Re: [Samba] Domain DFS on new share
- Date: Thu, 20 Apr 2017 16:27:27 -0700
- From: Jeremy Allison via samba <samba@xxxxxxxxxxxxxxx>
- Subject: Re: [Samba] Domain DFS on new share
On Fri, Apr 21, 2017 at 12:09:25AM +0100, Jonathan Hunter via samba wrote:
> I am trying to configure domain DFS (I think that's the correct term)
> as below, using the guide on the wiki:
> I am aware that the wiki says that this doesn't quite work... however
> it feels to me that it's very close, nearly working, and I might be
> able to get it going (hopefully?!) by means of a simple fix.. I can
> dream, can't I?
> My goal is not to enable DFS-R (that's a whole other conversation -
> and I use lsyncd for sysvol etc. at the moment, anyway) but rather to
> simply use the redirection features so that (for example)
> \\mydomain\dfs\publishedshare goes to \\myserver\realshare.
> My setup is as follows.
> On each of my four DCs, I have added the following to smb.conf:
> path = /usr/local/samba/dfsroot
> msdfs root = Yes
> And in /usr/local/samba/dfsroot, again on all four DCs, I have a symlink:
> lrwxrwxrwx 1 root root 38 Apr 15 01:14 test ->
> The DCs already have the following (confirmed using testparm) :
> vfs objects = dfs_samba4 acl_xattr
> This new 'dfs' share works fine from my test Windows 7 and Windows 10
> clients, if I access it via \\dc1\dfs, \\dc1\dfs\test, \\dc2\dfs\test,
> \\dc3\dfs and so on.
> However, if I access the very same share via \\mydomain\dfs or
> \\mydomain\dfs\test instead, then it fails with the following error:
> Windows cannot access \\mydomain\dfs. Error code 0x80070035 The
> network path was not found.
Wireshark trace needed I think.
To unsubscribe from this list go to the following URL and read the