Web lists-archives.com

[PATCH v4 3/6] dt-bindings: reset: Add bindings for ZynqMP reset driver




Add documentation to describe Xilinx ZynqMP reset driver
bindings.

Signed-off-by: Nava kishore Manne <nava.manne@xxxxxxxxxx>
Signed-off-by: Jolly Shah <jollys@xxxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
---
 .../bindings/reset/xlnx,zynqmp-reset.txt      |  52 +++++++
 .../dt-bindings/reset/xlnx-zynqmp-resets.h    | 130 ++++++++++++++++++
 2 files changed, 182 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt
 create mode 100644 include/dt-bindings/reset/xlnx-zynqmp-resets.h

diff --git a/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt b/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt
new file mode 100644
index 000000000000..27a45fe5ecf1
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt
@@ -0,0 +1,52 @@
+--------------------------------------------------------------------------
+ =  Zynq UltraScale+ MPSoC reset driver binding =
+--------------------------------------------------------------------------
+The Zynq UltraScale+ MPSoC has several different resets.
+
+See Chapter 36 of the Zynq UltraScale+ MPSoC TRM (UG) for more information
+about zynqmp resets.
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Required Properties:
+- compatible:	"xlnx,zynqmp-reset"
+- #reset-cells:	Specifies the number of cells needed to encode reset
+		line, should be 1
+
+-------
+Example
+-------
+
+firmware {
+	zynqmp_firmware: zynqmp-firmware {
+		compatible = "xlnx,zynqmp-firmware";
+		method = "smc";
+
+		zynqmp_reset: reset-controller {
+			compatible = "xlnx,zynqmp-reset";
+			#reset-cells = <1>;
+		};
+	};
+};
+
+Specifying reset lines connected to IP modules
+==============================================
+
+Device nodes that need access to reset lines should
+specify them as a reset phandle in their corresponding node as
+specified in reset.txt.
+
+For list of all valid reset indicies see
+<dt-bindings/reset/xlnx-zynqmp-resets.h>
+
+Example:
+
+serdes: zynqmp_phy@fd400000 {
+	...
+
+	resets = <&zynqmp_reset ZYNQMP_RESET_SATA>;
+	reset-names = "sata_rst";
+
+	...
+};
diff --git a/include/dt-bindings/reset/xlnx-zynqmp-resets.h b/include/dt-bindings/reset/xlnx-zynqmp-resets.h
new file mode 100644
index 000000000000..e295fd5d824e
--- /dev/null
+++ b/include/dt-bindings/reset/xlnx-zynqmp-resets.h
@@ -0,0 +1,130 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ *  Copyright (C) 2018 Xilinx, Inc.
+ */
+
+#ifndef _DT_BINDINGS_ZYNQMP_RESETS_H
+#define _DT_BINDINGS_ZYNQMP_RESETS_H
+
+#define		ZYNQMP_RESET_PCIE_CFG		0
+#define		ZYNQMP_RESET_PCIE_BRIDGE	1
+#define		ZYNQMP_RESET_PCIE_CTRL		2
+#define		ZYNQMP_RESET_DP			3
+#define		ZYNQMP_RESET_SWDT_CRF		4
+#define		ZYNQMP_RESET_AFI_FM5		5
+#define		ZYNQMP_RESET_AFI_FM4		6
+#define		ZYNQMP_RESET_AFI_FM3		7
+#define		ZYNQMP_RESET_AFI_FM2		8
+#define		ZYNQMP_RESET_AFI_FM1		9
+#define		ZYNQMP_RESET_AFI_FM0		10
+#define		ZYNQMP_RESET_GDMA		11
+#define		ZYNQMP_RESET_GPU_PP1		12
+#define		ZYNQMP_RESET_GPU_PP0		13
+#define		ZYNQMP_RESET_GPU		14
+#define		ZYNQMP_RESET_GT			15
+#define		ZYNQMP_RESET_SATA		16
+#define		ZYNQMP_RESET_ACPU3_PWRON	17
+#define		ZYNQMP_RESET_ACPU2_PWRON	18
+#define		ZYNQMP_RESET_ACPU1_PWRON	19
+#define		ZYNQMP_RESET_ACPU0_PWRON	20
+#define		ZYNQMP_RESET_APU_L2		21
+#define		ZYNQMP_RESET_ACPU3		22
+#define		ZYNQMP_RESET_ACPU2		23
+#define		ZYNQMP_RESET_ACPU1		24
+#define		ZYNQMP_RESET_ACPU0		25
+#define		ZYNQMP_RESET_DDR		26
+#define		ZYNQMP_RESET_APM_FPD		27
+#define		ZYNQMP_RESET_SOFT		28
+#define		ZYNQMP_RESET_GEM0		29
+#define		ZYNQMP_RESET_GEM1		30
+#define		ZYNQMP_RESET_GEM2		31
+#define		ZYNQMP_RESET_GEM3		32
+#define		ZYNQMP_RESET_QSPI		33
+#define		ZYNQMP_RESET_UART0		34
+#define		ZYNQMP_RESET_UART1		35
+#define		ZYNQMP_RESET_SPI0		36
+#define		ZYNQMP_RESET_SPI1		37
+#define		ZYNQMP_RESET_SDIO0		38
+#define		ZYNQMP_RESET_SDIO1		39
+#define		ZYNQMP_RESET_CAN0		40
+#define		ZYNQMP_RESET_CAN1		41
+#define		ZYNQMP_RESET_I2C0		42
+#define		ZYNQMP_RESET_I2C1		43
+#define		ZYNQMP_RESET_TTC0		44
+#define		ZYNQMP_RESET_TTC1		45
+#define		ZYNQMP_RESET_TTC2		46
+#define		ZYNQMP_RESET_TTC3		47
+#define		ZYNQMP_RESET_SWDT_CRL		48
+#define		ZYNQMP_RESET_NAND		49
+#define		ZYNQMP_RESET_ADMA		50
+#define		ZYNQMP_RESET_GPIO		51
+#define		ZYNQMP_RESET_IOU_CC		52
+#define		ZYNQMP_RESET_TIMESTAMP		53
+#define		ZYNQMP_RESET_RPU_R50		54
+#define		ZYNQMP_RESET_RPU_R51		55
+#define		ZYNQMP_RESET_RPU_AMBA		56
+#define		ZYNQMP_RESET_OCM		57
+#define		ZYNQMP_RESET_RPU_PGE		58
+#define		ZYNQMP_RESET_USB0_CORERESET	59
+#define		ZYNQMP_RESET_USB1_CORERESET	60
+#define		ZYNQMP_RESET_USB0_HIBERRESET	61
+#define		ZYNQMP_RESET_USB1_HIBERRESET	62
+#define		ZYNQMP_RESET_USB0_APB		63
+#define		ZYNQMP_RESET_USB1_APB		64
+#define		ZYNQMP_RESET_IPI		65
+#define		ZYNQMP_RESET_APM_LPD		66
+#define		ZYNQMP_RESET_RTC		67
+#define		ZYNQMP_RESET_SYSMON		68
+#define		ZYNQMP_RESET_AFI_FM6		69
+#define		ZYNQMP_RESET_LPD_SWDT		70
+#define		ZYNQMP_RESET_FPD		71
+#define		ZYNQMP_RESET_RPU_DBG1		72
+#define		ZYNQMP_RESET_RPU_DBG0		73
+#define		ZYNQMP_RESET_DBG_LPD		74
+#define		ZYNQMP_RESET_DBG_FPD		75
+#define		ZYNQMP_RESET_APLL		76
+#define		ZYNQMP_RESET_DPLL		77
+#define		ZYNQMP_RESET_VPLL		78
+#define		ZYNQMP_RESET_IOPLL		79
+#define		ZYNQMP_RESET_RPLL		80
+#define		ZYNQMP_RESET_GPO3_PL_0		81
+#define		ZYNQMP_RESET_GPO3_PL_1		82
+#define		ZYNQMP_RESET_GPO3_PL_2		83
+#define		ZYNQMP_RESET_GPO3_PL_3		84
+#define		ZYNQMP_RESET_GPO3_PL_4		85
+#define		ZYNQMP_RESET_GPO3_PL_5		86
+#define		ZYNQMP_RESET_GPO3_PL_6		87
+#define		ZYNQMP_RESET_GPO3_PL_7		88
+#define		ZYNQMP_RESET_GPO3_PL_8		89
+#define		ZYNQMP_RESET_GPO3_PL_9		90
+#define		ZYNQMP_RESET_GPO3_PL_10		91
+#define		ZYNQMP_RESET_GPO3_PL_11		92
+#define		ZYNQMP_RESET_GPO3_PL_12		93
+#define		ZYNQMP_RESET_GPO3_PL_13		94
+#define		ZYNQMP_RESET_GPO3_PL_14		95
+#define		ZYNQMP_RESET_GPO3_PL_15		96
+#define		ZYNQMP_RESET_GPO3_PL_16		97
+#define		ZYNQMP_RESET_GPO3_PL_17		98
+#define		ZYNQMP_RESET_GPO3_PL_18		99
+#define		ZYNQMP_RESET_GPO3_PL_19		100
+#define		ZNQMP_RESET_GPO3_PL_20		101
+#define		ZYNQMP_RESET_GPO3_PL_21		102
+#define		ZYNQMP_RESET_GPO3_PL_22		103
+#define		ZYNQMP_RESET_GPO3_PL_23		104
+#define		ZYNQMP_RESET_GPO3_PL_24		105
+#define		ZYNQMP_RESET_GPO3_PL_25		106
+#define		ZYNQMP_RESET_GPO3_PL_26		107
+#define		ZYNQMP_RESET_GPO3_PL_27		108
+#define		ZYNQMP_RESET_GPO3_PL_28		109
+#define		ZYNQMP_RESET_GPO3_PL_29		110
+#define		ZYNQMP_RESET_GPO3_PL_30		111
+#define		ZYNQMP_RESET_GPO3_PL_31		112
+#define		ZYNQMP_RESET_RPU_LS		113
+#define		ZYNQMP_RESET_PS_ONLY		114
+#define		ZYNQMP_RESET_PL			115
+#define		ZYNQMP_RESET_PS_PL0		116
+#define		ZYNQMP_RESET_PS_PL1		117
+#define		ZYNQMP_RESET_PS_PL2		118
+#define		ZYNQMP_RESET_PS_PL3		119
+
+#endif
-- 
2.18.0