Web lists-archives.com

Re: [Samba] Active directory sites & subnets




It sure helps!! Thank you!! :)

As for the basic configuration of sites, I had already done and it is ok.

My doubt was about your placement regarding subnets where the DC would not
be directly connected, would be placed as close to a site as possible. I
could not see it via RSAT.

Anyway, thank you for your willingness to help!

On Thu, Jun 28, 2018 at 10:40 AM lingpanda101 <lingpanda101@xxxxxxxxx>
wrote:

> On 6/28/2018 9:20 AM, Elias Pereira wrote:
>
> Thanks for the answer ligpanda101!!
>
> For DC's that are not present on a subnet, assign the subnet to the closet
>> site to a DC
>
>
> Visibly via RSAT, how would that look?
>
> On Wed, Jun 27, 2018 at 1:06 PM lingpanda101 <lingpanda101@xxxxxxxxx>
> wrote:
>
>> On 6/27/2018 11:44 AM, Elias Pereira via samba wrote:
>> > Hello,
>> >
>> > Reading about, specifically in the wiki
>> > <https://wiki.samba.org/index.php/Active_Directory_Sites> link, says
>> the
>> > following about subnets.
>> >
>> > "Create a subnet entry for all subnets in your network and assign them
>> to a
>> > site:"
>> >
>> > The subnet on which our DCs are configured is a public IP block, but the
>> > client machines are in a subnet with a private address block.
>> >
>> > Do I need to configure all the subnets that we have in our network or
>> only
>> > to which the DCs are configured?
>> >
>> You should add all your subnets in your network. If you have hundreds of
>> subnets, just use a CIDR notation such as ie., 10.0.0.0/8 if needed, so
>> as to not type them all out. For DC's that are not present on a subnet,
>> assign the subnet to the closet site to a DC.
>>
>> --
>>
>> -JAMES
>>
>>
>
> --
> Elias Pereira
>
> Elias,
>
>     Below is taken from a quick google search from a Microsoft DOC. It
> does a good job explaining the steps to create sites and subnets.
> Additionally when you go to create the subnet, the GUI will provide
> examples on how to enter for IPv4 and IPv6 subnets. I hope this helps.
> To configure additional Active Directory sites
>
>    1.
>
>    On the primary domain controller, click *Start*, and then click *Active
>    Directory Sites and Services*.
>    2.
>
>    In the Active Directory Sites and Services console, in the console
>    tree, right-click *Sites*, and then click *New Site*.
>    3.
>
>    On the *New Object - Site* dialog box, in the *Name* box, enter a name
>    for the new site.
>    4.
>
>    In *Link Name*, click a site link object, and then click *OK* twice.
>    5.
>
>    In the console tree, expand *Sites*, right-click *Subnets*, and then
>    click *New Subnet*.
>    6.
>
>    On the *New Object - Subnet* dialog box, under *Prefix*, type the IPv4
>    or IPv6 subnet prefix, in the *Select a site object for this prefix*
>    list, click the site to associate with this subnet, and then click *OK*.
>
>    7.
>
>    Repeat steps 5 and 6 until you have created all the subnets required
>    in your deployment.
>    8.
>
>    Close Active Directory Sites and Services.
>
> -James
>
>

-- 
Elias Pereira
-- 
To unsubscribe from this list go to the following URL and read the
instructions:  https://lists.samba.org/mailman/options/samba