[PATCH v5 00/11] mm: page migration enhancement for thp
- Date: Thu, 20 Apr 2017 16:47:41 -0400
- From: Zi Yan <zi.yan@xxxxxxxx>
- Subject: [PATCH v5 00/11] mm: page migration enhancement for thp
From: Zi Yan <zi.yan@xxxxxxxxxxxxxx>
The patches are rebased on mmotm-2017-04-13-14-50 with the feedbacks from
Hi Kirill, I have cleaned up Patch 5 and Patch 6, so PTE-mapped THP migration is
handled fully by existing code. Can I have your Ack, at least on these
Hi Naoya, as I significantly modified Patch 5 and Patch 6, I change the author
to me. Let me know if you are OK with it. If not, I will change them back.
I did a thorough check on all patches, it should work well. Please consider
merging it. Otherwise, please give more suggestions.
1. THP migration becomes important in the upcoming heterogeneous memory systems.
As David Nellans from NVIDIA pointed out from other threads
future GPUs or other accelerators will have their memory managed by operating
systems. Moving data into and out of these memory nodes efficiently is critical
to applications that use GPUs or other accelerators. Existing page migration
only supports base pages, which has a very low memory bandwidth utilization.
My experiments (see below) show THP migration can migrate pages more efficiently.
2. Base page migration vs THP migration throughput.
Here are cross-socket page migration results from calling
In x86_64, a Intel two-socket E5-2640v3 box,
single 4KB base page migration takes 62.47 us, using 0.06 GB/s BW,
single 2MB THP migration takes 658.54 us, using 2.97 GB/s BW,
512 4KB base page migration takes 1987.38 us, using 0.98 GB/s BW.
In ppc64, a two-socket Power8 box,
single 64KB base page migration takes 49.3 us, using 1.24 GB/s BW,
single 16MB THP migration takes 2202.17 us, using 7.10 GB/s BW,
256 64KB base page migration takes 2543.65 us, using 6.14 GB/s BW.
THP migration can give us 3x and 1.15x throughput over base page migration
in x86_64 and ppc64 respectivley.
You can test it out by using the code here:
3. Existing page migration splits THP before migration and cannot guarantee
the migrated pages are still contiguous. Contiguity is always what GPUs and
accelerators look for. Without THP migration, khugepaged needs to do extra work
to reassemble the migrated pages back to THPs.
Changes since v4:
* In Patch 5, I dropped PTE-mapped THP migration handling code, since it is
already well handled by existing code.
* In Patch 6, I did a thorough check on PMD handling places and corrected all
errors I discovered.
* In Patch 6, I use is_swap_pmd() to check PMD migration entries and add
VM_BUG_ON to make sure only migration entries present. It should be useful
later when someone wants to add PMD swap entries, since VM_BUG_ON will
catch the missing code path.
* In Patch 6, I keep pmd_none() in pmd_none_or_trans_huge_or_clear_bad() to
avoid confusion on the function name. I also add a comment to explain it.
* In Patch 7-11, I added some missing soft dirty bit preserving code and
corrected page stats countings.
Changes since v3:
* I dropped my fix on zap_pmd_range() since THP migration will not trigger
it and Kirill has posted patches to fix the bug triggered by MADV_DONTNEED.
* In Patch 6, I used !pmd_present() instead of is_pmd_migration_entry()
in pmd_none_or_trans_huge_or_clear_bad() to avoid moving the function to
linux/swapops.h. Currently, !pmd_present() is equivalent to
is_pmd_migration_entry(). Any suggestion is welcome to this change.
Changes since v2:
* I fix a bug in zap_pmd_range() and include the fixes in Patches 1-3.
The racy check in zap_pmd_range() can miss pmd_protnone and pmd_migration_entry,
which leads to PTE page table not freed.
* In Patch 4, I move _PAGE_SWP_SOFT_DIRTY to bit 1. Because bit 6 (used in v2)
can be set by some CPUs by mistake and the new swap entry format does not use
* I also adjust two core migration functions, set_pmd_migration_entry() and
remove_migration_pmd(), to use Kirill A. Shutemov's page_vma_mapped_walk()
function. Patch 8 needs Kirill's comments, since I also add changes
to his page_vma_mapped_walk() function with pmd_migration_entry handling.
* In Patch 8, I replace pmdp_huge_get_and_clear() with pmdp_huge_clear_flush()
in set_pmd_migration_entry() to avoid data corruption after page migration.
* In Patch 9, I include is_pmd_migration_entry() in pmd_none_or_trans_huge_or_clear_bad().
Otherwise, a pmd_migration_entry is treated as pmd_bad and cleared, which
leads to deposited PTE page table not freed.
* I personally use this patchset with my customized kernel to test frequent
page migrations by replacing page reclaim with page migration.
The bugs fixed in Patches 1-3 and 8 was discovered while I am testing my kernel.
I did a 16-hour stress test that has ~7 billion total page migrations.
No error or data corruption was found.
This patchset enhances page migration functionality to handle thp migration
for various page migration's callers:
- cgroup/cpuset migration
- memory hotremove
- soft offline
The main benefit is that we can avoid unnecessary thp splits, which helps us
avoid performance decrease when your applications handles NUMA optimization on
The implementation is similar to that of normal page migration, the key point
is that we modify a pmd to a pmd migration entry in swap-entry like format.
Any comments or advices are welcomed.
Naoya Horiguchi (9):
mm: x86: move _PAGE_SWP_SOFT_DIRTY from bit 7 to bit 1
mm: mempolicy: add queue_pages_node_check()
mm: thp: introduce separate TTU flag for thp freezing
mm: thp: introduce CONFIG_ARCH_ENABLE_THP_MIGRATION
mm: soft-dirty: keep soft-dirty bits over thp migration
mm: hwpoison: soft offline supports thp migration
mm: mempolicy: mbind and migrate_pages support thp migration
mm: migrate: move_pages() supports thp migration
mm: memory_hotplug: memory hotremove supports thp migration
Zi Yan (2):
mm: thp: enable thp migration in generic path
mm: thp: check pmd migration entry in common path
arch/x86/Kconfig | 4 +
arch/x86/include/asm/pgtable.h | 17 ++++
arch/x86/include/asm/pgtable_64.h | 14 ++-
arch/x86/include/asm/pgtable_types.h | 10 +--
arch/x86/mm/gup.c | 7 +-
fs/proc/task_mmu.c | 57 +++++++-----
include/asm-generic/pgtable.h | 51 ++++++++++-
include/linux/huge_mm.h | 32 ++++++-
include/linux/rmap.h | 3 +-
include/linux/swapops.h | 71 ++++++++++++++-
mm/Kconfig | 3 +
mm/gup.c | 22 ++++-
mm/huge_memory.c | 170 ++++++++++++++++++++++++++++++++---
mm/memcontrol.c | 5 ++
mm/memory-failure.c | 35 +++-----
mm/memory.c | 12 ++-
mm/memory_hotplug.c | 17 +++-
mm/mempolicy.c | 124 ++++++++++++++++++-------
mm/migrate.c | 77 ++++++++++++----
mm/mprotect.c | 4 +-
mm/mremap.c | 2 +-
mm/page_vma_mapped.c | 13 ++-
mm/pgtable-generic.c | 3 +-
mm/rmap.c | 18 +++-
24 files changed, 632 insertions(+), 139 deletions(-)