Re: [Spca50x-devs] 046d:08d9 - works with gspca-modules but not 2.6.27-rc3
- Date: Mon, 01 Sep 2008 13:02:42 +0930
- From: Arthur Marsh <arthur.marsh@xxxxxxxxxxxxxxxx>
- Subject: Re: [Spca50x-devs] 046d:08d9 - works with gspca-modules but not 2.6.27-rc3
Jean-Francois Moine wrote, on 30/08/08 15:42:
> First, you must have a running kernel. Say 2.6.27-rc4 (but it may any
> kernel from 2.6.18).
> Assuming you have the kernel sources and you have compiled and installed
> it, you should have:
> - in '/usr/src/linux-2.6.27-rc4/', a file '.config' (which should be the
> same as '/boot/config').
> - in '/lib/modules/`uname -r`/', a link 'build' which points to
> You have cloned my mercurial tree in '/usr/src/gspca'. Do:
> cd /usr/src/gspca
> cp /usr/src/linux-2.6.27-rc4/.config v4l/
> make menuconfig
> (or 'make gconfig'...)
> In menuconfig, add the GSPCA driver if it is not set.
> Then do:
> sudo make install
> This last command will overwrite all the V4L modules
> of /lib/modules/`uname -r`/kernel/drivers/media/).
> This is normal.
> If your webcam was connected, unplug it and, as root, do:
> rmmod gspca_zc3xx
> rmmod gspca_main
> Then plug the webcam. There should be no error looking at:
> dmesg | tail
> Best regards.
I recompiled the driver on the machine actually running the webcam were
the kernel source was also compiled, and obtained:
[ 951.696017] Linux video capture interface: v2.00
[ 951.704010] gspca: main v2.2.0 registered
[ 991.684013] gspca: probing 046d:08d9
[ 993.556003] zc3xx: probe 2wr ov vga 0x0000
[ 993.628004] zc3xx: probe sensor -> 11
[ 993.628004] zc3xx: Find Sensor HV7131R(c)
[ 993.628004] gspca: probe ok
[ 993.628004] usbcore: registered new interface driver zc3xx
[ 993.628004] zc3xx: registered
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
Spca50x-devs mailing list