Web lists-archives.com

[PATCH] net/phy: micrel: configure intterupts after autoneg workaround




The commit ("net/phy: micrel: Add workaround for bad autoneg") fixes
an autoneg failure case by resetting the hardware. This turns off
intterupts. Things will work themselves out if the phy
polls, as it will figure out it's state during a poll. However if the
phy uses only intterupts, the phy will stall, since interrupts
are off.

This patch fixes the issue by calling config_intr after resetting the
phy.

Fixes: d2fd719bcb0e ("net/phy: micrel: Add workaround for bad autoneg ")
Signed-off-by: Zach Brown <zach.brown@xxxxxx>
---
 drivers/net/phy/micrel.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 9365b07..bc2a0a4 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -620,6 +620,8 @@ static int ksz9031_read_status(struct phy_device *phydev)
 	if ((regval & 0xFF) == 0xFF) {
 		phy_init_hw(phydev);
 		phydev->link = 0;
+		if (phydev->drv->config_intr)
+			phydev->drv->config_intr(phydev);
 	}
 
 	return 0;
-- 
2.7.4