Web lists-archives.com

Re: Distinguishing among [unmount, Safely Remove Drive, Eject]




On 05/06/2018 09:26 AM, Brian wrote:
On Sun 06 May 2018 at 15:53:05 +1200, Richard Hector wrote:

On 06/05/18 07:35, Brian wrote:
On Sat 05 May 2018 at 11:06:25 -0500, Richard Owlett wrote:

What are the distinguishing features of unmount, Safely Remove Drive, and
Eject?

There are none. The device is either unmounted or it isn't. It cannnot
be half-unmounted.

Hmm. Is there not a point where it's been made inaccessible to the
filesystem, but caches are not yet flushed?

I don't know but I've always thought that unmounting a USB stick led to
a sync action and buffers were flushed. Anyway, in the light of Henrique
de Moraes Holschuh's enlightening post I'll back away a little from my
previous mail and give a restructured response.

Although it is from a few years ago, the material at

   https://bugzilla.gnome.org/show_bug.cgi?id=598690

could still be useful. Safely Remove Drive and Eject are associated
with DEs, although Xfce seems to manage without them and has unmount as
an only option.

udisks2 is the software involved. A test (as an unprivileged user) after
plugging in a USB stick:

  lsblk                            (To get the device)
  udisksctl mount -b /dev/sdg1
  udisksctl unmount -b /dev/sdg1   (Must be done before the next command).
  udisksctl power-off -b /dev/sdg1 (Observe indicator light on the stick).

The stick needs detaching and re-inserting to get mounting to work again.

From udisksctl(1):

  power-off
   Arranges for the drive to be safely removed and powered off. On the
   OS side this includes ensuring that no process is using the drive,
   then requesting that in-flight buffers and caches are committed to
   stable storage. The exact steps for powering off the drive depends
   on the drive itself and the interconnect used. For drives connected
   through USB, the effect is that the USB device will be deconfigured
   followed by disabling the upstream hub port it is connected to.
Note that as some physical devices contain multiple drives (for
   example 4-in-1 flash card reader USB devices) powering off one drive
   may affect other drives. As such there are not a lot of guarantees
   associated with performing this action. Usually the effect is that
   the drive disappears as if it was unplugged.

I'm still pondering why I would need power-off with a USB device.


That explains a lot. Will have to wait till this afternoon to read your reference.