Web lists-archives.com

[PATCH 1/2] pwm: sifive: Add DT documentation for SiFive PWM Controller

DT documentation for PWM controller added with updated compatible

Signed-off-by: Wesley W. Terpstra <wesley@xxxxxxxxxx>
[Atish: Compatible string update]
Signed-off-by: Atish Patra <atish.patra@xxxxxxx>
Signed-off-by: Yash Shah <yash.shah@xxxxxxxxxx>
 .../devicetree/bindings/pwm/pwm-sifive.txt         | 37 ++++++++++++++++++++++
 1 file changed, 37 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pwm/pwm-sifive.txt

diff --git a/Documentation/devicetree/bindings/pwm/pwm-sifive.txt b/Documentation/devicetree/bindings/pwm/pwm-sifive.txt
new file mode 100644
index 0000000..e0fc22a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/pwm-sifive.txt
@@ -0,0 +1,37 @@
+SiFive PWM controller
+Unlike most other PWM controllers, the SiFive PWM controller currently only
+supports one period for all channels in the PWM. This is set globally in DTS.
+The period also has significant restrictions on the values it can achieve,
+which the driver rounds to the nearest achievable frequency.
+Required properties:
+- compatible: Please refer to sifive-blocks-ip-versioning.txt
+- reg: physical base address and length of the controller's registers
+- clocks: Should contain a clock identifier for the PWM's parent clock.
+- #pwm-cells: Should be 2.
+  The first cell is the PWM channel number
+  The second cell is the PWM polarity
+- sifive,approx-period-ns: the driver will get as close to this period as it can
+- interrupts: one interrupt per PWM channel
+PWM RTL that corresponds to the IP block version numbers can be found
+Further information on the format of the IP
+block-specific version numbers can be found in
+pwm:  pwm@10020000 {
+	compatible = "sifive,fu540-c000-pwm","sifive,pwm0";
+	reg = <0x0 0x10020000 0x0 0x1000>;
+	clocks = <&tlclk>;
+	interrupt-parent = <&plic>;
+	interrupts = <42 43 44 45>;
+	#pwm-cells = <2>;
+	sifive,approx-period-ns = <1000000>;