[RFC PATCH 0/3] Add support of busfreq
- Date: Wed, 13 Mar 2019 20:34:05 +0100
- From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
- Subject: [RFC PATCH 0/3] Add support of busfreq
This series implements busfreq, a framework used in MXP's
tree to scale the interconnect and dram frequencies.
In the vendor tree, device's driver request for a
performance level, which is used to scale the frequencies.
This series implements it using the interconnect framework.
Devices' driver request for bandwidth which is use by busfreq
to determine a performance level, and then scale the frequency.
Busfreq is quite generic. It could be used for any i.MX SoC.
A busfreq platform driver just have to define a list of
interconnect nodes, and some OPPs.
This series is sent as RFC mostly because the current support
of i.MX SoC won't benefit of busfreq framework, because the
clocks' driver don't support interconnect / dram frequency
As exemple, this series implements busfreq for i.MX8MM whose
upstreaming is in progress. Because this relies on ATF to
do the frequency scaling, it won't be hard make it work.
As exemple, this series implements busfreq for
Alexandre Bailon (3):
drivers: interconnect: Add a driver for i.MX SoC
drivers: interconnect: imx: Add support of i.MX8MM
dt-bindings: interconnect: Document fsl,busfreq-imx8mm bindings
.../bindings/interconnect/imx8mm.txt | 24 +
drivers/interconnect/Kconfig | 1 +
drivers/interconnect/Makefile | 1 +
drivers/interconnect/imx/Kconfig | 17 +
drivers/interconnect/imx/Makefile | 2 +
drivers/interconnect/imx/busfreq-imx8mm.c | 132 ++++
drivers/interconnect/imx/busfreq.c | 570 ++++++++++++++++++
drivers/interconnect/imx/busfreq.h | 123 ++++
include/dt-bindings/interconnect/imx8mm.h | 37 ++
9 files changed, 907 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interconnect/imx8mm.txt
create mode 100644 drivers/interconnect/imx/Kconfig
create mode 100644 drivers/interconnect/imx/Makefile
create mode 100644 drivers/interconnect/imx/busfreq-imx8mm.c
create mode 100644 drivers/interconnect/imx/busfreq.c
create mode 100644 drivers/interconnect/imx/busfreq.h
create mode 100644 include/dt-bindings/interconnect/imx8mm.h