Web lists-archives.com

Re: [PATCH 1/4] drm/sun4i: tcon: Support an active-low DE signal with RGB interface




On Wed, Oct 10, 2018 at 01:41:31PM +0200, Paul Kocialkowski wrote:
> Some panels need an active-low data enable (DE) signal for the RGB
> interface. This requires flipping a bit in the TCON0 polarity register
> when setting up the mode for the RGB interface.
> 
> Add a new helper function to match specific bus flags and use it to set
> the polarity inversion bit for the DE signal when required.
> 
> Signed-off-by: Paul Kocialkowski <contact@xxxxxxxx>
> ---
>  drivers/gpu/drm/sun4i/sun4i_tcon.c | 28 ++++++++++++++++++++++++++--
>  drivers/gpu/drm/sun4i/sun4i_tcon.h |  1 +
>  2 files changed, 27 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c
> index 3fb084f802e2..d249a462ec09 100644
> --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
> +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
> @@ -78,6 +78,24 @@ static int sun4i_tcon_get_pixel_depth(const struct drm_encoder *encoder)
>  	return -EINVAL;
>  }
>  
> +static bool sun4i_tcon_match_bus_flags(const struct drm_encoder *encoder,
> +				       u32 bus_flags)
> +{
> +	struct drm_connector *connector;
> +	struct drm_display_info *info;
> +
> +	connector = sun4i_tcon_get_connector(encoder);
> +	if (!connector)
> +		return false;
> +
> +	info = &connector->display_info;
> +
> +	if ((info->bus_flags & bus_flags) == bus_flags)
> +		return true;
> +
> +	return false;
> +}
> +
>  static void sun4i_tcon_channel_set_status(struct sun4i_tcon *tcon, int channel,
>  					  bool enabled)
>  {
> @@ -415,6 +433,7 @@ static void sun4i_tcon0_mode_set_lvds(struct sun4i_tcon *tcon,
>  }
>  
>  static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon,
> +				     const struct drm_encoder *encoder,
>  				     const struct drm_display_mode *mode)
>  {
>  	unsigned int bp, hsync, vsync;
> @@ -474,8 +493,13 @@ static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon,
>  	if (mode->flags & DRM_MODE_FLAG_PVSYNC)
>  		val |= SUN4I_TCON0_IO_POL_VSYNC_POSITIVE;
>  
> +	if (sun4i_tcon_match_bus_flags(encoder, DRM_BUS_FLAG_DE_LOW))
> +		val |= SUN4I_TCON0_IO_POL_DE_NEGATIVE;
> +

There's other flags in use in that function, you should also migrate
them (ideally by splitting that new function into a separate patch).

Maxime

-- 
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com