Web lists-archives.com

[PATCH 13/15 v3] regulator: s5m8767: Hand over GPIO to regulator core




The GPIO descriptors used by the S5M8767 driver are retrieved
during probe() and it is really helpful to have those under
devres management because of all the errorpaths in the
intialization.

Using the new dev_gpiod_unhinge() call we can remove the
devres management of the descriptor right before handing
it over to the regulators core.

Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
ChangeLog v2->v3:
- Resending.
ChangeLog v1->v2:
- New patch handling this drivers GPIO descriptors properly.
---
 drivers/regulator/s5m8767.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/regulator/s5m8767.c b/drivers/regulator/s5m8767.c
index 219b9afda0cb..d1edd8c2bcec 100644
--- a/drivers/regulator/s5m8767.c
+++ b/drivers/regulator/s5m8767.c
@@ -956,10 +956,17 @@ static int s5m8767_pmic_probe(struct platform_device *pdev)
 		config.regmap = iodev->regmap_pmic;
 		config.of_node = pdata->regulators[i].reg_node;
 		config.ena_gpiod = NULL;
-		if (pdata->regulators[i].ext_control_gpiod)
+		if (pdata->regulators[i].ext_control_gpiod) {
+			/* Assigns config.ena_gpiod */
 			s5m8767_regulator_config_ext_control(s5m8767,
 					&pdata->regulators[i], &config);
 
+			/*
+			 * Hand the GPIO descriptor management over to the
+			 * regulator core, remove it from devres management.
+			 */
+			devm_gpiod_unhinge(s5m8767->dev, config.ena_gpiod);
+		}
 		rdev = devm_regulator_register(&pdev->dev, &regulators[id],
 						  &config);
 		if (IS_ERR(rdev)) {
-- 
2.19.2