Web lists-archives.com

Re: IPv6 router is not forwarding packets




Am Sonntag, 6. Januar 2019, 20:29:27 CET schrieb Pascal Hambourg:
> You should start with a fully static setup on the host, fix routing, and
> when done you can try to setup SLAAC/DHCPv6.

I agree.

I thought that

iface eth0 inet6 manual

does not do automatic stuff. But after a reboot I still get

root@mohot:~# ip -6 a show eth0
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 state UP qlen 1000
    inet6 2a02:8070:898f:e400:d263:b4ff:fe00:4dd1/64 scope global dynamic 
mngtmpaddr 
       valid_lft 7126sec preferred_lft 3526sec
    inet6 2a02:8070:898f:e4f8:d263:b4ff:fe00:4dd1/64 scope global dynamic 
mngtmpaddr 
       valid_lft 14019sec preferred_lft 14019sec
    inet6 fe80::d263:b4ff:fe00:4dd1/64 scope link 
       valid_lft forever preferred_lft forever
root@mohot:~# ip -6 r
2a02:8070:898f:e400::/64 dev eth0 proto kernel metric 256 pref medium
2a02:8070:898f:e4f8::/64 dev eth0 proto kernel metric 256 pref medium
fe80::/64 dev eth0 proto kernel metric 256 pref medium
default via fe80::d263:b4ff:fe00:325c dev eth0 proto ra metric 1024 hoplimit 64 
pref medium
default via fe80::e228:6dff:fe43:5776 dev eth0 proto ra metric 1024 hoplimit 
255 pref medium
root@mohot:~# 

Is that expected? If yes, is that then dhcpv6 or slaac?

Thanks
Rainer
-- 
Rainer Dorsch
http://bokomoko.de/