Web lists-archives.com

Re: [Samba] Cannot scan to network share from Canon




scans is the share that the printer cannot reach

# This is the main Samba configuration file. For detailed information about the # options listed here, refer to the smb.conf(5) manual page. Samba has a huge # number of configurable options, most of which are not shown in this example.
#
# The Official Samba 3.2.x HOWTO and Reference Guide contains step-by-step
# guides for installing, configuring, and using Samba:
# http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf
#
# The Samba-3 by Example guide has working examples for smb.conf. This guide is
# generated daily: http://www.samba.org/samba/docs/Samba-Guide.pdf
#
# In this file, lines starting with a semicolon (;) or a hash (#) are
# comments and are ignored. This file uses hashes to denote commentary and
# semicolons for parts of the file you may wish to configure.
#
# Note: Run the "testparm" command after modifying this file to check for basic
# syntax errors.
#
#---------------
# Security-Enhanced Linux (SELinux) Notes:
#
# Turn the samba_domain_controller Boolean on to allow Samba to use the useradd # and groupadd family of binaries. Run the following command as the root user to
# turn this Boolean on:
# setsebool -P samba_domain_controller on
#
# Turn the samba_enable_home_dirs Boolean on if you want to share home
# directories via Samba. Run the following command as the root user to turn this
# Boolean on:
# setsebool -P samba_enable_home_dirs on
#
# If you create a new directory, such as a new top-level directory, label it
# with samba_share_t so that SELinux allows Samba to read and write to it. Do # not label system directories, such as /etc/ and /home/, with samba_share_t, as
# such directories should already have an SELinux label.
#
# Run the "ls -ldZ /path/to/directory" command to view the current SELinux
# label for a given directory.
#
# Set SELinux labels only on files and directories you have created. Use the
# chcon command to temporarily change a label:
# chcon -t samba_share_t /path/to/directory
#
# Changes made via chcon are lost when the file system is relabeled or commands
# such as restorecon are run.
#
# Use the samba_export_all_ro or samba_export_all_rw Boolean to share system
# directories. To share such directories and only allow read-only permissions:
# setsebool -P samba_export_all_ro on
# To share such directories and allow read and write permissions:
# setsebool -P samba_export_all_rw on
#
# To run scripts (preexec/root prexec/print command/...), copy them to the
# /var/lib/samba/scripts/ directory so that SELinux will allow smbd to run them.
# Note that if you move the scripts to /var/lib/samba/scripts/, they retain
# their existing SELinux labels, which may be labels that SELinux does not allow # smbd to run. Copying the scripts will result in the correct SELinux labels. # Run the "restorecon -R -v /var/lib/samba/scripts" command as the root user to
# apply the correct SELinux labels to these files.
#
#--------------
#
#======================= Global Settings =====================================

[global]

# ----------------------- Network-Related Options -------------------------
#
# workgroup = the Windows NT domain name or workgroup name, for example, MYGROUP.
#
# server string = the equivalent of the Windows NT Description field.
#
# netbios name = used to specify a server name that is not tied to the hostname.
#
# interfaces = used to configure Samba to listen on multiple network interfaces.
# If you have multiple interfaces, you can use the "interfaces =" option to
# configure which of those interfaces Samba listens on. Never omit the localhost
# interface (lo).
#
# hosts allow = the hosts allowed to connect. This option can also be used on a
# per-share basis.
#
# hosts deny = the hosts not allowed to connect. This option can also be used on
# a per-share basis.
#
# max protocol = used to define the supported protocol. The default is NT1. You
# can set it to SMB2 if you want experimental SMB2 support.
#
;    workgroup = MYGROUP
    workgroup = NBMDARTFORD
    server string = Samba Server Version %v

;    netbios name = MYSERVER
    netbios name = SCARECROW

;    interfaces = lo eth0 192.168.12.2/24 192.168.13.2/24
;    hosts allow = 127. 192.168.12. 192.168.13.
;    hosts allow = 127. 192.168.1.

;    max protocol = SMB2

# --------------------------- Logging Options -----------------------------
#
# log file = specify where log files are written to and how they are split.
#
# max log size = specify the maximum size log files are allowed to reach. Log
# files are rotated when they reach the size specified with "max log size".
#

    # log files split per-machine:
    log file = /var/log/samba/log.%m
    # maximum size of 50KB per log file, then rotate:
    max log size = 50

# ----------------------- Standalone Server Options ------------------------
#
# security = the mode Samba runs in. This can be set to user, share
# (deprecated), or server (deprecated).
#
# passdb backend = the backend used to store user information in. New
# installations should use either tdbsam or ldapsam. No additional configuration
# is required for tdbsam. The "smbpasswd" utility is available for backwards
# compatibility.
#

    security = user
    passdb backend = tdbsam

    map to guest = Bad User
    guest account = nobody

# ----------------------- Domain Members Options ------------------------
#
# security = must be set to domain or ads.
#
# passdb backend = the backend used to store user information in. New
# installations should use either tdbsam or ldapsam. No additional configuration
# is required for tdbsam. The "smbpasswd" utility is available for backwards
# compatibility.
#
# realm = only use the realm option when the "security = ads" option is set.
# The realm option specifies the Active Directory realm the host is a part of.
#
# password server = only use this option when the "security = server"
# option is set, or if you cannot use DNS to locate a Domain Controller. The
# argument list can include My_PDC_Name, [My_BDC_Name], and [My_Next_BDC_Name]:
#
# password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
#
# Use "password server = *" to automatically locate Domain Controllers.

;    security = domain
;    passdb backend = tdbsam
;    realm = MY_REALM

;    password server = <NT-Server-Name>

# ----------------------- Domain Controller Options ------------------------
#
# security = must be set to user for domain controllers.
#
# passdb backend = the backend used to store user information in. New
# installations should use either tdbsam or ldapsam. No additional configuration
# is required for tdbsam. The "smbpasswd" utility is available for backwards
# compatibility.
#
# domain master = specifies Samba to be the Domain Master Browser, allowing
# Samba to collate browse lists between subnets. Do not use the "domain master" # option if you already have a Windows NT domain controller performing this task.
#
# domain logons = allows Samba to provide a network logon service for Windows
# workstations.
#
# logon script = specifies a script to run at login time on the client. These
# scripts must be provided in a share named NETLOGON.
#
# logon path = specifies (with a UNC path) where user profiles are stored.
#
#
;    security = user
;    passdb backend = tdbsam

    domain master = yes
    domain logons = yes

    # the following login script name is determined by the machine name
    # (%m):
;    logon script = %m.bat
    # the following login script name is determined by the UNIX user used:
;    logon script = %u.bat
    logon path = \\%L\Profiles\%U
    logon drive = H:
    logon home = \\%L\%U
    # use an empty path to disable profile support:
;    logon path =

    # various scripts can be used on a domain controller or a stand-alone
    # machine to add or delete corresponding UNIX accounts:

    add user script = /usr/sbin/useradd "%u" -n -g users
    add group script = /usr/sbin/groupadd "%g"
    add machine script = /usr/sbin/useradd -n -c "Workstation (%u)" -M -d /nohome -s /bin/false "%u"
    delete user script = /usr/sbin/userdel "%u"
    delete user from group script = /usr/sbin/userdel "%u" "%g"
    delete group script = /usr/sbin/groupdel "%g"

;admin users = matthew.broadhead
admin users = richard.broadhead

# ----------------------- Browser Control Options ----------------------------
#
# local master = when set to no, Samba does not become the master browser on
# your network. When set to yes, normal election rules apply.
#
# os level = determines the precedence the server has in master browser
# elections. The default value should be reasonable.
#
# preferred master = when set to yes, Samba forces a local browser election at # start up (and gives itself a slightly higher chance of winning the election).
#
;    local master = no
;    os level = 33
;    preferred master = yes

#----------------------------- Name Resolution -------------------------------
#
# This section details the support for the Windows Internet Name Service (WINS).
#
# Note: Samba can be either a WINS server or a WINS client, but not both.
#
# wins support = when set to yes, the NMBD component of Samba enables its WINS
# server.
#
# wins server = tells the NMBD component of Samba to be a WINS client.
#
# wins proxy = when set to yes, Samba answers name resolution queries on behalf
# of a non WINS capable client. For this to work, there must be at least one
# WINS server on the network. The default is no.
#
# dns proxy = when set to yes, Samba attempts to resolve NetBIOS names via DNS
# nslookups.

    wins support = yes
;    wins server = w.x.y.z
;    wins proxy = yes

;    dns proxy = yes

# --------------------------- Printing Options -----------------------------
#
# The options in this section allow you to configure a non-default printing
# system.
#
# load printers = when set you yes, the list of printers is automatically
# loaded, rather than setting them up individually.
#
# cups options = allows you to pass options to the CUPS library. Setting this # option to raw, for example, allows you to use drivers on your Windows clients.
#
# printcap name = used to specify an alternative printcap file.
#

    load printers = yes
    cups options = raw

;    printcap name = /etc/printcap
    # obtain a list of printers automatically on UNIX System V systems:
;    printcap name = lpstat
;    printing = cups

# --------------------------- File System Options ---------------------------
#
# The options in this section can be un-commented if the file system supports
# extended attributes, and those attributes are enabled (usually via the
# "user_xattr" mount option). These options allow the administrator to specify # that DOS attributes are stored in extended attributes and also make sure that
# Samba does not change the permission bits.
#
# Note: These options can be used on a per-share basis. Setting them globally
# (in the [global] section) makes them the default for all shares.

;    map archive = no
;    map hidden = no
;    map read only = no
;    map system = no
;    store dos attributes = yes


#============================ Share Definitions ==============================

[homes]
    comment = Home Directories
    browseable = no
    writable = yes
    valid users = %S
;    valid users = MYDOMAIN\%S

[printers]
    comment = All Printers
    path = /var/spool/samba
    browseable = no
    guest ok = no
    writable = no
    printable = yes

# Un-comment the following and create the netlogon directory for Domain Logons:
    [netlogon]
    comment = Network Logon Service
    path = /var/lib/samba/netlogon
;    guest ok = yes
;    writable = no
;    share modes = no

# Un-comment the following to provide a specific roving profile share.
# The default is to use the user's home directory:
    [Profiles]
    path = /var/lib/samba/profiles
    browseable = no
    read only = no
;    create mask = 0600
;    directory mask = 0700
    profile acls = yes
;    csc policy = disable
;    guest ok = yes

# A publicly accessible directory that is read only, except for users in the
# "staff" group (which have write permissions):
;    [public]
;    comment = Public Stuff
;    path = /home/samba
;    public = yes
;    writable = yes
;    printable = no
;    write list = +staff

[software]
    path = /home/software
    read only = no
    valid users = @users
    write list = @users
    browseable = no
    # force create mode = 770
    create mask = 0664
        force directory mode = 0775

[legal]
    path = /home/legal
    read only = no
    valid users = @users
    write list = @users
    writable = yes
    #force create mode = 770
    create mask = 0664
        force directory mode = 0775

[laserform]
    path = /home/laserform
    read only = no
    valid users = @users
    valid users = +users
    force create mode = 770

[applications]
    path = /home/applications
    read only = no
    guest ok = yes

[scans]
    path = /home/scans
    read only = no
    guest ok = yes
    public = yes

On 06/12/2018 11:54, Rowland Penny via samba wrote:
On Thu, 6 Dec 2018 11:41:04 +0100
Matthew Broadhead via samba <samba@xxxxxxxxxxxxxxx> wrote:

just checked the logs and i get this

[root@localhost ~]# tail /var/log/samba/log.rnp00267380a647
[2018/12/05 11:27:36.333627,  0]
../lib/param/loadparm.c:1844(lpcfg_do_service_parameter)
    Ignoring unknown parameter "profile acls"
[2018/12/05 11:51:20.390991,  0]
../lib/param/loadparm.c:784(lpcfg_map_parameter)
    Unknown parameter encountered: "profile acls"
[2018/12/05 11:51:20.391441,  0]
../lib/param/loadparm.c:1844(lpcfg_do_service_parameter)
    Ignoring unknown parameter "profile acls"
[2018/12/05 11:53:51.060095,  0]
../lib/param/loadparm.c:784(lpcfg_map_parameter)
    Unknown parameter encountered: "profile acls"
[2018/12/05 11:53:51.060209,  0]
../lib/param/loadparm.c:1844(lpcfg_do_service_parameter)
    Ignoring unknown parameter "profile acls"
[root@localhost ~]# tail -n 200 /var/log/samba/log.rnp00267380a647
[2018/12/05 10:06:21.081708,  0]
../lib/param/loadparm.c:784(lpcfg_map_parameter)
    Unknown parameter encountered: "profile acls"
[2018/12/05 10:06:21.081856,  0]
../lib/param/loadparm.c:1844(lpcfg_do_service_parameter)
    Ignoring unknown parameter "profile acls"
[2018/12/05 11:27:36.333489,  0]
../lib/param/loadparm.c:784(lpcfg_map_parameter)
    Unknown parameter encountered: "profile acls"
[2018/12/05 11:27:36.333627,  0]
../lib/param/loadparm.c:1844(lpcfg_do_service_parameter)
    Ignoring unknown parameter "profile acls"
[2018/12/05 11:51:20.390991,  0]
../lib/param/loadparm.c:784(lpcfg_map_parameter)
    Unknown parameter encountered: "profile acls"
[2018/12/05 11:51:20.391441,  0]
../lib/param/loadparm.c:1844(lpcfg_do_service_parameter)
    Ignoring unknown parameter "profile acls"
[2018/12/05 11:53:51.060095,  0]
../lib/param/loadparm.c:784(lpcfg_map_parameter)
    Unknown parameter encountered: "profile acls"
[2018/12/05 11:53:51.060209,  0]
../lib/param/loadparm.c:1844(lpcfg_do_service_parameter)
    Ignoring unknown parameter "profile acls"

On 05/12/2018 20:08, David Roth via samba wrote:
Does anything show up in the Samba logs for this?

On Wed, Dec 5, 2018 at 10:29 AM Matthew Broadhead via samba <
samba@xxxxxxxxxxxxxxx> wrote:

The server is using centos-release-7-6.1810.2.el7.centos.x86_64.
After an automatic yum update on the morning of 4th December 2018
from samba-4.7.1-9.el7_5.x86_64 to samba-4.8.3-4.el7.x86_64 we can
no longer scan from a Canon Aficio MP 301 to a network share
(guest allowed). Scanning to windows machines works fine.



The 'profile acls' parameter was removed at 4.8.0.
It might help if you post your smb.conf

Rowland



--
To unsubscribe from this list go to the following URL and read the
instructions:  https://lists.samba.org/mailman/options/samba