Web lists-archives.com

Re: [Spca50x-devs] PATCH: gspca-mercurial SN9C103 fixes




Andoni Zubimendi wrote:
> Hi!
> 
> With this patch my webcam works better. It works fine in 320x240.The
> brightness and contrast can't be adjusted yet.
> 

I have good reason to believe that the ov7630, is the same as an ov7620, I 
believe this as the ov6620 and ov 6630 are the same, the only difference is the 
supply voltage, so I guess the same holds true for the ov7630.

In that case, there is a datasheet which documents all the ov7630 registers 
(those you set with the i2c data) here:
http://mxhaard.free.fr/spca50x/Doc/Omnivision/

> I've been working to make it work in 640x480, but I don't have a working
> patch yet. To make it work in different resolutions I need to change some
> bytes in ov7630_sensor_init_3,

Yes, I believe you need to atleast clear bit 5 off register 14, so thats an i2c 
write sequence of:
  {0xa0, 0x21, 0x14, 0x04, 0x00, 0x00, 0x00, 0x10}

But I notice that register 14 currently does not get written at all and its 
rest value is 0x04, hmm.

Regards,

Hans

-------------------------------------------------------------------------
Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW!
Studies have shown that voting for your favorite open source project,
along with a healthy diet, reduces your potential for chronic lameness
and boredom. Vote Now at http://www.sourceforge.net/community/cca08
_______________________________________________
Spca50x-devs mailing list
Spca50x-devs@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/spca50x-devs