Web lists-archives.com

[Spca50x-devs] Fwd: ID 0ac8:301b Z-Star Microelectronics Corp. ZC0301 WebCam






---------- Forwarded message ----------
From: Nazareno <yochule@xxxxxxxxx>
Date: 02-ene-2008 13:33
Subject: Re: [Spca50x-devs] ID 0ac8:301b Z-Star Microelectronics Corp. ZC0301 WebCam
To: "Serge A. Suchkov" <Serge.A.S@xxxxxxxxx>

hello again. i just uninstall your MGSPCA driver - i goes to the folder of your driver and (as root) did a "sudo make uninstall",
in the etc/modprobe.d/blaklisted i add a blacklist ehci_hcd line in the end of file...reboot the system and start spcaview.
but it no works...

chuleymar@losotro:~$ cd imagenes_y_cosas/camara/spcaview-20061208/
chuleymar@losotro:~/imagenes_y_cosas/camara/spcaview-20061208$ spcaview

 Spcaview version: 1.1.7 date: 06:11:2006 (C) mxhaard@xxxxxxxx
Initializing SDL.
SDL initialized.
bpp 3 format 15
Using video device /dev/video0.
Initializing v4l.
**************** PROBING CAMERA *********************
Camera found: Z-star Vimicro zc0301p
Bridge found: ZC301-2
Bridge find ZC301-2 number 13
StreamId: JPEG Camera
quality 1 autoexpo 1 Timeframe 0 lightfreq 50
Bridge find ZC301-2 number 13
Available Resolutions width 640  heigth 480 native 
Available Resolutions width 352  heigth 288 decoded 
Available Resolutions width 320  heigth 240 native *
Available Resolutions width 176  heigth 144 decoded 
unable to probe size !!
*****************************************************
 grabbing method default MMAP asked
VIDIOCGMBUF size 2457632  frames 2  offets[0]=0 offsets[1]=1228816
VIDIOCGPICT
brightnes=32768 hue=0 color=0 contrast=32768 whiteness=0
depth=12 palette=4
VIDIOCSPICT
brightness=32768 hue=0 color=0 contrast=32768 whiteness=0
depth=24 palette=15


this is the new dmesg:

chuleymar@losotro:~/imagenes_y_cosas/camara/spcaview-20061208$ dmesg

[    0.000000] Linux version 2.6.22-14-generic (buildd@king) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Dec 18 05:28:27 UTC 2007 (Ubuntu 2.6.22-14.47-generic)
[    0.000000] Command line: root=UUID=1db96a87-8e36-4fcc-8b69-da4c09e08c5e ro quiet splash locale=es_ES
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000002ffb0000 (usable)
[    0.000000]  BIOS-e820: 000000002ffb0000 - 000000002ffc0000 (ACPI data)
[    0.000000]  BIOS-e820: 000000002ffc0000 - 000000002fff0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000002fff0000 - 0000000030000000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[    0.000000] Entering add_active_range(0, 256, 196528) 1 entries of 3200 used
[    0.000000] end_pfn_map = 1048576
[    0.000000] DMI 2.3 present.
[    0.000000] ACPI: RSDP signature @ 0xFFFF8100000FAB00 checksum 0
[    0.000000] ACPI: RSDP 000FAB00, 0014 (r0 ACPIAM)
[    0.000000] ACPI: RSDT 2FFB0000, 0030 (r1 A M I  OEMRSDT   2000616 MSFT       97)
[    0.000000] ACPI: FACP 2FFB0200, 0081 (r1 A M I  OEMFACP   2000616 MSFT       97)
[    0.000000] ACPI: DSDT 2FFB03E0, 3641 (r1  A0232 A0232008        8 MSFT  100000D)
[    0.000000] ACPI: FACS 2FFC0000, 0040
[    0.000000] ACPI: APIC 2FFB0390, 004A (r1 A M I  OEMAPIC   2000616 MSFT       97)
[    0.000000] ACPI: OEMB 2FFC0040, 003F (r1 A M I  OEMBIOS   2000616 MSFT       97)
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000002ffb0000
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[    0.000000] Entering add_active_range(0, 256, 196528) 1 entries of 3200 used
[    0.000000] Bootmem setup node 0 0000000000000000-000000002ffb0000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   DMA32        4096 ->  1048576
[    0.000000]   Normal    1048576 ->  1048576
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0:        0 ->      159
[    0.000000]     0:      256 ->   196528
[    0.000000] On node 0 totalpages: 196431
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 1124 pages reserved
[    0.000000]   DMA zone: 2819 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 2630 pages used for memmap
[    0.000000]   DMA32 zone: 189802 pages, LIFO batch:31
[    0.000000]   Normal zone: 0 pages used for memmap
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] Processor #0 (Bootup-CPU)
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000 ] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Setting APIC routing to flat
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e4000
[    0.000000] swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 30000000:cf780000)
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] PERCPU: Allocating 34696 bytes of per cpu data
[    0.000000 ] Built 1 zonelists.  Total pages: 192621
[    0.000000] Kernel command line: root=UUID=1db96a87-8e36-4fcc-8b69-da4c09e08c5e ro quiet splash locale=es_ES
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[   34.767282] time.c: Detected 1400.074 MHz processor.
[   34.768674] Console: colour VGA+ 80x25
[   34.768698] Checking aperture...
[   34.768703] CPU 0: aperture @ dc000000 size 32 MB
[   34.768705] Aperture too small (32 MB)
[   34.768712] AGP bridge at 00:00:00
[   34.768718] Aperture from AGP @ dc000000 size 64 MB (APSIZE f30)
[   34.785045] Memory: 763140k/786112k available (2274k kernel code, 22584k reserved, 1181k data, 296k init)
[   34.785122] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[   34.861235] Calibrating delay using timer specific routine.. 2803.63 BogoMIPS (lpj=5607271)
[   34.861286] Security Framework v1.0.0 initialized
[   34.861299] SELinux:  Disabled at boot.
[   34.861430] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[   34.862794] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[   34.863500] Mount-cache hash table entries: 256
[   34.863732] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   34.863735] CPU: L2 Cache: 256K (64 bytes/line)
[   34.863740] CPU 0/0 -> Node 0
[   34.863771] SMP alternatives: switching to UP code
[   34.864086] Freeing SMP alternatives: 24k freed
[   34.864539] Early unpacking initramfs... done
[   35.285102] ACPI: Core revision 20070126
[   35.285176 ] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   35.328396] Using local APIC timer interrupts.
[   35.399787] result 12500657
[   35.399789] Detected 12.500 MHz APIC timer.
[   35.401026 ] Brought up 1 CPUs
[   35.401484] NET: Registered protocol family 16
[   35.401620] ACPI: bus type pci registered
[   35.401629] PCI: Using configuration type 1
[   35.404089] ACPI: EC: Look up EC in DSDT
[   35.407738] ACPI: Interpreter enabled
[   35.407743] ACPI: (supports S0 S1 S3 S4 S5)
[   35.407765] ACPI: Using IOAPIC for interrupt routing
[   35.416128] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   35.416142 ] PCI: Probing PCI hardware (bus 00)
[   35.416806] PCI: enabled onboard AC97/MC97 devices
[   35.417217] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   35.426668] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
[   35.426793] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15)
[   35.426908] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15)
[   35.427023] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[   35.427139] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[   35.427255] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[   35.427371] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[   35.427488] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[   35.427608] Linux Plug and Play Support v0.97 (c) Adam Belay
[   35.427624] pnp: PnP ACPI init
[   35.427647] ACPI: bus type pnp registered
[   35.431591] pnp: PnP ACPI: found 14 devices
[   35.431597] ACPI: ACPI bus type pnp unregistered
[   35.431681] PCI: Using ACPI for IRQ routing
[   35.431685] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   35.431812] NET: Registered protocol family 8
[   35.431815] NET: Registered protocol family 20
[   35.431908] agpgart: Detected AGP bridge 0
[   35.434688] agpgart: AGP aperture is 64M @ 0xdc000000
[   35.434804] pnp: 00:09: ioport range 0x290-0x297 has been reserved
[   35.434819] pnp: 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
[   35.434823] pnp: 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved
[   35.434828] pnp: 00:0b: iomem range 0xfff80000-0xffffffff could not be reserved
[   35.434837] pnp: 00:0d: iomem range 0x0-0x9ffff could not be reserved
[   35.434840] pnp: 00:0d: iomem range 0xc0000-0xdffff has been reserved
[   35.434845] pnp: 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[   35.434849] pnp: 00:0d: iomem range 0x100000-0x2ffeffff could not be reserved
[   35.435210] PCI: Bridge: 0000:00:01.0
[   35.435212 ]   IO window: disabled.
[   35.435218]   MEM window: faf00000-fbffffff
[   35.435222]   PREFETCH window: e0000000-f9ffffff
[   35.435244] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   35.435300 ] NET: Registered protocol family 2
[   35.436947] Time: tsc clocksource has been installed.
[   35.473042] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[   35.473681] TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
[   35.478395] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[   35.479939] TCP: Hash tables configured (established 131072 bind 65536)
[   35.479945] TCP reno registered
[   35.489125] checking if image is initramfs... it is
[   36.299209] Freeing initrd memory: 7204k freed
[   36.311330] audit: initializing netlink socket (disabled)
[   36.311350] audit(1199283223.476:1): initialized
[   36.314117] VFS: Disk quotas dquot_6.5.1
[   36.314197] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[   36.314347] io scheduler noop registered
[   36.314350] io scheduler anticipatory registered
[   36.314352] io scheduler deadline registered
[   36.314492] io scheduler cfq registered (default)
[   36.314512] PCI: VIA PCI bridge detected. Disabling DAC.
[   36.314883] Boot video device is 0000:01:00.0
[   36.357416] Real Time Clock Driver v1.12ac
[   36.357530] Linux agpgart interface v0.102 (c) Dave Jones
[   36.357534] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   36.357643] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   36.358964] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   36.359952] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   36.360297] input: Macintosh mouse button emulation as /class/input/input0
[   36.360405] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[   36.360917] serio: i8042 KBD port at 0x60,0x64 irq 1
[   36.360923] serio: i8042 AUX port at 0x60,0x64 irq 12
[   36.361135 ] mice: PS/2 mouse device common for all mice
[   36.361444] TCP cubic registered
[   36.361560] NET: Registered protocol family 1
[   36.361872] /build/buildd/linux-source-2.6.22-2.6.22/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[   36.361882] Freeing unused kernel memory: 296k freed
[   36.396560] input: AT Translated Set 2 keyboard as /class/input/input1
[   37.642627] AppArmor: AppArmor initialized<5>audit(1199283224.808:2):  type=1505 info="AppArmor initialized" pid=1202
[   37.652857] fuse init (API version 7.8)
[   37.659467] Failure registering capabilities with primary security module.
[   38.633418] SCSI subsystem initialized
[   38.640643] libata version 2.21 loaded.
[   38.642581] sata_via 0000:00:0f.0: version 2.2
[   38.642611] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 20
[   38.642675] sata_via 0000:00:0f.0: routed to hard irq line 10
[   38.642822 ] scsi0 : sata_via
[   38.642886] scsi1 : sata_via
[   38.642916] ata1: SATA max UDMA/133 cmd 0x000000000001e800 ctl 0x000000000001e402 bmdma 0x000000000001d400 irq 20
[   38.642921] ata2: SATA max UDMA/133 cmd 0x000000000001e000 ctl 0x000000000001d802 bmdma 0x000000000001d408 irq 20
[   38.701666] usbcore: registered new interface driver usbfs
[   38.701700] usbcore: registered new interface driver hub
[   38.701733] usbcore: registered new device driver usb
[   38.702950] USB Universal Host Controller Interface driver v3.0
[   38.781425] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[   38.847133] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   38.894350] Floppy drive(s): fd0 is 1.44M
[   38.981842 ] FDC 0 is a post-1991 82077
[   39.035380] ata1.00: ATA-7: HDS728080PLA380, PF2OA60A, max UDMA/133
[   39.035388] ata1.00: 160836480 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   39.055312] ata1.00: configured for UDMA/133
[   39.262881] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[   39.273846] scsi 0:0:0:0: Direct-Access     ATA      HDS728080PLA380  PF2O PQ: 0 ANSI: 5
[   39.281176] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   39.281185] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   39.282183] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
[   39.282209] ACPI: PCI Interrupt 0000:00:0f.1 [A] -> GSI 20 (level, low) -> IRQ 20
[   39.282225] VP_IDE: chipset revision 6
[   39.282228] VP_IDE: not 100% native mode: will probe irqs later
[   39.282241] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00: 0f.1
[   39.282251]     ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:pio, hdb:pio
[   39.282266]     ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
[   39.282276] Probing IDE interface ide0...
[   39.302454] sd 0:0:0:0: [sda] 160836480 512-byte hardware sectors (82348 MB)
[   39.302474] sd 0:0:0:0: [sda] Write Protect is off
[   39.302477] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   39.302494] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   39.302599] sd 0:0:0:0: [sda] 160836480 512-byte hardware sectors (82348 MB)
[   39.302609] sd 0:0:0:0: [sda] Write Protect is off
[   39.302612] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   39.302628] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   39.302634]  sda: sda1 sda2 < sda5 sda6 sda7 > sda3 sda4
[   39.382078] sd 0:0:0:0: [sda] Attached SCSI disk
[   39.387626] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   39.756618] Attempting manual resume
[   39.756623] swsusp: Resume From Partition 8:7
[   39.756626] PM: Checking swsusp image.
[   39.756838] PM: Resume from disk failed.
[   39.794147] kjournald starting.  Commit interval 5 seconds
[   39.794163 ] EXT3-fs: mounted filesystem with ordered data mode.
[   39.854563] Probing IDE interface ide1...
[   40.722301] hdc: TSSTcorp CDW/DVD SH-M522C, ATAPI CD/DVD-ROM drive
[   41.398040] ide1 at 0x170-0x177,0x376 on irq 15
[   41.414779] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21
[   41.414797] uhci_hcd 0000:00:10.0: UHCI Host Controller
[   41.415389] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[   41.415428] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000b800
[   41.415604] usb usb1: configuration #1 chosen from 1 choice
[   41.415637] hub 1-0:1.0: USB hub found
[   41.415647] hub 1-0:1.0: 2 ports detected
[   41.521828] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 21
[   41.521845] uhci_hcd 0000:00:10.1: UHCI Host Controller
[   41.521875] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[   41.521902] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000c000
[   41.522046] usb usb2: configuration #1 chosen from 1 choice
[   41.522079] hub 2-0:1.0: USB hub found
[   41.522088] hub 2-0:1.0: 2 ports detected
[   41.629727] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 21
[   41.629744] uhci_hcd 0000:00:10.2: UHCI Host Controller
[   41.629772] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[   41.629798] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000c400
[   41.629936] usb usb3: configuration #1 chosen from 1 choice
[   41.629976] hub 3-0:1.0: USB hub found
[   41.629987] hub 3-0:1.0: 2 ports detected
[   41.737700] ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 21
[   41.737719] uhci_hcd 0000:00:10.3: UHCI Host Controller
[   41.737751] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[   41.737777] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000c800
[   41.737927] usb usb4: configuration #1 chosen from 1 choice
[   41.737963] hub 4-0:1.0: USB hub found
[   41.737973] hub 4-0:1.0: 2 ports detected
[   41.761524] usb 1-1: new full speed USB device using uhci_hcd and address 2
[   41.845932] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21
[   41.846058] ehci_hcd 0000:00:10.4: EHCI Host Controller
[   41.846137] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[   41.846195] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfad00000
[   41.881496] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00 , driver 10 Dec 2004
[   41.881666] usb usb5: configuration #1 chosen from 1 choice
[   41.881702] hub 5-0:1.0: USB hub found
[   41.881716] hub 5-0:1.0: 8 ports detected
[   41.985916] ACPI: PCI Interrupt 0000:00: 12.0[A] -> GSI 23 (level, low) -> IRQ 23
[   41.986058] eth0: VIA Rhine II at 0x1b000, 00:15:f2:ce:c3:3a, IRQ 23.
[   41.986776] eth0: MII PHY found at address 1, status 0x7849 advertising 01e1 Link 0000.
[   42.297228] usb 1-1: device not accepting address 2, error -71
[   43.968336] usb 1-1: new full speed USB device using uhci_hcd and address 4
[   44.165666] usb 1-1: configuration #1 chosen from 1 choice
[   44.412122 ] usb 2-2: new full speed USB device using uhci_hcd and address 2
[   44.618190] usb 2-2: configuration #1 chosen from 1 choice
[   48.588185] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   48.715324] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   49.612194] hdc: ATAPI 52X DVD-ROM CD-R/RW drive, 1536kB Cache, UDMA(33)
[   49.612208] Uniform CD-ROM driver Revision: 3.20
[   49.740631] nvidia: module license 'NVIDIA' taints kernel.
[   50.127887 ] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   50.128240] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  100.14.19  Wed Sep 12 14:08:38 PDT 2007
[   50.288186] input: PC Speaker as /class/input/input2
[   50.318031] usb 2-2: reset full speed USB device using uhci_hcd and address 2
[   50.346549] Linux video capture interface: v2.00
[   50.433656] PCI: Enabling device 0000:00:11.6 (0000 -> 0001)
[   50.433670 ] ACPI: PCI Interrupt 0000:00:11.6[C] -> GSI 22 (level, low) -> IRQ 22
[   50.451029] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: USB SPCA5XX camera found.(ZC3XX)
[   50.496074] usbcore: registered new interface driver speedtch
[   50.925402] speedtch 2-2:1.0: found stage 1 firmware speedtch-1.bin.4
[   51.036713] input: ImPS/2 Generic Wheel Mouse as /class/input/input3
[   51.039611] parport_pc 00:08: reported by Plug and Play ACPI
[   51.039728] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[   51.164705] speedtch 2-2:1.0: found stage 2 firmware speedtch-2.bin.4
[   51.192394] PCI: Setting latency timer of device 0000:00:11.6 to 64
[   51.201837] usbcore: registered new interface driver gspca
[   51.201844] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22 /debian/build/build-generic/media/gspcav1/gspca_core.c: gspca driver 01.00.12 registered
[   51.696367] ACPI: PCI interrupt for device 0000:00:11.6 disabled
[   51.696386] VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13
[   51.696623] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 22
[   51.696766] PCI: Setting latency timer of device 0000:00:11.5 to 64
[   52.211863] codec_read: codec 0 is not valid [0xfe0000]
[   52.218975] codec_read: codec 0 is not valid [0xfe0000]
[   52.226685] codec_read: codec 0 is not valid [0xfe0000]
[   52.234084] codec_read: codec 0 is not valid [0xfe0000]
[   53.420793] lp0: using parport0 (interrupt-driven).
[   53.510268] Adding 433712k swap on /dev/sda7.  Priority:-1 extents:1 across:433712k
[   53.969043] EXT3 FS on sda3, internal journal
[   55.671154] ATM dev 0: ADSL line is synchronising
[   75.660868] ATM dev 0: ADSL line is up (608 kb/s down | 128 kb/s up)
[   88.396567] kjournald starting.  Commit interval 5 seconds
[   88.396713] EXT3 FS on sda4, internal journal
[   88.396719] EXT3-fs: mounted filesystem with ordered data mode.
[   89.561679] No dock devices found.
[   89.720484] input: Power Button (FF) as /class/input/input4
[   89.727079] ACPI: Power Button (FF) [PWRF]
[   89.760394] input: Power Button (CM) as /class/input/input5
[   89.766964] ACPI: Power Button (CM) [PWRB]
[   89.800439] input: Sleep Button (CM) as /class/input/input6
[   89.806977] ACPI: Sleep Button (CM) [SLPB]
[   90.074633] powernow-k8: Power state transitions not supported
[   91.621293] eth0: link down
[   91.745325] ppdev: user-space parallel port driver
[   91.886262] audit(1199294079.631:3):  type=1503 operation="inode_permission" requested_mask="r" denied_mask="r" name="/etc/ppp/resolv.conf" pid=4667 profile=""
[   91.886876] audit(1199294079.631:4):  type=1503 operation="inode_permission" requested_mask="r" denied_mask="r" name="/etc/ppp/resolv.conf" pid=4667 profile=""
[   92.016676] audit(1199294079.759:5):  type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4667 profile=""> [   93.496588] Failure registering capabilities with primary security module.
[   93.890603] Bluetooth: Core ver 2.11
[   93.890755] NET: Registered protocol family 31
[   93.890758] Bluetooth: HCI device and connection manager initialized
[   93.890763] Bluetooth: HCI socket layer initialized
[   93.912908] Bluetooth: L2CAP ver 2.8
[   93.912915] Bluetooth: L2CAP socket layer initialized
[   94.019344] Bluetooth: RFCOMM socket layer initialized
[   94.019463] Bluetooth: RFCOMM TTY layer initialized
[   94.019467] Bluetooth: RFCOMM ver 1.8
[   95.418393] PPP generic driver version 2.4.2
[   96.108554] agpgart: Found an AGP 3.0 compliant device at 0000:00: 00.0.
[   96.108572] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[   96.108635] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[  108.994470] NET: Registered protocol family 17
[  109.047648] NET: Registered protocol family 10
[  109.047878] lo: Disabled Privacy Extensions
[  109.048056] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  119.783408] nas0: no IPv6 routers present
[  231.309742 ] NET: Registered protocol family 24
[  232.139714] br2684_create: register_netdev failed
chuleymar@losotro:~/imagenes_y_cosas/camara/spcaview-20061208$

Used 131914ms for 1641 images => 80ms/image 12fps.
Quiting SDL.
Decoded frames:1641 Average decode time: 2.000000
unmapping
closing
closed
Destroy Picture thread ...
Quiting....
chuleymar@losotro:~/imagenes_y_cosas/camara/spcaview-20061208$

whow to do a USB traffic snoop?
regards
chule
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Spca50x-devs mailing list
Spca50x-devs@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/spca50x-devs