Re: [Samba] Replication Failure Issue
- Date: Mon, 26 Mar 2018 10:01:48 +1100
- From: David Minard via samba <samba@xxxxxxxxxxxxxxx>
- Subject: Re: [Samba] Replication Failure Issue
On 24/03/18 01:35, lingpanda101 wrote:
On 3/22/2018 8:06 PM, David Minard wrote:
I myself would hold off updating until you correct the DC's with the
issues. Anything in the Samba logs or yum history stand out? You can try
and force replication 'samba-tool drs replicate --full-sync' from
FirstDC to SecondDC.
Will replay to all messages so far in this one to keep it all
On 21/03/18 22:52, lingpanda101 wrote:
On 3/21/2018 7:32 AM, David Minard via samba wrote:
The thing is, that I did not upgrade the version of Samba - that is
the next step, so the ports used would not have changed. I only
updated the OS.
On 21/03/2018, at 10:04 PM, Carlos Alberto Panozzo Cunha
I have same problem after update for samba.
I allow new ports in firewall.
On Wed, Mar 21, 2018, 00:15 David Minard via samba
I have 4 DCs on Centos 7.1. Everything was working really
years, including replication.
Then I decided that the OS needed updating. Did the yum
update on one
of the DCs, rebooted. That server is now running Centos 7.4. Samba
seemed to start okay.
However, samba-tool drs showrepl gives this error on all 3
of the other
DCs, and shows success on the updated DC.
Default-First-Site-Name\SAMBA4-10 via RPC
DSA object GUID: 7fa7fc88-8d99-4217-b329-7e82324ec084
Last attempt @ Wed Mar 21 12:58:13 2018 AEDT
failed, result 58
10623 consecutive failure(s).
Last success @ Thu Mar 8 14:34:14 2018 AEDT
Any thoughts on why this DC is now not replicating
thoughts on how to remedy this?
You most likely will need to turn up the samba log level to get
additional information but you can start with running 'yum history
list all' and post results. This might help identify the changes that
were made to the OS. Are you using bind or the internal DNS?
I will turn up the logs and test it out.
I use Bind-9.9.4-51 (before update 9.9.4-18)
yum history shows 348 packages that got updated... Bind being one.
Will sift through them.
My firewall is very lose. All ports are open for the subnets on which
the samba servers need to talk. eg:
-A INPUT -s 172.20.0.0/16 -p tcp -m state --state NEW -m tcp -j ACCEPT
-A INPUT -s 172.20.0.0/16 -p udp -m state --state NEW -m udp -j ACCEPT
When I first set this up with 4.0.0-a2 (or whatever it was right at
the beginning), I was not able to work out what ports exactly were
needed, hence the lose rules. Now I see they are documented clearly on
the Samba site, I will tighten them up, but not until the issue is
My samba is complied from source. I am currently running 4.3.2. It's
been running flawlessly so no urgency to update, until the huge
security hole was announced the other week. Now I've got to get it
done, but want the ailing server going right first - or should I just
do the updates and then worry about the ailing server?
# Global parameters
workgroup = SCEM_AD
realm = samba4.scem.westernsydney.edu.au
netbios name = SAMBA4-10
server role = active directory domain controller
server services = s3fs, rpc, nbt, wrepl, ldap, cldap, kdc, drepl,
winbindd, ntp_signd, kcc, dnsupdate
# log level = 1 auth:2
# logs split per machine
log file = /var/log/samba/log.%m
# max 50KB per log file, then rotate
max log size = 0
read only = No
path = /usr/local/samba/var/locks/sysvol
read only = No
It is the out of the box config from the original provision.
Going through the yum history, there were 348 updates. Bind,
The firmware updates.
I can list them all, but it's rather long (348 updates).
Never needed to, but can I undo certain yum updates?
Nothing seems to stand out in the samba logs either. Will investigate
with higher debug levels between working and less working server.
I will try the forced replication with debug flag.
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
To unsubscribe from this list go to the following URL and read the