Web lists-archives.com

Re: [Samba] Problem configuring a Samba share! :(




Please check my answer below. ;)

On Tue, 2017-11-28 at 15:38 -0500, Sébastien Boulianne via samba wrote:
> Same...
> Share is not listed...
> 
> Yes, I restarted the services. ;)
> 
> Sébastien Boulianne
> 
> -----Message d'origine-----
> De : samba [mailto:samba-bounces@xxxxxxxxxxxxxxx] De la part de 
> Rowland Penny via samba Envoyé : 28 novembre 2017 15:25 À : 
> samba@xxxxxxxxxxxxxxx Objet : Re: [Samba] Problem configuring a Samba 
> share! :(
> 
> On Tue, 28 Nov 2017 14:26:58 -0500
> Sébastien Boulianne via samba <samba@xxxxxxxxxxxxxxx> wrote:
> 
> > Hi,
> > 
> > I want to create a share FTPFiles.
> > I searched a lot and tried many configuration but I can't see the 
> > share.
> > 
> > I used many commands to show you all my config.
> > Could you help me to find where is my issue ?
> > 
> > https://pastebin.com/VJjMsh60
> > The permission and the ownership on /glftpd/site (777 root/root) 
> > need to stay like that.
> > 
> > Thanks you very much in advance for your help!
> > 
> > Sébastien
> > 
> > 
> 
> Try removing the 'access based share enum' & 'valid users' lines from 
> [FTPFiles] Also move the 'printcap name' & 'load printers' lines from 
> wherever they are to [global].
> 
> Rowland
> 
> --
> To unsubscribe from this list go to the following URL and read the
> instructions:  https://lists.samba.org/mailman/options/samba

Your configuration will only accept connections from a user called FTPFiles so you might want to verify that user account.  Is it an AD user?
-- How do you see that ?

If you have AD -> Unix users setup correctly (winbind NSS), you could use su to switch to that account and check if it can access the directory on the file system.
--- Here is my nsswitch.conf. https://pastebin.com/95f6LVq4

You don't show the permissions on /glftpd - is is at least o=rx?
-- Perms are drwxr-xr-x  13 root root 4.0K Nov 27 17:36 glftpd

I suggest you start with something like this:

[shared]
        path       = /srv/shared
        comment    = Shared data
        read only  = no
        browseable = yes

With permissions explicitly set for the user and group.  Get that working first.  Then change *one* thing and test it, at a time until you get to where you want to be.
--- How can I set the permissions explicitly for the user and group ?

Cheers on
To unsubscribe from this list go to the following URL and read the
instructions:  https://lists.samba.org/mailman/options/samba
-- 
To unsubscribe from this list go to the following URL and read the
instructions:  https://lists.samba.org/mailman/options/samba