Re: [Samba] Samba Share : Connection refused
- Date: Mon, 9 Jul 2018 10:34:22 +0100
- From: Rowland Penny via samba <samba@xxxxxxxxxxxxxxx>
- Subject: Re: [Samba] Samba Share : Connection refused
On Mon, 9 Jul 2018 11:16:44 +0200
Sascha Wiechmann via samba <samba@xxxxxxxxxxxxxxx> wrote:
> Hi Rowland,
> thanks for your fast reply. Maybe there was a problem on format in the
> email as testparm works fine on my server. But I also did not write
> about distribution and version, sorry.
> This conf is given by Yast tool from SuSE LEAP 42.2 by default. I just
> added the few parameters I need. So maybe I should clean out a bit - I
> still do not need any domain settings.
> But does this the trick?
I sounds like you just want a standalone server, If so, try this:
workgroup = workgroup # NOTE: if the workgroup name really is 'workgroup'
# you might as well remove it, it is the default.
security = user
netbios name = SRV1
printing = cups
printcap name = cups
printcap cache time = 750
cups options = raw
map to guest = Bad User
wins support = Yes # If you have any other wins servers, remove this.
log file = /var/log/samba/log.%I
log level = 2
hosts allow = 192.168.0.0/24 192.168.4.0/24
hosts deny = ALL
With this smb.conf, users on machines in the subnets 192.168.0.0/24 &
192.168.4.0/24 should be able to connect. If they cannot now and could
before you installed the firewall device, I would suspect the firewall
To unsubscribe from this list go to the following URL and read the