Web lists-archives.com

Re: [Spca50x-devs] webcam recognized by driver but freeze the apps




Le jeudi 5 avril 2007 05:58, vous avez écrit :
> Hello Emmanuel,
>
>   It is strange, because I did manage to run spcaview and the camera does
> work.  My problem so far only occured with Kopete, but I did not try to run
> it on many programs yet so it is hard to tell to what extent the problem
> is.
>
>   For your problem, I think perhaps that there is a Kernel mismatch issue
> that while the device-driver modules loads into the kernel, it cannot use
> it properlly.
>
>   Try doing tail -f /var/log/syslog in a console while starting the program
> and see if anything comes up.

Here is the answer of var/log/messages while starting spcaview

What hint could you get?

Thanks for any help

>   Later,
>   Buck
>
> emmanuel simonnet <manusim1@xxxxxxx> wrote:
>   Hello,
> At least i'm not alone.Though,my pb seems a little bit different.My cam
> doesn't freeze the system but only the program running it,and whatever
> program it is.I tried kopete,camorama,camstream,ekiga,spcaview with still
> the same pb: the camera red light ignites and the program freezes.
>
> Does your camera works with other program?
>
> Le mercredi 4 avril 2007 17:05, vous avez écrit :
> > Hello Emmanuel!
> >
> > I am using Logitech Traveler Quickcam and whenever I try to configure it
> > in Kopete, a KDE utlity, the entire system freezes. This happens both
> > under root and user logins.
> >
> > I still have not found a solution.
> >
> > Buck
> >
> > emmanuel simonnet wrote:
> > Hi
> >
> > Anyone knows what the pb could be?
> > I don't know what to try.
> >
> > Thanks
> >
> > Le samedi 31 mars 2007 08:40, emmanuel simonnet a écrit :
> > > Hi
> > >
> > > I have a no-brand webcam id 04fc:0561 recognized as a Sunplus Flexcam
> > > 100.As this type of cam is in the list of cams supported by the
> > > driver,i installed gspca on my system (Mandriva 2007.0 kernel
> > > 2.6.17-5). The cam is recognized by the driver (spca561) but every app
> > > i tried freeze.
> > >
> > > The output of spcaview looks like it takes only 2 frames and wait.
> > >
> > > I join the output of var/log/messages with debug=4.
> > >
> > > Any help to solve this pb would be appreciated.If you need any other
> > > info or test,just ask
> > >
> > > Thanks
> > > Emmanuel
> >
> > -------------------------------------------------------------------------
> > Take Surveys. Earn Cash. Influence the Future of IT
> > Join SourceForge.net's Techsay panel and you'll get the chance to share
> > your opinions on IT & business topics through brief surveys-and earn cash
> > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> > _______________________________________________
> > Spca50x-devs mailing list
> > Spca50x-devs@xxxxxxxxxxxxxxxxxxxxx
> > https://lists.sourceforge.net/lists/listinfo/spca50x-devs
> >
> >
> >
> > ---------------------------------
> > Finding fabulous fares is fun.
> > Let Yahoo! FareChase search your favorite travel sites to find flight and
> > hotel bargains.
>
> ---------------------------------
> Looking for earth-friendly autos?
>  Browse Top Cars by "Green Rating" at Yahoo! Autos' Green Center.


-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Spca50x-devs mailing list
Spca50x-devs@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/spca50x-devs