Web lists-archives.com

[PATCH v4 6/7] Revert "scsi: ufs: disable vccq if it's not needed by UFS device"




This reverts commit 60f0187031c05e04cbadffb62f557d0ff3564490.

Calling ufshcd_set_vccq_rail_unused() breaks UFS init on two boards.
I would say that vccq is *not* not needed.

Reviewed-by: Jeffrey Hugo <jhugo@xxxxxxxxxxxxxx>
Signed-off-by: Marc Gonzalez <marc.w.gonzalez@xxxxxxx>
---
 drivers/scsi/ufs/ufs.h    |  1 -
 drivers/scsi/ufs/ufshcd.c | 59 +++------------------------------------
 2 files changed, 4 insertions(+), 56 deletions(-)

diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h
index 6d176815e6ce..21e4ccb5ba6e 100644
--- a/drivers/scsi/ufs/ufs.h
+++ b/drivers/scsi/ufs/ufs.h
@@ -514,7 +514,6 @@ struct ufs_vreg {
 	struct regulator *reg;
 	const char *name;
 	bool enabled;
-	bool unused;
 	int min_uV;
 	int max_uV;
 	int min_uA;
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 4bc55a2f5689..c78f5f199aff 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -254,7 +254,6 @@ static int ufshcd_probe_hba(struct ufs_hba *hba);
 static int __ufshcd_setup_clocks(struct ufs_hba *hba, bool on,
 				 bool skip_ref_clk);
 static int ufshcd_setup_clocks(struct ufs_hba *hba, bool on);
-static int ufshcd_set_vccq_rail_unused(struct ufs_hba *hba, bool unused);
 static int ufshcd_uic_hibern8_exit(struct ufs_hba *hba);
 static int ufshcd_uic_hibern8_enter(struct ufs_hba *hba);
 static inline void ufshcd_add_delay_before_dme_cmd(struct ufs_hba *hba);
@@ -5857,11 +5856,6 @@ static int ufshcd_probe_hba(struct ufs_hba *hba)
 	ufs_fixup_device_setup(hba, &card);
 	ufshcd_tune_unipro_params(hba);
 
-	ret = ufshcd_set_vccq_rail_unused(hba,
-		(hba->dev_quirks & UFS_DEVICE_NO_VCCQ) ? true : false);
-	if (ret)
-		goto out;
-
 	/* UFS device is also active now */
 	ufshcd_set_ufs_dev_active(hba);
 	ufshcd_force_reset_auto_bkops(hba);
@@ -6030,24 +6024,13 @@ static int ufshcd_config_vreg_load(struct device *dev, struct ufs_vreg *vreg,
 static inline int ufshcd_config_vreg_lpm(struct ufs_hba *hba,
 					 struct ufs_vreg *vreg)
 {
-	if (!vreg)
-		return 0;
-	else if (vreg->unused)
-		return 0;
-	else
-		return ufshcd_config_vreg_load(hba->dev, vreg,
-					       UFS_VREG_LPM_LOAD_UA);
+	return ufshcd_config_vreg_load(hba->dev, vreg, UFS_VREG_LPM_LOAD_UA);
 }
 
 static inline int ufshcd_config_vreg_hpm(struct ufs_hba *hba,
 					 struct ufs_vreg *vreg)
 {
-	if (!vreg)
-		return 0;
-	else if (vreg->unused)
-		return 0;
-	else
-		return ufshcd_config_vreg_load(hba->dev, vreg, vreg->max_uA);
+	return ufshcd_config_vreg_load(hba->dev, vreg, vreg->max_uA);
 }
 
 static int ufshcd_config_vreg(struct device *dev,
@@ -6085,9 +6068,7 @@ static int ufshcd_enable_vreg(struct device *dev, struct ufs_vreg *vreg)
 {
 	int ret = 0;
 
-	if (!vreg)
-		goto out;
-	else if (vreg->enabled || vreg->unused)
+	if (!vreg || vreg->enabled)
 		goto out;
 
 	ret = ufshcd_config_vreg(dev, vreg, true);
@@ -6107,9 +6088,7 @@ static int ufshcd_disable_vreg(struct device *dev, struct ufs_vreg *vreg)
 {
 	int ret = 0;
 
-	if (!vreg)
-		goto out;
-	else if (!vreg->enabled || vreg->unused)
+	if (!vreg || !vreg->enabled)
 		goto out;
 
 	ret = regulator_disable(vreg->reg);
@@ -6215,36 +6194,6 @@ static int ufshcd_init_hba_vreg(struct ufs_hba *hba)
 	return 0;
 }
 
-static int ufshcd_set_vccq_rail_unused(struct ufs_hba *hba, bool unused)
-{
-	int ret = 0;
-	struct ufs_vreg_info *info = &hba->vreg_info;
-
-	if (!info)
-		goto out;
-	else if (!info->vccq)
-		goto out;
-
-	if (unused) {
-		/* shut off the rail here */
-		ret = ufshcd_toggle_vreg(hba->dev, info->vccq, false);
-		/*
-		 * Mark this rail as no longer used, so it doesn't get enabled
-		 * later by mistake
-		 */
-		if (!ret)
-			info->vccq->unused = true;
-	} else {
-		/*
-		 * rail should have been already enabled hence just make sure
-		 * that unused flag is cleared.
-		 */
-		info->vccq->unused = false;
-	}
-out:
-	return ret;
-}
-
 static int __ufshcd_setup_clocks(struct ufs_hba *hba, bool on,
 					bool skip_ref_clk)
 {
-- 
2.17.1