[PATCH v3 0/4] M_CAN Framework
- Date: Fri, 11 Jan 2019 11:32:32 -0600
- From: Dan Murphy <dmurphy@xxxxxx>
- Subject: [PATCH v3 0/4] M_CAN Framework
Well it has taken me a while to get this working and ported to a provide a
m_can framework that manages the Bosch m_can stack and abstracts away devices
to use that framework.
The m_can.c is the framework that devices register to.
The device abstractions can provide read/write capability as well as bit timings
and also provide any other initializations that are device specific.
The m_can platform code will need to be updated as I have not tested this code.
The tcan code is working.
Dan Murphy (4):
can: m_can: Create a m_can platform framework
can: m_can: Migrate the m_can code to use the framework
dt-bindings: can: tcan4x5x: Add DT bindings for TCAN4x5X driver
can: tcan4x5x: Add tcan4x5x driver to the kernel
.../devicetree/bindings/net/can/tcan4x5x.txt | 37 +
drivers/net/can/m_can/Kconfig | 18 +
drivers/net/can/m_can/Makefile | 4 +-
drivers/net/can/m_can/m_can.c | 765 +++++++++---------
drivers/net/can/m_can/m_can_platform.c | 212 +++++
drivers/net/can/m_can/m_can_platform.h | 163 ++++
drivers/net/can/m_can/tcan4x5x.c | 458 +++++++++++
7 files changed, 1253 insertions(+), 404 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/can/tcan4x5x.txt
create mode 100644 drivers/net/can/m_can/m_can_platform.c
create mode 100644 drivers/net/can/m_can/m_can_platform.h
create mode 100644 drivers/net/can/m_can/tcan4x5x.c