Re: OT: HDD Adapter for fujitsu Server 2,5" to 3,5"
- Date: Tue, 8 Jan 2019 15:06:59 -0500
- From: Dan Ritter <dsr@xxxxxxxxxxxxxxxx>
- Subject: Re: OT: HDD Adapter for fujitsu Server 2,5" to 3,5"
> On 08.01.19 20:06, Joe wrote:
> > On Tue, 8 Jan 2019 18:29:39 +0100
> > basti <mailinglist@xxxxxxxxxxxxxxxx> wrote:
> >> Hallo,
> >> we have some Fujitsu TX 150 Server with 3,5" HDD and want to install
> >> SSD's (2,5"). We are looking for an adapter usable for HDD Caddy
> >> FSC A3C40056861 or A3C40032808.
> >> All I have found is an Howto to glue the SSD into the A3C40056861 but
> >> I think it's not an good idea if I must change the SSD for some
> >> reason.
> >> I don't want to have extra electrical parts inside of the adapter and
> >> between the backplane and the ssd if possible.
> >> Are there any experience with this?
> > Yes, I bought an adaptor plate recently on Ebay but it wasn't anywhere
> > near right, I had to cut and drill a bit of aluminium to attach to it
> > to make it all fit. I had the impression from the advertisement that
> > they were 'standard'.
> Perhaps I will try this one.
That should work. I hope the side screw holes are at the right