Re: lm-sensors doesn't see the cpu rpm.....
- Date: Thu, 28 Dec 2017 19:56:10 +0000
- From: Michael Fothergill <michael.fothergill@xxxxxxxxx>
- Subject: Re: lm-sensors doesn't see the cpu rpm.....
On 28 December 2017 at 18:14, deloptes <deloptes@xxxxxxxxx> wrote:
Michael Fothergill wrote:
> I am running stretch on an AMD FX8350 box which uses an Arctic Freezer 13
I'm just wondering if you used the correct switch for the cpu fan - what is
your mother board?
also from the gentoo link
$ grep CONFIG_SENSORS_FAM15H_POWER /boot/config-4.12.10
grep CONFIG_SENSORS_K10TEMP /boot/config-4.12.10
$ lsmod | grep temp
k10temp 16384 0
$ lsmod | grep fam15
fam15h_power 16384 0
does this apply to your kernel?
I am going to suggest to the asus support folks that I might have misconnected the cpu fan up to the motherboard.
I already told them that I wasn't sure if I was using a 3 pin instead of a 4 pin lead which might be a limitation here.
The Windows software diagnostics might also give clues to an erroneous mobo hook up here.
I need to use all the divining rods available on this.