[PATCH 2/2] PCI: Create device link for NVIDIA GPU
- Date: Fri, 31 May 2019 10:31:09 +0530
- From: Abhishek Sahu <abhsahu@xxxxxxxxxx>
- Subject: [PATCH 2/2] PCI: Create device link for NVIDIA GPU
NVIDIA Turing GPUs include hardware support for USB Type-C and
VirtualLink. It helps in delivering the power, display, and data
required to power VR headsets through a single USB Type-C connector.
The Turing GPU is a multi-function PCI device has the following
- VGA display controller (Function 0)
- Audio controller (Function 1)
- USB xHCI Host controller (Function 2)
- USB Type-C USCI controller (Function 3)
The function 0 is tightly coupled with other functions in the
hardware. When function 0 goes in runtime suspended state,
then it will do power gating for most of the hardware blocks.
Some of these hardware blocks are used by other functions which
leads to functional failure. So if any of these functions (1/2/3)
are active, then function 0 should also be in active state.
'commit 07f4f97d7b4b ("vga_switcheroo: Use device link for
HDA controller")' creates the device link from function 1 to
function 0. A similar kind of device link needs to be created
between function 0 and functions 2 and 3 for NVIDIA Turing GPU.
This patch does the same and create the required device links. It
will make function 0 to be runtime PM active if other functions
are still active.
Signed-off-by: Abhishek Sahu <abhsahu@xxxxxxxxxx>
drivers/pci/quirks.c | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index a20f7771a323..afdbc199efc5 100644
@@ -4967,6 +4967,29 @@ DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_AMD, PCI_ANY_ID,
PCI_CLASS_MULTIMEDIA_HD_AUDIO, 8, quirk_gpu_hda);
+/* Create device link for NVIDIA GPU with integrated USB controller to VGA. */
+static void quirk_gpu_usb(struct pci_dev *usb)
+ pci_create_device_link_with_vga(usb, 2);
+ PCI_CLASS_SERIAL_USB, 8, quirk_gpu_usb);
+ * Create device link for NVIDIA GPU with integrated Type-C UCSI controller
+ * to VGA. Currently there is no class code defined for UCSI device over PCI
+ * so using UNKNOWN class for now and it will be updated when UCSI
+ * over PCI gets a class code.
+#define PCI_CLASS_SERIAL_UNKNOWN 0x0c80
+static void quirk_gpu_usb_typec_ucsi(struct pci_dev *ucsi)
+ pci_create_device_link_with_vga(ucsi, 3);
+ PCI_CLASS_SERIAL_UNKNOWN, 8,
* Some IDT switches incorrectly flag an ACS Source Validation error on
* completions for config read requests even though PCIe r4.0, sec