Web lists-archives.com

Re: [Samba] samba_dns_question




Hai Rowland, 

I think you are mixing a few settings. 

http://www.zytrax.com/books/dns/ch7/queries.html#additional-from-auth
 additional-from-auth yes | no ;
 additional-from-cache yes | no ; 

And

www.zytrax.com/books/dns/ch7/queries.html#auth-nxdomain
auth-nxdomain yes | no;

If auth-nxdomain is 'yes' allows the server to answer authoritatively (the
AA bit is set) 
	when returning NXDOMAIN (domain does not exist) answers, 
if 'no' (the default) the server will not answer authoritatively. 

And

http://www.zytrax.com/books/dns/ch7/queries.html#empty-zones-enable
empty-zones-enable yes | no ;

By default empty-zones-enable is set to yes which means that reverse queries
for IPv4 and IPv6 addresses 
covered by RFCs 1918, 4193, 5737 and 6598 (as well as IPv6 local address
(locally assigned), 
IPv6 link local addresses, the IPv6 loopback address and the IPv6 unknown
address) 
but which is not not covered by a locally defined zone clause will
automatically return an NXDOMAIN response from the local name server. 
This prevents reverse map queries to such addresses escaping to the DNS
hierarchy where 
they are simply noise and increase the already high level of query pollution
caused by mis-configuration.

auth-nxdomain yes;
empty-zones-enable no; 
additional-from-auth yes ;
additional-from-cache no ; 
Would be my settings, if i did read above correctly. ( for the DC's ) 
If i forward this to my other 2 bind servers, then they would have. 

auth-nxdomain no;
empty-zones-enable yes;
additional-from-auth yes ;
additional-from-cache yes ; 

If the zone you are using in samba and is in the same as the empty-zones.
And an empty zone contains only an SOA and a single NS RR.
What will happen... 

But i'll read this again in dutch.. Maybe reading things wrong, dont think
so but possible. 


Greetz, 

Louis



> -----Oorspronkelijk bericht-----
> Van: samba [mailto:samba-bounces@xxxxxxxxxxxxxxx] Namens 
> Rowland Penny via samba
> Verzonden: dinsdag 22 januari 2019 15:24
> Aan: samba@xxxxxxxxxxxxxxx
> Onderwerp: Re: [Samba] samba_dns_question
> 
> On Tue, 22 Jan 2019 14:27:12 +0100
> "L.P.H. van Belle via samba" <samba@xxxxxxxxxxxxxxx> wrote:
> 
> > Hai, 
> > 
> > > -----Oorspronkelijk bericht-----
> > > Van: samba [mailto:samba-bounces@xxxxxxxxxxxxxxx] Namens 
> > > Rowland Penny via samba
> > > Verzonden: dinsdag 22 januari 2019 14:12
> > > Aan: samba@xxxxxxxxxxxxxxx
> > > Onderwerp: Re: [Samba] samba_dns_question
> > > 
> > > On Tue, 22 Jan 2019 13:54:00 +0100
> > > "L.P.H. van Belle via samba" <samba@xxxxxxxxxxxxxxx> wrote:
> > > 
> > > > I really suggest that you change this. 
> > > > 
> > > > Disable : 
> > > > > include "/etc/bind/named.conf.default-zones";
> > > 
> > > I have this and have never had the OP's problem
> > > 
> > > > And this supports it : 
> > > > >      empty-zones-enable no; 
> > > 
> > > Again, I have this.
> > 
> > Then you are using a zone that is not in the default zone.
> > The problem occurs only when you bind-DLZ is trying to load a zone
> > defined in the default. Same for the empty-zones-enable 
> > 
> > > 
> > > > 
> > > > These to my cause your problem. 
> > > > Might load zones that bind9_DLZ is trying to load also. 
> > > > 
> > > > Set to yes:
> > > > >      auth-nxdomain no;    # conform to RFC1035
> > > > The AD is the AUTHORITIVE Server.  
> > > > For that  you need : auth-nxdomain yes;
> > > 
> > > Sorry, but no you don't, well I don't
> > > 
> 
> I seemed to remember there was a reason why I didn't have
> 'auth-nxdomain = yes;' set, so I have been searching my records and
> found it!
> 
> All that setting 'auth-nxdomain = yes' does, it sets the nameserver to
> be authoritative for non existing domains, it has nothing to do with
> being authoritative for a dns domain.
> It used to default to 'yes' for compatibility with Bind8, it now
> defaults to no.
> 
> Rowland
>    
> 
> -- 
> To unsubscribe from this list go to the following URL and read the
> instructions:  https://lists.samba.org/mailman/options/samba
> 


-- 
To unsubscribe from this list go to the following URL and read the
instructions:  https://lists.samba.org/mailman/options/samba