Web lists-archives.com

[PATCH 4.4 012/266] USB: Consolidate LPM checks to avoid enabling LPM twice




From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>

commit d7a6c0ce8d26412903c7981503bad9e1cc7c45d2 upstream.

USB Bluetooth controller QCA ROME (0cf3:e007) sometimes stops working
after S3:
[ 165.110742] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[ 168.432065] Bluetooth: hci0: Failed to send body at 4 of 1953 (-110)

After some experiments, I found that disabling LPM can workaround the
issue.

On some platforms, the USB power is cut during S3, so the driver uses
reset-resume to resume the device. During port resume, LPM gets enabled
twice, by usb_reset_and_verify_device() and usb_port_resume().

Consolidate all checks into new LPM helpers to make sure LPM only gets
enabled once.

Fixes: de68bab4fa96 ("usb: Don't enable USB 2.0 Link PM by default.”)
Signed-off-by: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
Cc: stable <stable@xxxxxxxxxxxxxxx> # after much soaking
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/usb/core/driver.c  |   11 ++++++++---
 drivers/usb/core/hub.c     |   12 ++++--------
 drivers/usb/core/message.c |    3 +--
 3 files changed, 13 insertions(+), 13 deletions(-)

--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -1893,9 +1893,6 @@ static int usb_set_usb2_hardware_lpm(str
 	struct usb_hcd *hcd = bus_to_hcd(udev->bus);
 	int ret = -EPERM;
 
-	if (enable && !udev->usb2_hw_lpm_allowed)
-		return 0;
-
 	if (hcd->driver->set_usb2_hw_lpm) {
 		ret = hcd->driver->set_usb2_hw_lpm(hcd, udev, enable);
 		if (!ret)
@@ -1907,11 +1904,19 @@ static int usb_set_usb2_hardware_lpm(str
 
 int usb_enable_usb2_hardware_lpm(struct usb_device *udev)
 {
+	if (!udev->usb2_hw_lpm_capable ||
+	    !udev->usb2_hw_lpm_allowed ||
+	    udev->usb2_hw_lpm_enabled)
+		return 0;
+
 	return usb_set_usb2_hardware_lpm(udev, 1);
 }
 
 int usb_disable_usb2_hardware_lpm(struct usb_device *udev)
 {
+	if (!udev->usb2_hw_lpm_enabled)
+		return 0;
+
 	return usb_set_usb2_hardware_lpm(udev, 0);
 }
 
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -3116,8 +3116,7 @@ int usb_port_suspend(struct usb_device *
 	}
 
 	/* disable USB2 hardware LPM */
-	if (udev->usb2_hw_lpm_enabled == 1)
-		usb_disable_usb2_hardware_lpm(udev);
+	usb_disable_usb2_hardware_lpm(udev);
 
 	if (usb_disable_ltm(udev)) {
 		dev_err(&udev->dev, "Failed to disable LTM before suspend\n.");
@@ -3163,8 +3162,7 @@ int usb_port_suspend(struct usb_device *
 		usb_enable_ltm(udev);
  err_ltm:
 		/* Try to enable USB2 hardware LPM again */
-		if (udev->usb2_hw_lpm_capable == 1)
-			usb_enable_usb2_hardware_lpm(udev);
+		usb_enable_usb2_hardware_lpm(udev);
 
 		if (udev->do_remote_wakeup)
 			(void) usb_disable_remote_wakeup(udev);
@@ -3443,8 +3441,7 @@ int usb_port_resume(struct usb_device *u
 		hub_port_logical_disconnect(hub, port1);
 	} else  {
 		/* Try to enable USB2 hardware LPM */
-		if (udev->usb2_hw_lpm_capable == 1)
-			usb_enable_usb2_hardware_lpm(udev);
+		usb_enable_usb2_hardware_lpm(udev);
 
 		/* Try to enable USB3 LTM and LPM */
 		usb_enable_ltm(udev);
@@ -5415,8 +5412,7 @@ static int usb_reset_and_verify_device(s
 	/* Disable USB2 hardware LPM.
 	 * It will be re-enabled by the enumeration process.
 	 */
-	if (udev->usb2_hw_lpm_enabled == 1)
-		usb_disable_usb2_hardware_lpm(udev);
+	usb_disable_usb2_hardware_lpm(udev);
 
 	/* Disable LPM and LTM while we reset the device and reinstall the alt
 	 * settings.  Device-initiated LPM settings, and system exit latency
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1184,8 +1184,7 @@ void usb_disable_device(struct usb_devic
 			dev->actconfig->interface[i] = NULL;
 		}
 
-		if (dev->usb2_hw_lpm_enabled == 1)
-			usb_disable_usb2_hardware_lpm(dev);
+		usb_disable_usb2_hardware_lpm(dev);
 		usb_unlocked_disable_lpm(dev);
 		usb_disable_ltm(dev);