Web lists-archives.com

Re: [PATCH 1/6] ARM: ks8695: watchdog: stop using mach/*.h




On Mon, Apr 15, 2019 at 10:24:13PM +0200, Arnd Bergmann wrote:
> drivers should not rely on machine specific headers but
> get their information from the platform device.
> 
> Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
> ---
>  arch/arm/mach-ks8695/devices.c | 13 ++++++++++++-
>  drivers/watchdog/Kconfig       |  2 +-
>  drivers/watchdog/ks8695_wdt.c  | 30 +++++++++++++++++-------------
>  3 files changed, 30 insertions(+), 15 deletions(-)
> 
> diff --git a/arch/arm/mach-ks8695/devices.c b/arch/arm/mach-ks8695/devices.c
> index 61cf20beb45f..57766817d86f 100644
> --- a/arch/arm/mach-ks8695/devices.c
> +++ b/arch/arm/mach-ks8695/devices.c
> @@ -169,11 +169,22 @@ void __init ks8696_add_device_hpna(void)
>  /* --------------------------------------------------------------------
>   *  Watchdog
>   * -------------------------------------------------------------------- */
> +#define KS8695_TMR_OFFSET      (0xF0000 + 0xE400)
> +#define KS8695_TMR_PA          (KS8695_IO_PA + KS8695_TMR_OFFSET)
> +static struct resource ks8695_wdt_resources[] = {
> +	[0] = {
> +		.name	= "tmr",
> +		.start	= KS8695_TMR_PA,
> +		.end	= KS8695_TMR_PA + 0xf,
> +		.flags	= IORESOURCE_MEM,
> +	},
> +};
>  
>  static struct platform_device ks8695_wdt_device = {
>  	.name		= "ks8695_wdt",
>  	.id		= -1,
> -	.num_resources	= 0,
> +	.resource	= ks8695_wdt_resources,
> +	.num_resources	= ARRAY_SIZE(ks8695_wdt_resources),
>  };
>  
>  static void __init ks8695_add_device_watchdog(void)
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index 242eea859637..046e01daef57 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -397,7 +397,7 @@ config IXP4XX_WATCHDOG
>  
>  config KS8695_WATCHDOG
>  	tristate "KS8695 watchdog"
> -	depends on ARCH_KS8695
> +	depends on ARCH_KS8695 || COMPILE_TEST

Is __raw_readl / __raw_writel really available for all architectures / platforms ?

>  	help
>  	  Watchdog timer embedded into KS8695 processor. This will reboot your
>  	  system when the timeout is reached.
> diff --git a/drivers/watchdog/ks8695_wdt.c b/drivers/watchdog/ks8695_wdt.c
> index 1e41818a44bc..87c542c2f912 100644
> --- a/drivers/watchdog/ks8695_wdt.c
> +++ b/drivers/watchdog/ks8695_wdt.c
> @@ -23,10 +23,8 @@
>  #include <linux/watchdog.h>
>  #include <linux/io.h>
>  #include <linux/uaccess.h>
> -#include <mach/hardware.h>
>  
> -#define KS8695_TMR_OFFSET	(0xF0000 + 0xE400)
> -#define KS8695_TMR_VA		(KS8695_IO_VA + KS8695_TMR_OFFSET)
> +#define KS8695_CLOCK_RATE  25000000
>  
>  /*
>   * Timer registers
> @@ -57,6 +55,7 @@ MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
>  
>  static unsigned long ks8695wdt_busy;
>  static DEFINE_SPINLOCK(ks8695_lock);
> +static void __iomem *tmr_reg;
>  
>  /* ......................................................................... */
>  
> @@ -69,8 +68,8 @@ static inline void ks8695_wdt_stop(void)
>  
>  	spin_lock(&ks8695_lock);
>  	/* disable timer0 */
> -	tmcon = __raw_readl(KS8695_TMR_VA + KS8695_TMCON);
> -	__raw_writel(tmcon & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
> +	tmcon = __raw_readl(tmr_reg + KS8695_TMCON);
> +	__raw_writel(tmcon & ~TMCON_T0EN, tmr_reg + KS8695_TMCON);
>  	spin_unlock(&ks8695_lock);
>  }
>  
> @@ -84,15 +83,15 @@ static inline void ks8695_wdt_start(void)
>  
>  	spin_lock(&ks8695_lock);
>  	/* disable timer0 */
> -	tmcon = __raw_readl(KS8695_TMR_VA + KS8695_TMCON);
> -	__raw_writel(tmcon & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
> +	tmcon = __raw_readl(tmr_reg + KS8695_TMCON);
> +	__raw_writel(tmcon & ~TMCON_T0EN, tmr_reg + KS8695_TMCON);
>  
>  	/* program timer0 */
> -	__raw_writel(tval | T0TC_WATCHDOG, KS8695_TMR_VA + KS8695_T0TC);
> +	__raw_writel(tval | T0TC_WATCHDOG, tmr_reg + KS8695_T0TC);
>  
>  	/* re-enable timer0 */
> -	tmcon = __raw_readl(KS8695_TMR_VA + KS8695_TMCON);
> -	__raw_writel(tmcon | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
> +	tmcon = __raw_readl(tmr_reg + KS8695_TMCON);
> +	__raw_writel(tmcon | TMCON_T0EN, tmr_reg + KS8695_TMCON);
>  	spin_unlock(&ks8695_lock);
>  }
>  
> @@ -105,9 +104,9 @@ static inline void ks8695_wdt_reload(void)
>  
>  	spin_lock(&ks8695_lock);
>  	/* disable, then re-enable timer0 */
> -	tmcon = __raw_readl(KS8695_TMR_VA + KS8695_TMCON);
> -	__raw_writel(tmcon & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
> -	__raw_writel(tmcon | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
> +	tmcon = __raw_readl(tmr_reg + KS8695_TMCON);
> +	__raw_writel(tmcon & ~TMCON_T0EN, tmr_reg + KS8695_TMCON);
> +	__raw_writel(tmcon | TMCON_T0EN, tmr_reg + KS8695_TMCON);
>  	spin_unlock(&ks8695_lock);
>  }
>  
> @@ -238,6 +237,11 @@ static struct miscdevice ks8695wdt_miscdev = {
>  static int ks8695wdt_probe(struct platform_device *pdev)
>  {
>  	int res;
> +	struct resource *resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +
> +	tmr_reg = devm_ioremap_resource(&pdev->dev, resource);

Please use devm_platform_ioremap_resource().

Thanks,
Guenter

> +	if (!tmr_reg)
> +		return -ENXIO;
>  
>  	if (ks8695wdt_miscdev.parent)
>  		return -EBUSY;