Web lists-archives.com

[Spca50x-devs] Embedded autobrightness with Vimicro ZC3XX



I’m tring to use a Vimicro ZC3XX based cam on an Asus wl500gp running OpenWrt.


V4L is V4L2, driver is gspcav1-20070508.


Camera is working inside ok, but outside not (overbrighted). I’m using spcacat for grabbing. Is there any other way to get a proper picture? Should I compile spcaview to set autobrightness? Or is it possible to modify spcacat for autobrighting (that’s what I was tring to do)?


I saw in the source files, that „Wrong device” means that it’s not an SPCA ioctl device. What does that mean? Should I use GSPCA2 for autobright?


the dmesg output:

linux-2.6-brcm47xx/gspcav1-20070508/gspca_core.c: USB GSPCA camera found.(ZC3XX)

build_mipsel/linux-2.6-brcm47xx/gspcav1-20070508/gspca_core.c: [spca5xx_probe:4098] Camera type JPEG

build_mipsel/linux-2.6-brcm47xx/gspcav1-20070508/Vimicro/zc3xx.h: [zc3xx_config:515] Sensor ID:11

build_mipsel/linux-2.6-brcm47xx/gspcav1-20070508/Vimicro/zc3xx.h: [zc3xx_config:566] Find Sensor PB0330

build_mipsel/linux-2.6-brcm47xx/gspcav1-20070508/gspca_core.c: [spca5xx_getcapability:1215] maxw 640 maxh 480 minw 176 minh 144

usbcore: registered new interface driver gspca

build_mipsel/linux-2.6-brcm47xx/gspcav1-20070508/gspca_core.c: gspca driver 01.00.18 registered

usbcore: registered new interface driver spca5xx

build_mipsel/linux-2.6-brcm47xx/spca5xx-le/spca_core.c: spca5xx driver 00.57.06LE registered





This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
Spca50x-devs mailing list