Web lists-archives.com

Re: [PATCH V3 2/5] pwm: Add i.MX TPM PWM driver support





On 14.03.2019 08:27, Anson Huang wrote:
> i.MX7ULP has TPM(Low Power Timer/Pulse Width Modulation Module)
> inside, add TPM PWM driver support.
> 
> Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
> ---
> Changes since V2:
> 	- Add "IMX_" as prefix to macro define as TPM is already used;
> 	- Use macro define for channel registers address instead of calculation in everywhere.
> 	- Add limitations statement in copyright.
> ---
>  drivers/pwm/Kconfig       |  10 ++
>  drivers/pwm/Makefile      |   1 +
>  drivers/pwm/pwm-imx-tpm.c | 343 ++++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 354 insertions(+)
>  create mode 100644 drivers/pwm/pwm-imx-tpm.c
> 
> diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
> index a8f47df..c1cbb43 100644
> --- a/drivers/pwm/Kconfig
> +++ b/drivers/pwm/Kconfig
> @@ -201,6 +201,16 @@ config PWM_IMX
>  	  To compile this driver as a module, choose M here: the module
>  	  will be called pwm-imx.
>  
> +config PWM_IMX_TPM
> +	tristate "i.MX TPM PWM support"
> +	depends on ARCH_MXC
> +	help
> +	  Generic PWM framework driver for i.MX7ULP TPM module, TPM's full
> +	  name is Low Power Timer/Pulse Width Modulation Module.
> +
> +	  To compile this driver as a module, choose M here: the module
> +	  will be called pwm-imx-tpm.
> +
>  config PWM_JZ4740
>  	tristate "Ingenic JZ47xx PWM support"
>  	depends on MACH_INGENIC
> diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
> index 9c676a0..64e036c 100644
> --- a/drivers/pwm/Makefile
> +++ b/drivers/pwm/Makefile
> @@ -18,6 +18,7 @@ obj-$(CONFIG_PWM_FSL_FTM)	+= pwm-fsl-ftm.o
>  obj-$(CONFIG_PWM_HIBVT)		+= pwm-hibvt.o
>  obj-$(CONFIG_PWM_IMG)		+= pwm-img.o
>  obj-$(CONFIG_PWM_IMX)		+= pwm-imx.o
> +obj-$(CONFIG_PWM_IMX_TPM)	+= pwm-imx-tpm.o
>  obj-$(CONFIG_PWM_JZ4740)	+= pwm-jz4740.o
>  obj-$(CONFIG_PWM_LP3943)	+= pwm-lp3943.o
>  obj-$(CONFIG_PWM_LPC18XX_SCT)	+= pwm-lpc18xx-sct.o
> diff --git a/drivers/pwm/pwm-imx-tpm.c b/drivers/pwm/pwm-imx-tpm.c
> new file mode 100644
> index 0000000..cdb29f6
> --- /dev/null
> +++ b/drivers/pwm/pwm-imx-tpm.c
> @@ -0,0 +1,343 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright 2018-2019 NXP.
> + *
> + * Limitations:
> + * - The TPM counter and period counter are shared between
> + *   multiple channels, so all channels should use same period
> + *   settings.
> + * - When a channel is disabled, its polarity settings will be
> + *   saved and its output will be disabled by clearing polarity
> + *   setting, when channel is enabled, polarity settings will be
> + *   restored and output will be enabled again.
> + * - ONLY when all channels are disabled, then TPM counter will
> + *   be disabled.
> + */
> +
> +#include <linux/bitops.h>
> +#include <linux/clk.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/log2.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/platform_device.h>
> +#include <linux/pwm.h>
> +#include <linux/slab.h>
> +#include <linux/spinlock.h>
> +
> +#define IMX_TPM_GLOBAL		0x8
> +#define IMX_TPM_SC		0x10
> +#define IMX_TPM_CNT		0x14
> +#define IMX_TPM_MOD		0x18
> +#define IMX_TPM_C0SC		0x20
> +#define IMX_TPM_C0V		0x24
> +
> +#define IMX_TPM_SC_CMOD_SHIFT	3
> +#define IMX_TPM_SC_CMOD_MASK	GENMASK(4, 3)
> +#define IMX_TPM_SC_CPWMS	BIT(5)
> +
> +#define IMX_TPM_CnSC_CHF	BIT(7)
> +#define IMX_TPM_CnSC_MSnB	BIT(5)
> +#define IMX_TPM_CnSC_MSnA	BIT(4)
> +#define IMX_TPM_CnSC_ELSnB	BIT(3)
> +#define IMX_TPM_CnSC_ELSnA	BIT(2)
> +
> +#define IMX_TPM_SC_PS_MASK	0x7
> +#define IMX_TPM_MOD_MOD_MASK	0xffff
> +
> +#define IMX_TPM_COUNT_MAX	0xffff
> +
> +#define IMX_TPM_DEFAULT_PWM_CHANNEL_NUM	2
> +
> +#define IMX_TPM_CnSC(n)	(IMX_TPM_C0SC + n * 0x8)
> +#define IMX_TPM_CnV(n)	(IMX_TPM_C0V + n * 0x8)
> +
> +struct imx_tpm_pwm_chip {
> +	struct pwm_chip chip;
> +	struct clk *clk;
> +	void __iomem *base;
> +	spinlock_t lock;
> +	u32 chn_config[IMX_TPM_DEFAULT_PWM_CHANNEL_NUM];
> +	bool chn_status[IMX_TPM_DEFAULT_PWM_CHANNEL_NUM];
> +};
> +
> +#define to_imx_tpm_pwm_chip(_chip)	container_of(_chip, struct imx_tpm_pwm_chip, chip)
> +
> +static void imx_tpm_pwm_config_counter(struct pwm_chip *chip, u32 period)
> +{
> +	struct imx_tpm_pwm_chip *tpm = to_imx_tpm_pwm_chip(chip);
> +	unsigned int period_cnt;
> +	u32 val, div;
> +	u64 tmp;
> +
> +	tmp = clk_get_rate(tpm->clk);
> +	tmp *= period;
> +	val = DIV_ROUND_CLOSEST_ULL(tmp, NSEC_PER_SEC);
> +	if (val < IMX_TPM_COUNT_MAX)
> +		div = 0;
> +	else
> +		div = ilog2(roundup_pow_of_two(val / IMX_TPM_COUNT_MAX));
> +	if (div > IMX_TPM_SC_PS_MASK) {
> +		dev_err(chip->dev,
> +			"failed to find valid prescale value!\n");
> +		return;
> +	}
> +	/* set TPM counter prescale */
> +	val = readl(tpm->base + IMX_TPM_SC);
> +	val &= ~IMX_TPM_SC_PS_MASK;
> +	val |= div;
> +	writel(val, tpm->base + IMX_TPM_SC);
> +
> +	/* set period counter */
> +	do_div(tmp, NSEC_PER_SEC);
> +	period_cnt = DIV_ROUND_CLOSEST_ULL(tmp, 1 << div);
> +	writel(period_cnt & IMX_TPM_MOD_MOD_MASK, tpm->base + IMX_TPM_MOD);
> +}
> +
> +static void imx_tpm_pwm_config(struct pwm_chip *chip,
> +			       struct pwm_device *pwm,
> +			       struct pwm_state *state)
> +{
> +	struct imx_tpm_pwm_chip *tpm = to_imx_tpm_pwm_chip(chip);
> +	static bool tpm_cnt_initialized;
> +	unsigned int duty_cnt;
> +	u32 val;
> +	u64 tmp;
> +
> +	/*
> +	 * TPM counter is shared by multi channels, let's make it to be
> +	 * ONLY first channel can config TPM counter's precale and period
> +	 * count.
> +	 */
> +	if (!tpm_cnt_initialized) {
> +		imx_tpm_pwm_config_counter(chip, state->period);
> +		tpm_cnt_initialized = true;
> +	}
> +
> +	/* set duty counter */
> +	tmp = readl(tpm->base + IMX_TPM_MOD) & IMX_TPM_MOD_MOD_MASK;
> +	tmp *= state->duty_cycle;
> +	duty_cnt = DIV_ROUND_CLOSEST_ULL(tmp, state->period);
> +	writel(duty_cnt & IMX_TPM_MOD_MOD_MASK,
> +		 tpm->base + IMX_TPM_CnV(pwm->hwpwm));
> +
> +	/* set polarity */
> +	val = readl(tpm->base + IMX_TPM_CnSC(pwm->hwpwm));
> +	val &= ~(IMX_TPM_CnSC_ELSnB | IMX_TPM_CnSC_ELSnA | IMX_TPM_CnSC_MSnA);
> +	val |= IMX_TPM_CnSC_MSnB;
> +	val |= state->polarity ? IMX_TPM_CnSC_ELSnA : IMX_TPM_CnSC_ELSnB;
> +	/*
> +	 * polarity settings will enabled/disable output statue
> +	 * immediately, so here ONLY save the config and will be
> +	 * written into register when channel is enabled/disabled.
> +	 */
> +	tpm->chn_config[pwm->hwpwm] = val;
> +}
> +
> +static void imx_tpm_pwm_enable(struct pwm_chip *chip,
> +			       struct pwm_device *pwm,
> +			       bool enable)
> +{
> +	struct imx_tpm_pwm_chip *tpm = to_imx_tpm_pwm_chip(chip);
> +	u32 val, i;
> +
> +	val = readl(tpm->base + IMX_TPM_SC);
> +	if (enable) {
> +		/* restore channel config */
> +		writel(tpm->chn_config[pwm->hwpwm],
> +			tpm->base + IMX_TPM_CnSC(pwm->hwpwm));
> +
> +		/* start TPM counter anyway */
> +		val |= 0x1 << IMX_TPM_SC_CMOD_SHIFT;
> +		writel(val, tpm->base + IMX_TPM_SC);
> +	} else {
> +		/* save channel config */
> +		tpm->chn_config[pwm->hwpwm] = readl(tpm->base +
> +			IMX_TPM_CnSC(pwm->hwpwm));
> +		/* disable channel */
> +		writel(IMX_TPM_CnSC_CHF, tpm->base + IMX_TPM_CnSC(pwm->hwpwm));
> +
> +		for (i = 0; i < chip->npwm; i++)
> +			if (i != pwm->hwpwm && tpm->chn_status[i])
> +				break;
> +		if (i == chip->npwm) {
> +			/* stop TPM counter since all channels are disabled */
> +			val &= ~IMX_TPM_SC_CMOD_MASK;
> +			writel(val, tpm->base + IMX_TPM_SC);
> +		}
> +	}
> +
> +	/* update channel statue */
> +	tpm->chn_status[pwm->hwpwm] = enable;
> +}
> +
> +static void imx_tpm_pwm_get_state(struct pwm_chip *chip,
> +				  struct pwm_device *pwm,
> +				  struct pwm_state *state)
> +{
> +	struct imx_tpm_pwm_chip *tpm = to_imx_tpm_pwm_chip(chip);
> +	unsigned long rate, flags;
> +	u64 tmp;
> +	u32 val;
> +
> +	spin_lock_irqsave(&tpm->lock, flags);
> +
> +	/* get period */
> +	rate = clk_get_rate(tpm->clk);
> +	tmp = readl(tpm->base + IMX_TPM_MOD);
> +	val = readl(tpm->base + IMX_TPM_SC);
> +	val &= IMX_TPM_SC_PS_MASK;
> +	tmp *= (1 << val) * NSEC_PER_SEC;
> +	state->period = DIV_ROUND_CLOSEST_ULL(tmp, rate);
> +
> +	/* get duty cycle */
> +	tmp = readl(tpm->base + IMX_TPM_CnV(pwm->hwpwm));
> +	tmp *= (1 << val) * NSEC_PER_SEC;
> +	state->duty_cycle = DIV_ROUND_CLOSEST_ULL(tmp, rate);
> +
> +	/* get polarity */
> +	val = readl(tpm->base + IMX_TPM_CnSC(pwm->hwpwm));
> +	if (val & IMX_TPM_CnSC_ELSnA)
> +		state->polarity = PWM_POLARITY_INVERSED;
> +	else
> +		state->polarity = PWM_POLARITY_NORMAL;
> +
> +	/* get channel status */
> +	state->enabled = tpm->chn_status[pwm->hwpwm] ? true : false;
> +
> +	spin_unlock_irqrestore(&tpm->lock, flags);
> +}
> +
> +static int imx_tpm_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
> +			  struct pwm_state *state)
> +{
> +	struct imx_tpm_pwm_chip *tpm = to_imx_tpm_pwm_chip(chip);
> +	struct pwm_state curstate;
> +	unsigned long flags;
> +
> +	imx_tpm_pwm_get_state(chip, pwm, &curstate);
> +
> +	spin_lock_irqsave(&tpm->lock, flags);
> +
> +	if (state->period != curstate.period ||
> +	    state->duty_cycle != curstate.duty_cycle ||
> +	    state->polarity != curstate.polarity)
> +		imx_tpm_pwm_config(chip, pwm, state);
> +
> +	if (state->enabled != curstate.enabled)
> +		imx_tpm_pwm_enable(chip, pwm, state->enabled);
> +
> +	spin_unlock_irqrestore(&tpm->lock, flags);
> +
> +	return 0;
> +}
> +
> +static const struct pwm_ops imx_tpm_pwm_ops = {
> +	.get_state = imx_tpm_pwm_get_state,
> +	.apply = imx_tpm_pwm_apply,
> +	.owner = THIS_MODULE,
> +};
> +
> +static int imx_tpm_pwm_probe(struct platform_device *pdev)
> +{
> +	struct imx_tpm_pwm_chip *tpm;
> +	struct resource *res;
> +	int ret;
> +
> +	tpm = devm_kzalloc(&pdev->dev, sizeof(*tpm), GFP_KERNEL);
> +	if (!tpm)
> +		return -ENOMEM;
> +
> +	platform_set_drvdata(pdev, tpm);
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	tpm->base = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(tpm->base)) {
> +		ret = PTR_ERR(tpm->base);
> +		if (ret != -EPROBE_DEFER)
> +			dev_err(&pdev->dev, "pwm ioremap failed %d\n", ret);
> +		return ret;
> +	}
> +
> +	tpm->clk = devm_clk_get(&pdev->dev, NULL);
> +	if (IS_ERR(tpm->clk)) {
> +		ret = PTR_ERR(tpm->clk);
> +		if (ret != -EPROBE_DEFER)
> +			dev_err(&pdev->dev, "failed to get pwm clk %d\n", ret);
> +		return ret;
> +	}
> +
> +	ret = clk_prepare_enable(tpm->clk);
> +	if (ret) {
> +		dev_err(&pdev->dev,
> +			"failed to prepare or enable clk %d\n", ret);
> +		return ret;
> +	}
> +
> +	tpm->chip.dev = &pdev->dev;
> +	tpm->chip.ops = &imx_tpm_pwm_ops;
> +	tpm->chip.base = -1;
> +	tpm->chip.npwm = IMX_TPM_DEFAULT_PWM_CHANNEL_NUM;
> +
> +	spin_lock_init(&tpm->lock);
> +
> +	ret = pwmchip_add(&tpm->chip);
> +	if (ret)
> +		dev_err(&pdev->dev, "failed to add pwm chip %d\n", ret);

clk_disable_unprepare() in case of failure? Although I would use
clk_prepare()/clk_unprepare() in probe and clk_prepare_enable() only when
PWM is active.

> +
> +	return ret;
> +}
> +
> +static int imx_tpm_pwm_remove(struct platform_device *pdev)
> +{
> +	struct imx_tpm_pwm_chip *tpm = platform_get_drvdata(pdev);
> +

Ditto

> +	return pwmchip_remove(&tpm->chip);
> +}
> +
> +static int __maybe_unused imx_tpm_pwm_suspend(struct device *dev)
> +{
> +	struct imx_tpm_pwm_chip *tpm = dev_get_drvdata(dev);
> +
> +	clk_disable_unprepare(tpm->clk);
> +
> +	return 0;
> +}
> +
> +static int __maybe_unused imx_tpm_pwm_resume(struct device *dev)
> +{
> +	struct imx_tpm_pwm_chip *tpm = dev_get_drvdata(dev);
> +	int ret = clk_prepare_enable(tpm->clk);
> +
> +	if (ret)
> +		dev_err(dev,
> +			"failed to prepare or enable clk %d\n", ret);
> +
> +	return ret;
> +};
> +
> +static SIMPLE_DEV_PM_OPS(imx_tpm_pwm_pm,
> +			 imx_tpm_pwm_suspend, imx_tpm_pwm_resume);
> +
> +static const struct of_device_id imx_tpm_pwm_dt_ids[] = {
> +	{ .compatible = "fsl,imx-tpm-pwm", },
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, imx_tpm_pwm_dt_ids);
> +
> +static struct platform_driver imx_tpm_pwm_driver = {
> +	.driver = {
> +		.name = "imx-tpm-pwm",
> +		.of_match_table = imx_tpm_pwm_dt_ids,
> +		.pm = &imx_tpm_pwm_pm,
> +	},
> +	.probe	= imx_tpm_pwm_probe,
> +	.remove = imx_tpm_pwm_remove,
> +};
> +module_platform_driver(imx_tpm_pwm_driver);
> +
> +MODULE_AUTHOR("Anson Huang <Anson.Huang@xxxxxxx>");
> +MODULE_DESCRIPTION("i.MX TPM PWM Driver");
> +MODULE_LICENSE("GPL v2");
>