Re: [Samba] Samba Share : Connection refused
- Date: Mon, 9 Jul 2018 16:01:23 +0200
- From: john doe via samba <samba@xxxxxxxxxxxxxxx>
- Subject: Re: [Samba] Samba Share : Connection refused
On 7/9/2018 1:09 PM, Sascha Wiechmann via samba wrote:
I would agree but I am sure it ran in tests before my holidays. I also
[2018/07/09 13:07:06.616097, 0] ../source3/lib/access.c:338(allow_access)
Denied connection from 192.168.4.111 (192.168.4.111)
in the samba log - so for me, I got a connection but samba is refusing it?
Am 09.07.2018 um 11:34 schrieb Rowland Penny via samba:
On Mon, 9 Jul 2018 11:16:44 +0200
Sascha Wiechmann via samba <samba@xxxxxxxxxxxxxxx> wrote:
thanks for your fast reply. Maybe there was a problem on format in the
email as testparm works fine on my server. But I also did not write
about distribution and version, sorry.
This conf is given by Yast tool from SuSE LEAP 42.2 by default. I just
added the few parameters I need. So maybe I should clean out a bit - I
still do not need any domain settings.
But does this the trick?
I sounds like you just want a standalone server, If so, try this:
workgroup = workgroup # NOTE: if the workgroup name really is
# you might as well remove it, it is
security = user
netbios name = SRV1
printing = cups
printcap name = cups
printcap cache time = 750
cups options = raw
map to guest = Bad User
wins support = Yes # If you have any other wins servers, remove
log file = /var/log/samba/log.%I
log level = 2
hosts allow = 192.168.0.0/24 192.168.4.0/24
hosts deny = ALL
With this smb.conf, users on machines in the subnets 192.168.0.0/24 &
192.168.4.0/24 should be able to connect. If they cannot now and could
before you installed the firewall device, I would suspect the firewall
If one of the maintaner of Samba suggest you to start with a basic
smb.conf file I would follow his advice especially when you ask help on
the Samba mailing list.
To unsubscribe from this list go to the following URL and read the