[PATCH v4 0/2] Add support for the Purism Librem5 devkit
- Date: Mon, 15 Apr 2019 16:53:41 -0700
- From: "Angus Ainslie (Purism)" <angus@xxxxxxxx>
- Subject: [PATCH v4 0/2] Add support for the Purism Librem5 devkit
The Librem5 devkit is based on the imx8mq from NXP. This is a default
devicetree to boot the board to a command prompt.
Changes since v3:
Freshly sorted and pressed nodes.
Change the backlight to an interpolated scale.
Dropped devkit version number to match debian MR.
Changes since v2:
Fixed incorrect phy-supply for the fsl-fec.
Dropped unused regulator property.
Fixup Makefile for linux-next.
Changes since v1:
Dropped config file.
Updated the board compatible label.
Changed node names to follow naming conventions.
Added a more complete regulator hierachy.
Removed unused nodes.
Removed unknown devices.
Fixed comment style.
Dropped undocumented properties.
Angus Ainslie (Purism) (2):
arm64: dts: fsl: librem5: Add a device tree for the Librem5 devkit
dt-bindings: Add an entry for Purism SPC
.../devicetree/bindings/vendor-prefixes.txt | 1 +
arch/arm64/boot/dts/freescale/Makefile | 1 +
.../dts/freescale/imx8mq-librem5-devkit.dts | 822 ++++++++++++++++++
3 files changed, 824 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts