009000]          PGTABLE ==> [0000007000 - 0000009000]
[    0.000000]   #8 [0000009000 - 000000f000]          BOOTMAP ==> [0000009000 - 000000f000]
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x0002fff0
[    0.000000]   HighMem  0x0002fff0 -> 0x0002fff0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x000000a0
[    0.000000]     0: 0x00000100 -> 0x0002fff0
[    0.000000] On node 0 totalpages: 196496
[    0.000000] free_area_init_node: node 0, pgdat c0365180, node_mem_map c1000000
[    0.000000]   DMA zone: 3968 pages, LIFO batch:0
[    0.000000]   Normal zone: 190992 pages, LIFO batch:31
[    0.000000] Nvidia board detected. Ignoring ACPI timer override.
[    0.000000] If you got timer trouble try acpi_use_timer_override
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] mapped APIC to ffffb000 (fee00000)
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 30000000:cec00000)
[    0.000000] PERCPU: Allocating 37536 bytes of per cpu data
[    0.000000] NR_CPUS: 8, nr_cpu_ids: 1, nr_node_ids 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 194960
[    0.000000] Kernel command line: root=/dev/hda2 ro 
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] TSC calibrated against PM_TIMER
[    0.000000] Detected 1531.016 MHz processor.
[    0.004000] Console: colour VGA+ 80x25
[    0.004000] console [tty0] enabled
[    0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.004000] Memory: 768900k/786368k available (1851k kernel code, 16956k reserved, 725k data, 264k init, 0k highmem)
[    0.004000] virtual kernel memory layout:
[    0.004000]     fixmap  : 0xfff50000 - 0xfffff000   ( 700 kB)
[    0.004000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.004000]     vmalloc : 0xf0800000 - 0xff7fe000   ( 239 MB)
[    0.004000]     lowmem  : 0xc0000000 - 0xefff0000   ( 767 MB)
[    0.004000]       .init : 0xc038b000 - 0xc03cd000   ( 264 kB)
[    0.004000]       .data : 0xc02cee56 - 0xc0384338   ( 725 kB)
[    0.004000]       .text : 0xc0100000 - 0xc02cee56   (1851 kB)
[    0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[    0.008000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3062.03 BogoMIPS (lpj=6124064)
[    0.008000] Security Framework initialized
[    0.008000] SELinux:  Disabled at boot.
[    0.008000] Mount-cache hash table entries: 512
[    0.008000] Initializing cgroup subsys ns
[    0.008000] Initializing cgroup subsys cpuacct
[    0.008000] Initializing cgroup subsys devices
[    0.008000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.008000] CPU: L2 Cache: 256K (64 bytes/line)
[    0.008000] Intel machine check architecture supported.
[    0.008000] Intel machine check reporting enabled on CPU#0.
[    0.008000] Checking 'hlt' instruction... OK.
[    0.024001] SMP alternatives: switching to UP code
[    0.028001] Freeing SMP alternatives: 9k freed
[    0.028001] ACPI: Core revision 20080609
[    0.036002] ENABLING IO-APIC IRQs
[    0.036002] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[    0.076004] CPU0: AMD Athlon(tm) XP 1800+ stepping 02
[    0.076004] Brought up 1 CPUs
[    0.076004] Total of 1 processors activated (3062.03 BogoMIPS).
[    0.076004] CPU0 attaching sched-domain:
[    0.076004]  domain 0: span 0 level CPU
[    0.076004]   groups: 0
[    0.076004] net_namespace: 840 bytes
[    0.076004] Booting paravirtualized kernel on bare hardware
[    0.076004] NET: Registered protocol family 16
[    0.076004] ACPI: bus type pci registered
[    0.108006] PCI: PCI BIOS revision 2.10 entry at 0xfb4a0, last bus=2
[    0.108006] PCI: Using configuration type 1 for base access
[    0.108006] ACPI: EC: Look up EC in DSDT
[    0.116007] ACPI: Interpreter enabled
[    0.116007] ACPI: (supports S0 S1 S4 S5)
[    0.116007] ACPI: Using IOAPIC for interrupt routing
[    0.132008] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.132008] pci 0000:00:00.0: nForce2 C1 Halt Disconnect fixup
[    0.132008] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.132008] pci 0000:00:01.1: PME# disabled
[    0.132008] pci 0000:00:02.0: supports D1
[    0.132008] pci 0000:00:02.0: supports D2
[    0.132008] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.132008] pci 0000:00:02.0: PME# disabled
[    0.132008] pci 0000:00:02.1: supports D1
[    0.132008] pci 0000:00:02.1: supports D2
[    0.132008] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.132008] pci 0000:00:02.1: PME# disabled
[    0.132008] pci 0000:00:02.2: supports D1
[    0.132008] pci 0000:00:02.2: supports D2
[    0.132008] pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.132008] pci 0000:00:02.2: PME# disabled
[    0.132008] pci 0000:00:04.0: supports D1
[    0.132008] pci 0000:00:04.0: supports D2
[    0.132008] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.132008] pci 0000:00:04.0: PME# disabled
[    0.132008] pci 0000:00:06.0: supports D1
[    0.132008] pci 0000:00:06.0: supports D2
[    0.132008] pci 0000:01:09.0: supports D1
[    0.132008] pci 0000:01:09.0: supports D2
[    0.132008] pci 0000:01:09.0: PME# supported from D1 D2 D3hot D3cold
[    0.132008] pci 0000:01:09.0: PME# disabled
[    0.132008] pci 0000:01:0a.0: supports D2
[    0.132008] pci 0000:01:0a.1: supports D1
[    0.132008] pci 0000:01:0a.1: PME# supported from D1 D3hot
[    0.132008] pci 0000:01:0a.1: PME# disabled
[    0.132008] PCI: bridge 0000:00:08.0 io port: [9fff00009000, 8025bffcef51e254]
[    0.132008] PCI: bridge 0000:00:08.0 32bit mmio: [e6ffffffe6000000, 8025bffcef51e254]
[    0.132008] pci 0000:02:00.0: supports D1
[    0.132008] pci 0000:02:00.0: supports D2
[    0.132008] pci 0000:02:00.1: supports D1
[    0.132008] pci 0000:02:00.1: supports D2
[    0.132008] PCI: bridge 0000:00:1e.0 io port: [afff0000a000, 25bffcef51fa54]
[    0.132008] PCI: bridge 0000:00:1e.0 32bit mmio: [e5ffffffe4000000, 25bffcef51fa54]
[    0.132008] PCI: bridge 0000:00:1e.0 32bit mmio pref: [dfffffffc0000000, 25bffcef51fa54]
[    0.132008] bus 00 -> node 0
[    0.132008] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.132008] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[    0.132008] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
[    0.192012] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 *12 14 15)
[    0.192012] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.196012] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.196012] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.196012] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.196012] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 10 11 *12 14 15)
[    0.196012] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.196012] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 11 *12 14 15)
[    0.200012] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.200012] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.200012] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.200012] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.200012] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 11 *12 14 15)
[    0.200012] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.204012] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.204012] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.204012] ACPI: PCI Interrupt Link [APC1] (IRQs *16)
[    0.204012] ACPI: PCI Interrupt Link [APC2] (IRQs *17)
[    0.204012] ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
[    0.204012] ACPI: PCI Interrupt Link [APC4] (IRQs *19)
[    0.204012] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[    0.204012] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0
[    0.204012] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0
[    0.208013] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0
[    0.208013] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
[    0.208013] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0
[    0.208013] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
[    0.208013] ACPI: PCI Interrupt Link [APCS] (IRQs *23)
[    0.208013] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0
[    0.208013] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
[    0.212013] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
[    0.212013] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
[    0.212013] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.212013] pnp: PnP ACPI init
[    0.212013] ACPI: bus type pnp registered
[    0.220013] pnp: PnP ACPI: found 16 devices
[    0.220013] ACPI: ACPI bus type pnp unregistered
[    0.220013] PnPBIOS: Disabled by ACPI PNP
[    0.220013] PCI: Using ACPI for IRQ routing
[    0.220013] ACPI: RTC can wake from S4
[    0.220013] system 00:00: ioport range 0x4000-0x407f has been reserved
[    0.220013] system 00:00: ioport range 0x4080-0x40ff has been reserved
[    0.220013] system 00:00: ioport range 0x4400-0x447f has been reserved
[    0.220013] system 00:00: ioport range 0x4480-0x44ff has been reserved
[    0.220013] system 00:00: ioport range 0x4200-0x427f has been reserved
[    0.220013] system 00:00: ioport range 0x4280-0x42ff has been reserved
[    0.220013] system 00:01: ioport range 0x5000-0x503f has been reserved
[    0.220013] system 00:01: ioport range 0x5500-0x553f has been reserved
[    0.220013] system 00:02: iomem range 0xd1800-0xd3fff has been reserved
[    0.220013] system 00:02: iomem range 0xf0000-0xf7fff could not be reserved
[    0.220013] system 00:02: iomem range 0xf8000-0xfbfff could not be reserved
[    0.220013] system 00:02: iomem range 0xfc000-0xfffff could not be reserved
[    0.220013] system 00:02: iomem range 0x2fff0000-0x2fffffff could not be reserved
[    0.220013] system 00:02: iomem range 0xffff0000-0xffffffff could not be reserved
[    0.220013] system 00:02: iomem range 0x0-0x9ffff could not be reserved
[    0.220013] system 00:02: iomem range 0x100000-0x2ffeffff could not be reserved
[    0.220013] system 00:02: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.220013] system 00:02: iomem range 0xfee00000-0xfee00fff could not be reserved
[    0.220013] system 00:04: ioport range 0x4d0-0x4d1 has been reserved
[    0.252013] pci 0000:00:08.0: PCI bridge, secondary bus 0000:01
[    0.252013] pci 0000:00:08.0:   IO window: 0x9000-0x9fff
[    0.252013] pci 0000:00:08.0:   MEM window: 0xe6000000-0xe6ffffff
[    0.252013] pci 0000:00:08.0:   PREFETCH window: disabled
[    0.252013] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[    0.252013] pci 0000:00:1e.0:   IO window: 0xa000-0xafff
[    0.252013] pci 0000:00:1e.0:   MEM window: 0xe4000000-0xe5ffffff
[    0.252013] pci 0000:00:1e.0:   PREFETCH window: 0x000000c0000000-0x000000dfffffff
[    0.252013] pci 0000:00:08.0: setting latency timer to 64
[    0.252013] bus: 00 index 0 io port: [ffff00000000, ef462200]
[    0.252013] bus: 00 index 1 mmio: [ffffffff00000000, ef462200]
[    0.252013] bus: 01 index 0 io port: [9fff00009000, ef462214ef51e000]
[    0.252013] bus: 01 index 1 mmio: [e6ffffffe6000000, ef462214ef51e000]
[    0.252013] bus: 01 index 2 mmio: [0, ef462214ef51e000]
[    0.252013] bus: 01 index 3 mmio: [0, ef462214ef51e000]
[    0.252013] bus: 02 index 0 io port: [afff0000a000, ef462214ef51f800]
[    0.252013] bus: 02 index 1 mmio: [e5ffffffe4000000, ef462214ef51f800]
[    0.252013] bus: 02 index 2 mmio: [dfffffffc0000000, ef462214ef51f800]
[    0.252013] bus: 02 index 3 mmio: [0, ef462214ef51f800]
[    0.252013] NET: Registered protocol family 2
[    0.252013] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.252013] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.256021] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.256021] TCP: Hash tables configured (established 131072 bind 65536)
[    0.256021] TCP reno registered
[    0.256021] NET: Registered protocol family 1
[    0.256021] checking if image is initramfs... it is
[    0.755345] Switched to high resolution mode on CPU 0
[    0.932007] Freeing initrd memory: 6646k freed
[    0.932007] audit: initializing netlink socket (disabled)
[    0.932007] type=2000 audit(1220279088.928:1): initialized
[    0.932007] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.932007] VFS: Disk quotas dquot_6.5.1
[    0.932007] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.932007] msgmni has been set to 1515
[    0.932007] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[    0.932007] io scheduler noop registered
[    0.932007] io scheduler anticipatory registered
[    0.932007] io scheduler deadline registered
[    0.932007] io scheduler cfq registered (default)
[    0.932007] pci 0000:02:00.0: Boot video device
[    0.936010] isapnp: Scanning for PnP cards...
[    1.288001] isapnp: No Plug & Play device found
[    1.292004] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[    1.292004] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.292004] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    1.296072] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.296072] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    1.296072] brd: module loaded
[    1.296072] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    1.296072] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    1.300012] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.300012] mice: PS/2 mouse device common for all mice
[    1.300012] cpuidle: using governor ladder
[    1.300012] cpuidle: using governor menu
[    1.300012] No iBFT detected.
[    1.300012] TCP cubic registered
[    1.300012] NET: Registered protocol family 17
[    1.300012] Using IPI No-Shortcut mode
[    1.300012] registered taskstats version 1
[    1.300012] Freeing unused kernel memory: 264k freed
[    1.320004] input: AT Translated Set 2 keyboard as /class/input/input0
[    1.444002] processor ACPI0007:00: registered as cooling_device0
[    2.536004] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[    2.536004] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
[    2.536004] forcedeth 0000:00:04.0: PCI INT A -> Link[APCH] -> GSI 22 (level, high) -> IRQ 22
[    2.536004] forcedeth 0000:00:04.0: setting latency timer to 64
[    2.548015] usbcore: registered new interface driver usbfs
[    2.548015] usbcore: registered new interface driver hub
[    2.564008] usbcore: registered new device driver usb
[    2.616015] Uniform Multi-Platform E-IDE driver
[    2.616015] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.668011] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    2.784017] Floppy drive(s): fd0 is 1.44M
[    2.800005] FDC 0 is a post-1991 82077
[    3.056003] forcedeth 0000:00:04.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:0c:6e:f4:ab:70
[    3.056003] forcedeth 0000:00:04.0: timirq lnktim desc-v1
[    3.056003] 8139cp 0000:01:09.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[    3.056003] 8139cp 0000:01:09.0: Try the "8139too" driver instead.
[    3.060015] 8139too Fast Ethernet driver 0.9.28
[    3.060015] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[    3.060015] 8139too 0000:01:09.0: PCI INT A -> Link[APC2] -> GSI 17 (level, high) -> IRQ 17
[    3.060015] eth1: RealTek RTL8139 at 0x9000, 00:40:f4:1f:fd:22, IRQ 17
[    3.060015] eth1:  Identified 8139 chip type 'RTL-8139C'
[    3.060015] amd74xx 0000:00:09.0: UDMA133 controller
[    3.060015] amd74xx 0000:00:09.0: IDE controller (0x10de:0x0065 rev 0xa2)
[    3.064022] amd74xx 0000:00:09.0: BIOS didn't set cable bits correctly. Enabling workaround.
[    3.064022] amd74xx 0000:00:09.0: not 100% native mode: will probe irqs later
[    3.064022]     ide0: BM-DMA at 0xf000-0xf007
[    3.064022]     ide1: BM-DMA at 0xf008-0xf00f
[    3.064022] Probing IDE interface ide0...
[    3.348143] hda: WDC WD1600AAJB-00PVA0, ATA DISK drive
[    4.020225] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[    4.020385] hda: UDMA/100 mode selected
[    4.020670] Probing IDE interface ide1...
[    4.756140] hdc: PIONEER DVD-RW DVR-112D, ATAPI CD/DVD-ROM drive
[    5.092187] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[    5.092500] hdc: host side 80-wire cable detection failed, limiting max speed to UDMA33
[    5.092883] hdc: UDMA/33 mode selected
[    5.093592] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[    5.094420] ide1 at 0x170-0x177,0x376 on irq 15
[    5.096003] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
[    5.096003] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 21 (level, high) -> IRQ 21
[    5.096003] ohci_hcd 0000:00:02.0: setting latency timer to 64
[    5.096003] ohci_hcd 0000:00:02.0: OHCI Host Controller
[    5.096003] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[    5.096003] ohci_hcd 0000:00:02.0: irq 21, io mem 0xe7003000
[    5.152005] usb usb1: configuration #1 chosen from 1 choice
[    5.152005] hub 1-0:1.0: USB hub found
[    5.152005] hub 1-0:1.0: 3 ports detected
[    5.356699] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    5.356948] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.357263] usb usb1: Product: OHCI Host Controller
[    5.357631] usb usb1: Manufacturer: Linux 2.6.27-rc4 ohci_hcd
[    5.358053] usb usb1: SerialNumber: 0000:00:02.0
[    5.360002] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
[    5.360002] ehci_hcd 0000:00:02.2: PCI INT C -> Link[APCL] -> GSI 20 (level, high) -> IRQ 20
[    5.360002] ehci_hcd 0000:00:02.2: setting latency timer to 64
[    5.360002] ehci_hcd 0000:00:02.2: EHCI Host Controller
[    5.360002] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 2
[    5.360002] ehci_hcd 0000:00:02.2: debug port 1
[    5.360002] ehci_hcd 0000:00:02.2: cache line size of 64 is not supported
[    5.360002] ehci_hcd 0000:00:02.2: irq 20, io mem 0xe7005000
[    5.372008] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    5.372008] usb usb2: configuration #1 chosen from 1 choice
[    5.372008] hub 2-0:1.0: USB hub found
[    5.372008] hub 2-0:1.0: 6 ports detected
[    5.576536] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    5.576752] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.577035] usb usb2: Product: EHCI Host Controller
[    5.577370] usb usb2: Manufacturer: Linux 2.6.27-rc4 ehci_hcd
[    5.577759] usb usb2: SerialNumber: 0000:00:02.2
[    5.580001] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 22
[    5.580001] ohci_hcd 0000:00:02.1: PCI INT B -> Link[APCG] -> GSI 22 (level, high) -> IRQ 22
[    5.580001] ohci_hcd 0000:00:02.1: setting latency timer to 64
[    5.580001] ohci_hcd 0000:00:02.1: OHCI Host Controller
[    5.580001] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
[    5.580001] ohci_hcd 0000:00:02.1: irq 22, io mem 0xe7004000
[    5.636001] usb usb3: configuration #1 chosen from 1 choice
[    5.636001] hub 3-0:1.0: USB hub found
[    5.636001] hub 3-0:1.0: 3 ports detected
[    5.840728] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    5.840958] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.841255] usb usb3: Product: OHCI Host Controller
[    5.841603] usb usb3: Manufacturer: Linux 2.6.27-rc4 ohci_hcd
[    5.842006] usb usb3: SerialNumber: 0000:00:02.1
[    5.848013] No dock devices found.
[    5.872011] SCSI subsystem initialized
[    5.912012] libata version 3.00 loaded.
[    6.012003] hda: max request size: 512KiB
[    6.024002] hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63
[    6.024002] hda: cache flushes supported
[    6.024002]  hda: hda1 hda2 hda3 <<6>usb 1-1: new full speed USB device using ohci_hcd and address 2
[    6.056014]  hda5 >
[    6.076011] hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache
[    6.076011] Uniform CD-ROM driver Revision: 3.20
[    6.252002] usb 1-1: configuration #1 chosen from 1 choice
[    6.260011] usb 1-1: New USB device found, idVendor=046d, idProduct=08d9
[    6.260011] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    6.432024] usb 3-2: new low speed USB device using ohci_hcd and address 2
[    6.656005] usb 3-2: configuration #1 chosen from 1 choice
[    6.656005] usb 3-2: New USB device found, idVendor=045e, idProduct=0084
[    6.656005] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    6.656005] usb 3-2: Product: Basic Optical Mouse
[    6.656005] usb 3-2: Manufacturer: Microsoft
[    6.704012] usbcore: registered new interface driver hiddev
[    6.712011] input: Microsoft Basic Optical Mouse as /class/input/input1
[    6.712011] input,hidraw0: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:02.1-2
[    6.712011] usbcore: registered new interface driver usbhid
[    6.712011] usbhid: v2.6:USB HID core driver
[    6.816012] PM: Starting manual resume from disk
[    6.872005] EXT3-fs: mounted filesystem with ordered data mode.
[    6.872005] kjournald starting.  Commit interval 5 seconds
[    8.540004] udevd version 125 started
[   10.372002] Linux agpgart interface v0.103
[   10.420004] agpgart: Detected NVIDIA nForce2 chipset
[   10.440002] agpgart-nvidia 0000:00:00.0: AGP aperture is 64M @ 0xe0000000
[   10.660003] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000
[   10.660003] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x5500
[   10.788002] input: Power Button (FF) as /class/input/input2
[   10.812002] ACPI: Power Button (FF) [PWRF]
[   10.812002] input: Power Button (CM) as /class/input/input3
[   10.844002] ACPI: Power Button (CM) [PWRB]
[   11.808002] Linux video capture interface: v2.00
[   11.868017] gspca: main v2.2.0 registered
[   11.904003] gspca: probing 046d:08d9
[   12.072013] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   12.100012] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   12.448003] input: PC Speaker as /class/input/input4
[   12.912012] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[   12.912012] rtc0: alarms up to one year, y3k
[   13.024001] gameport: FM801 is pci0000:01:0a.1/gameport0, io 0x9800, speed 59659kHz
[   13.592007] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[   13.592007] FM801 0000:01:0a.0: PCI INT A -> Link[APC1] -> GSI 16 (level, high) -> IRQ 16
[   13.784015] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21
[   13.784015] Intel ICH 0000:00:06.0: PCI INT A -> Link[APCJ] -> GSI 21 (level, high) -> IRQ 21
[   13.784015] Intel ICH 0000:00:06.0: setting latency timer to 64
[   13.792012] zc3xx: probe 2wr ov vga 0x0000
[   13.864015] zc3xx: probe sensor -> 11
[   13.864015] zc3xx: Find Sensor HV7131R(c)
[   13.880015] gspca: probe ok
[   13.880015] gspca: probing 046d:08d9
[   13.880015] gspca: probing 046d:08d9
[   13.880015] usbcore: registered new interface driver zc3xx
[   13.880015] zc3xx: registered
[   14.108002] intel8x0_measure_ac97_clock: measured 52226 usecs
[   14.108002] intel8x0: clocking to 47448
[   14.240014] usbcore: registered new interface driver snd-usb-audio
[   15.660011] Adding 963860k swap on /dev/hda5.  Priority:-1 extents:1 across:963860k
[   16.064016] EXT3 FS on hda2, internal journal
[   16.776004] loop: module loaded
[   17.552008] fuse init (API version 7.9)
[   24.436010] NET: Registered protocol family 10
[   24.436010] lo: Disabled Privacy Extensions
[   24.644010] parport_pc 00:0c: reported by Plug and Play ACPI
[   24.644010] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[   24.744003] lp0: using parport0 (interrupt-driven).
[   24.780004] ppdev: user-space parallel port driver
[   33.460011] [drm] Initialized drm 1.1.0 20060810
[   33.472014] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[   33.472014] pci 0000:02:00.0: PCI INT A -> Link[APC4] -> GSI 19 (level, high) -> IRQ 19
[   33.472014] [drm] Initialized radeon 1.29.0 20080528 on minor 0
[   34.687505] eth0: no IPv6 routers present
[   35.080002] agpgart-nvidia 0000:00:00.0: AGP 3.0 bridge
[   35.080002] agpgart-nvidia 0000:00:00.0: putting AGP V3 device into 8x mode
[   35.080002] pci 0000:02:00.0: putting AGP V3 device into 8x mode
[   35.352009] [drm] Setting GART location based on new memory map
[   35.352009] [drm] Loading R300 Microcode
[   35.352009] [drm] Num pipes: 1
[   35.352009] [drm] writeback test succeeded in 1 usecs
[  250.496005] zc3xx: probe 2wr ov vga 0x0000
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Spca50x-devs mailing list
Spca50x-devs@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/spca50x-devs