Web lists-archives.com

Re: [PATCH 1/7] MIPS: dts: Add aliases node for lantiq danube serial




On Tue, Jun 12, 2018 at 01:40:28PM +0800, Songjun Wu wrote:
> Previous implementation uses a hard-coded register value to check if
> the current serial entity is the console entity.
> Now the lantiq serial driver uses the aliases for the index of the
> serial port.
> The lantiq danube serial dts are updated with aliases to support this.
> 
> Signed-off-by: Songjun Wu <songjun.wu@xxxxxxxxxxxxxxx>
> ---
> 
>  arch/mips/boot/dts/lantiq/danube.dtsi | 6 +++++-
>  1 file changed, 5 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/mips/boot/dts/lantiq/danube.dtsi b/arch/mips/boot/dts/lantiq/danube.dtsi
> index 2dd950181f8a..7a9e15da6bd0 100644
> --- a/arch/mips/boot/dts/lantiq/danube.dtsi
> +++ b/arch/mips/boot/dts/lantiq/danube.dtsi
> @@ -4,6 +4,10 @@
>  	#size-cells = <1>;
>  	compatible = "lantiq,xway", "lantiq,danube";
>  
> +	aliases {
> +		serial0 = &asc1;
> +	};
> +
>  	cpus {
>  		cpu@0 {
>  			compatible = "mips,mips24Kc";
> @@ -74,7 +78,7 @@
>  			reg = <0xE100A00 0x100>;
>  		};
>  
> -		serial@E100C00 {
> +		asc1: serial@E100C00 {

Fix this to be lower case hex while you are at it.

>  			compatible = "lantiq,asc";
>  			reg = <0xE100C00 0x400>;
>  			interrupt-parent = <&icu0>;
> -- 
> 2.11.0
>