Web lists-archives.com

[PATCH v5 35/40] Add Documentation/technical/external-odb.txt




This describes the external odb mechanism's purpose and
how it works.

Helped-by: Ben Peart <benpeart@xxxxxxxxxxxxx>
Signed-off-by: Christian Couder <chriscool@xxxxxxxxxxxxx>
---
 Documentation/technical/external-odb.txt | 295 +++++++++++++++++++++++++++++++
 1 file changed, 295 insertions(+)
 create mode 100644 Documentation/technical/external-odb.txt

diff --git a/Documentation/technical/external-odb.txt b/Documentation/technical/external-odb.txt
new file mode 100644
index 0000000000..5991221fd5
--- /dev/null
+++ b/Documentation/technical/external-odb.txt
@@ -0,0 +1,295 @@
+External ODBs
+^^^^^^^^^^^^^
+
+The External ODB mechanism makes it possible for Git objects, mostly
+blobs for now though, to be stored in an "external object database"
+(External ODB).
+
+An External ODB can be any object store as long as there is an helper
+program called an "odb helper" that can communicate with Git to
+transfer objects to/from the external odb and to retrieve information
+about available objects in the external odb.
+
+Purpose
+=======
+
+The purpose of this mechanism is to make possible to handle Git
+objects, especially blobs, in much more flexible ways.
+
+Currently Git can store its objects only in the form of loose objects
+in separate files or packed objects in a pack file.
+
+This is not flexible enough for some important use cases like handling
+really big binary files or handling a really big number of files that
+are fetched only as needed. And it is not realistic to expect that Git
+could fully natively handle many of such use cases.
+
+Furthermore many improvements that are dependent on specific setups
+could be implemented in the way Git objects are managed if it was
+possible to customize how the Git objects are handled. For example a
+restartable clone using the bundle mechanism has often been requested,
+but implementing that would go against the current strict rules under
+which the Git objects are currently handled.
+
+What Git needs a mechanism to make it possible to customize in a lot
+of different ways how the Git objects are handled. Though this
+mechanism should try as much as possible to avoid interfering with the
+usual way in which Git handle its objects.
+
+Helpers
+=======
+
+ODB helpers are commands that have to be registered using either the
+"odb.<odbname>.subprocessCommand" or the "odb.<odbname>.scriptCommand"
+config variables.
+
+Registering such a command tells Git that an external odb called
+<odbname> exists and that the registered command should be used to
+communicate with it.
+
+There are 2 kinds of commands. Commands registered using the
+"odb.<odbname>.subprocessCommand" config variable are called "process
+commands" and the associated mode is called "process mode". Commands
+registered using the "odb.<odbname>.scriptCommand" config variables
+are called "script commands" and the associated mode is called "script
+mode".
+
+Process Mode
+============
+
+In process mode the command is started as a single process invocation
+that should last for the entire life of the single Git command that
+started it.
+
+A packet format (pkt-line, see technical/protocol-common.txt) based
+protocol over standard input and standard output is used for
+communication between Git and the helper command.
+
+After the process command is started, Git sends a welcome message
+("git-read-object-client"), a list of supported protocol version
+numbers, and a flush packet. Git expects to read a welcome response
+message ("git-read-object-server"), exactly one protocol version
+number from the previously sent list, and a flush packet. All further
+communication will be based on the selected version.
+
+The remaining protocol description below documents "version=1". Please
+note that "version=42" in the example below does not exist and is only
+there to illustrate how the protocol would look with more than one
+version.
+
+After the version negotiation Git sends a list of all capabilities
+that it supports and a flush packet. Git expects to read a list of
+desired capabilities, which must be a subset of the supported
+capabilities list, and a flush packet as response:
+
+------------------------
+packet: git> git-read-object-client
+packet: git> version=1
+packet: git> version=42
+packet: git> 0000
+packet: git< git-read-object-server
+packet: git< version=1
+packet: git< 0000
+packet: git> capability=get_raw_obj
+packet: git> capability=have
+packet: git> capability=put_raw_obj
+packet: git> capability=not-yet-invented
+packet: git> 0000
+packet: git< capability=get_raw_obj
+packet: git< 0000
+------------------------
+
+Afterwards Git sends a list of "key=value" pairs terminated with a
+flush packet. The list will contain at least the instruction (based on
+the supported capabilities) and the arguments for the
+instruction. Please note, that the process must not send any response
+before it received the final flush packet.
+
+In general any response from the helper should end with a status
+packet. See the documentation of the 'get_*' instructions below for
+examples of status packets.
+
+After the helper has processed an instruction, it is expected to wait
+for the next "key=value" list containing another instruction.
+
+On exit Git will close the pipe to the helper. The helper is then
+expected to detect EOF and exit gracefully on its own. Git will wait
+until the process has stopped.
+
+Script Mode
+===========
+
+In this mode Git launches the script command each time it wants to
+communicates with the helper. There is no welcome message and no
+protocol version in this mode.
+
+The instruction and associated arguments are passed as arguments when
+launching the script command and if needed further information is
+passed between Git and the command through stdin and stdout.
+
+Capabilities/Instructions
+=========================
+
+The following instructions are currently supported by Git:
+
+- init
+- get_git_obj
+- get_raw_obj
+- get_direct
+- put_raw_obj
+- have
+
+The plan is to also support 'put_git_obj' and 'put_direct' soon, for
+consistency with the 'get_*' instructions.
+
+ - 'init'
+
+All the process and script commands must accept the 'init'
+instruction. It should be the first instruction sent to a command. It
+should not be advertised in the capability exchange. Any argument
+should be ignored.
+
+In process mode, after receiving the 'init' instruction and a flush
+packet, the helper should just send a status packet and then a flush
+packet. See the 'get_*' instructions below for examples of status
+packets.
+
+In script mode the command should print on stdout the capabilities
+that it supports if any. This is the only time in script mode when a
+capability exchange happens.
+
+For example a script command could use the following shell code
+snippet to handle the 'init' instruction:
+
+------------------------
+case "$1" in
+init)
+	echo "capability=get_git_obj"
+	echo "capability=put_raw_obj"
+	echo "capability=have"
+	;;
+------------------------
+
+ - 'get_git_obj <sha1>' and 'get_raw_obj <sha1>'
+
+These instructions should have a hexadecimal <sha1> argument to tell
+which object the helper should send to git.
+
+In process mode the sha1 argument should be followed by a flush packet
+like this:
+
+------------------------
+packet: git> command=get_git_obj
+packet: git> sha1=0a214a649e1b3d5011e14a3dc227753f2bd2be05
+packet: git> 0000
+------------------------
+
+After reading that the helper should send the requested object to Git in a
+packet series followed by a flush packet. If the helper does not experience
+problems then the helper must send a "success" status like the following:
+
+------------------------
+packet: git< status=success
+packet: git< 0000
+------------------------
+
+In case the helper cannot or does not want to send the requested
+object as well as any other object for the lifetime of the Git
+process, then it is expected to respond with an "abort" status at any
+point in the protocol:
+
+------------------------
+packet: git< status=abort
+packet: git< 0000
+------------------------
+
+Git neither stops nor restarts the helper in case the "error"/"abort"
+status is set.
+
+If the helper dies during the communication or does not adhere to the
+protocol then Git will stop and restart it with the next instruction.
+
+In script mode the helper should just send the requested object to Git
+by writing it to stdout and should then exit. The exit code should
+signal to Git if a problem occured or not.
+
+The only difference between 'get_git_obj' and 'get_raw_obj' is that in
+case of 'get_git_obj' the requested object should be sent as a Git
+object (that is in the same format as loose object files). In case of
+'get_raw_obj' the object should be sent in its raw format (that is the
+same output as `git cat-file <type> <sha1>`).
+
+ - 'get_direct <sha1>'
+
+This instruction is similar as the other 'get_*' instructions except
+that no object should be sent from the helper to Git. Instead the
+helper should directly write the requested object into a loose object
+file in the ".git/objects" directory.
+
+After the helper has sent the "status=success" packet and the
+following flush packet in process mode, or after it has exited in the
+script mode, Git should lookup again for a loose object file with the
+requested sha1.
+
+ - 'put_raw_obj <sha1> <size> <type>'
+
+This instruction should be following by three arguments to tell which
+object the helper will receive from git: <sha1>, <size> and
+<type>. The hexadecimal <sha1> argument describes the object that will
+be sent from Git to the helper. The <type> is the object type (blob,
+tree, commit or tag) of this object. The <size> is the size of the
+(decompressed) object content.
+
+In process mode the last argument (the type) should be followed by a
+flush packet.
+
+After reading that the helper should read the announced object from
+Git in a packet series followed by a flush packet.
+
+If the helper does not experience problems when receiving and storing
+or processing the object, then the helper must send a "success" status
+as described for the 'get_*' instructions.
+
+In script mode the helper should just receive the announced object
+from its standard input. After receiving and processing the object,
+the helper should exit and its exit code should signal to Git if a
+problem occured or not.
+
+- 'have'
+
+In process mode this instruction should be followed by a flush
+packet. After receiving this packet the helper should send the sha1,
+size and type, in this order, of all the objects it can provide to Git
+(through a 'get_*' instruction). There should be a space character
+between the sha1 and the size and between the size and the type, and
+then a new line character after the type.
+
+If the helper does not experience problems, then it must then send a
+"success" status as described for the 'get_*' instructions.
+
+In script mode the helper should send to its standard output the sha1,
+size and type, in this order of all the objects it can provide to
+Git. There should also be a space character between the sha1 and the
+size and between the size and the type, and then a new line character
+after the type.
+
+After sending this, the script helper should exit and its exit code
+should signal to Git if a problem occured or not.
+
+Selecting objects
+=================
+
+To select objects that should be handled by an external odb, one can
+use the git attributes system. For now this will only work will blobs
+and this will only work along with the 'put_raw_obj' instruction.
+
+For example if one has an external odb called "magic" and has
+registered an associated a process command helper that supports the
+'put_raw_obj' instruction, then one can tell Git that all the .jpg
+files should be handled by the "magic" odb using a .gitattributes file
+can that contains:
+
+------------------------
+*.jpg           odb=magic
+------------------------
+
-- 
2.14.0.rc1.52.gf02fb0ddac.dirty