Web lists-archives.com

Re: Supper slow USB disk





It seems pretty clearly to be operating at USB 2 speed. Are there any error messages in your dmesg output?
​I couldn't find any errors in my dmesg log, as I'm sending it as an attachment. ​
 
Can you quantify the performance
​Using my own system, it copies at most 200kps while using a live cd it copies up to 4Mps

 
[    0.000000] microcode: microcode updated early to revision 0x60f, date = 2010-09-29
[    0.000000] Linux version 4.12.0-2-amd64 (debian-kernel@xxxxxxxxxxxxxxxx) (gcc version 6.4.0 20170915 (Debian 6.4.0-6) ) #1 SMP Debian 4.12.13-1 (2017-09-19)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.12.0-2-amd64 root=UUID=c4ab4daf-0aff-4dd5-a4a1-e9098803f0a6 ro quiet
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dff7ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dff80000-0x00000000dff8dfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000dff8e000-0x00000000dffcffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000dffd0000-0x00000000dfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.5 present.
[    0.000000] DMI: System manufacturer System Product Name/P5QL-ASUS-SE, BIOS 0402    10/09/2008
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x120000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-D3FFF write-protect
[    0.000000]   D4000-DFFFF uncachable
[    0.000000]   E0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F00000000 write-back
[    0.000000]   1 base 100000000 mask FE0000000 write-back
[    0.000000]   2 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xdff80 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff905bc00ff780]
[    0.000000] Base memory trampoline at [ffff905bc0099000] 99000 size 24576
[    0.000000] BRK [0x3b954000, 0x3b954fff] PGTABLE
[    0.000000] BRK [0x3b955000, 0x3b955fff] PGTABLE
[    0.000000] BRK [0x3b956000, 0x3b956fff] PGTABLE
[    0.000000] BRK [0x3b957000, 0x3b957fff] PGTABLE
[    0.000000] BRK [0x3b958000, 0x3b958fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35479000-0x36a33fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FB800 000014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 0x00000000DFF80000 00003C (v01 A_M_I_ OEMRSDT  10000809 MSFT 00000097)
[    0.000000] ACPI: FACP 0x00000000DFF80200 000084 (v02 A_M_I_ OEMFACP  10000809 MSFT 00000097)
[    0.000000] ACPI: DSDT 0x00000000DFF80440 006941 (v01 A1099  A1099000 00000000 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000DFF8E000 000040
[    0.000000] ACPI: APIC 0x00000000DFF80390 00006C (v01 A_M_I_ OEMAPIC  10000809 MSFT 00000097)
[    0.000000] ACPI: MCFG 0x00000000DFF80400 00003C (v01 A_M_I_ OEMMCFG  10000809 MSFT 00000097)
[    0.000000] ACPI: OEMB 0x00000000DFF8E040 000089 (v01 A_M_I_ AMI_OEM  10000809 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000DFF86D90 000038 (v01 A_M_I_ OEMHPET  10000809 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x00000000DFF8EBA0 000A7C (v01 DpgPmm CpuPm    00000012 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x11fff7000-0x11fffbfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000011fffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000dff7ffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000011fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011fffffff]
[    0.000000] On node 0 totalpages: 1048350
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14270 pages used for memmap
[    0.000000]   DMA32 zone: 913280 pages, LIFO batch:31
[    0.000000]   Normal zone: 2048 pages used for memmap
[    0.000000]   Normal zone: 131072 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdff80000-0xdff8dfff]
[    0.000000] PM: Registered nosave memory: [mem 0xdff8e000-0xdffcffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdffd0000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffefffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
[    0.000000] e820: [mem 0xe0000000-0xfedfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 38 pages/cpu @ffff905cdfc00000 s114840 r8192 d32616 u524288
[    0.000000] pcpu-alloc: s114840 r8192 d32616 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1031947
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.12.0-2-amd64 root=UUID=c4ab4daf-0aff-4dd5-a4a1-e9098803f0a6 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 4023132K/4193400K available (6485K kernel code, 1145K rwdata, 2908K rodata, 1468K init, 704K bss, 170268K reserved, 0K cma-reserved)
[    0.000000] ftrace: allocating 28157 entries in 110 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS:33024 nr_irqs:456 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 2666.181 MHz processor
[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5332.36 BogoMIPS (lpj=10664724)
[    0.004000] pid_max: default: 32768 minimum: 301
[    0.004000] ACPI: Core revision 20170303
[    0.011249] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.011301] Security Framework initialized
[    0.011303] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.011310] AppArmor: AppArmor disabled by boot time parameter
[    0.011546] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.012995] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.013846] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.013854] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.014168] CPU: Physical Processor ID: 0
[    0.014169] CPU: Processor Core ID: 0
[    0.014171] mce: CPU supports 6 MCE banks
[    0.014178] CPU0: Thermal monitoring enabled (TM2)
[    0.014181] process: using mwait in idle threads
[    0.014186] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.014186] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.014317] Freeing SMP alternatives memory: 24K
[    0.016107] smpboot: Max logical packages: 2
[    0.016468] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.060000] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU     E7300  @ 2.66GHz (family: 0x6, model: 0x17, stepping: 0x6)
[    0.060000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[    0.060000] ... version:                2
[    0.060000] ... bit width:              40
[    0.060000] ... generic registers:      2
[    0.060000] ... value mask:             000000ffffffffff
[    0.060000] ... max period:             000000007fffffff
[    0.060000] ... fixed-purpose events:   3
[    0.060000] ... event mask:             0000000700000003
[    0.060000] smp: Bringing up secondary CPUs ...
[    0.060000] x86: Booting SMP configuration:
[    0.060000] .... node  #0, CPUs:      #1
[    0.004000] calibrate_delay_direct() dropping max bogoMips estimate 2 = 90678495
[    0.142026] smp: Brought up 1 node, 2 CPUs
[    0.142026] smpboot: Total of 2 processors activated (10664.63 BogoMIPS)
[    0.142026] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.142026] sched_clock: Marking stable (140000000, 0)->(322721053, -182721053)
[    0.141962] devtmpfs: initialized
[    0.142033] x86/mm: Memory block size: 128MB
[    0.144892] PM: Registering ACPI NVS region [mem 0xdff8e000-0xdffcffff] (270336 bytes)
[    0.144947] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.144954] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.145012] pinctrl core: initialized pinctrl subsystem
[    0.145124] NET: Registered protocol family 16
[    0.145315] cpuidle: using governor ladder
[    0.145338] cpuidle: using governor menu
[    0.145340] PCCT header not found.
[    0.145365] ACPI: bus type PCI registered
[    0.145366] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.145423] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.145425] PCI: not using MMCONFIG
[    0.145426] PCI: Using configuration type 1 for base access
[    0.146382] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.146584] ACPI: Added _OSI(Module Device)
[    0.146585] ACPI: Added _OSI(Processor Device)
[    0.146585] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.146586] ACPI: Added _OSI(Processor Aggregator Device)
[    0.146787] ACPI: Executed 1 blocks of module-level executable AML code
[    0.149687] ACPI: Dynamic OEM Table Load:
[    0.149692] ACPI: SSDT 0xFFFF905CDA572000 0002B9 (v01 DpgPmm P001Ist  00000011 INTL 20051117)
[    0.149843] ACPI: Dynamic OEM Table Load:
[    0.149847] ACPI: SSDT 0xFFFF905CDA56D000 0004B2 (v01 PmRef  P001Cst  00003001 INTL 20051117)
[    0.150179] ACPI: Dynamic OEM Table Load:
[    0.150182] ACPI: SSDT 0xFFFF905CDA572C00 0002B9 (v01 DpgPmm P002Ist  00000012 INTL 20051117)
[    0.150306] ACPI: Dynamic OEM Table Load:
[    0.150310] ACPI: SSDT 0xFFFF905CDA55DD80 000085 (v01 PmRef  P002Cst  00003000 INTL 20051117)
[    0.150742] ACPI: Interpreter enabled
[    0.150761] ACPI: (supports S0 S1 S3 S4 S5)
[    0.150762] ACPI: Using IOAPIC for interrupt routing
[    0.150789] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.151794] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in ACPI motherboard resources
[    0.151800] pmd_set_huge: Cannot satisfy [mem 0xf0000000-0xf0200000] with a huge-page mapping due to MTRR override.
[    0.151892] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.158968] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.158973] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.158977] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.158985] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.159218] PCI host bridge to bus 0000:00
[    0.159220] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.159222] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.159223] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.159224] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[    0.159226] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff window]
[    0.159227] pci_bus 0000:00: root bus resource [mem 0xf4000000-0xffffffff window]
[    0.159228] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.159236] pci 0000:00:00.0: [8086:2e20] type 00 class 0x060000
[    0.159256] DMAR: Forcing write-buffer flush capability
[    0.159257] DMAR: Disabling IOMMU for graphics on this chipset
[    0.159332] pci 0000:00:01.0: [8086:2e21] type 01 class 0x060400
[    0.159366] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.159411] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.159465] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
[    0.159501] pci 0000:00:1a.0: reg 0x20: [io  0xa800-0xa81f]
[    0.159589] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.159623] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
[    0.159659] pci 0000:00:1a.1: reg 0x20: [io  0xa880-0xa89f]
[    0.159746] pci 0000:00:1a.1: System wakeup disabled by ACPI
[    0.159783] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
[    0.159818] pci 0000:00:1a.2: reg 0x20: [io  0xac00-0xac1f]
[    0.159904] pci 0000:00:1a.2: System wakeup disabled by ACPI
[    0.159944] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
[    0.159960] pci 0000:00:1a.7: reg 0x10: [mem 0xfe7fe000-0xfe7fe3ff]
[    0.160034] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.160079] pci 0000:00:1a.7: System wakeup disabled by ACPI
[    0.160115] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
[    0.160130] pci 0000:00:1b.0: reg 0x10: [mem 0xfe7f8000-0xfe7fbfff 64bit]
[    0.160193] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.160269] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
[    0.160331] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.160380] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.160417] pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
[    0.160479] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.160528] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    0.160562] pci 0000:00:1c.5: [8086:3a4a] type 01 class 0x060400
[    0.160624] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.160673] pci 0000:00:1c.5: System wakeup disabled by ACPI
[    0.160709] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
[    0.160745] pci 0000:00:1d.0: reg 0x20: [io  0xa080-0xa09f]
[    0.160830] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.160865] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
[    0.160900] pci 0000:00:1d.1: reg 0x20: [io  0xa400-0xa41f]
[    0.160985] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.161020] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
[    0.161056] pci 0000:00:1d.2: reg 0x20: [io  0xa480-0xa49f]
[    0.161142] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.161182] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
[    0.161198] pci 0000:00:1d.7: reg 0x10: [mem 0xfe7fc000-0xfe7fc3ff]
[    0.161272] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.161318] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.161352] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.161433] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.161469] pci 0000:00:1f.0: [8086:3a18] type 00 class 0x060100
[    0.161628] pci 0000:00:1f.2: [8086:3a20] type 00 class 0x01018f
[    0.161639] pci 0000:00:1f.2: reg 0x10: [io  0x9000-0x9007]
[    0.161645] pci 0000:00:1f.2: reg 0x14: [io  0x8c00-0x8c03]
[    0.161652] pci 0000:00:1f.2: reg 0x18: [io  0x8880-0x8887]
[    0.161658] pci 0000:00:1f.2: reg 0x1c: [io  0x8800-0x8803]
[    0.161664] pci 0000:00:1f.2: reg 0x20: [io  0x8480-0x848f]
[    0.161670] pci 0000:00:1f.2: reg 0x24: [io  0x8400-0x840f]
[    0.161765] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
[    0.161778] pci 0000:00:1f.3: reg 0x10: [mem 0xfe7f7c00-0xfe7f7cff 64bit]
[    0.161795] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.161878] pci 0000:00:1f.5: [8086:3a26] type 00 class 0x010185
[    0.161889] pci 0000:00:1f.5: reg 0x10: [io  0xa000-0xa007]
[    0.161895] pci 0000:00:1f.5: reg 0x14: [io  0x9c00-0x9c03]
[    0.161901] pci 0000:00:1f.5: reg 0x18: [io  0x9880-0x9887]
[    0.161908] pci 0000:00:1f.5: reg 0x1c: [io  0x9800-0x9803]
[    0.161914] pci 0000:00:1f.5: reg 0x20: [io  0x9480-0x948f]
[    0.161920] pci 0000:00:1f.5: reg 0x24: [io  0x9400-0x940f]
[    0.162049] pci 0000:01:00.0: [1002:68f9] type 00 class 0x030000
[    0.162064] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.162072] pci 0000:01:00.0: reg 0x18: [mem 0xfe8c0000-0xfe8dffff 64bit]
[    0.162078] pci 0000:01:00.0: reg 0x20: [io  0xb000-0xb0ff]
[    0.162089] pci 0000:01:00.0: reg 0x30: [mem 0xfe8a0000-0xfe8bffff pref]
[    0.162122] pci 0000:01:00.0: supports D1 D2
[    0.162165] pci 0000:01:00.1: [1002:aa68] type 00 class 0x040300
[    0.162179] pci 0000:01:00.1: reg 0x10: [mem 0xfe8fc000-0xfe8fffff 64bit]
[    0.162234] pci 0000:01:00.1: supports D1 D2
[    0.162291] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.162294] pci 0000:00:01.0:   bridge window [io  0xb000-0xbfff]
[    0.162296] pci 0000:00:01.0:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.162298] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.162336] pci 0000:00:1c.0: PCI bridge to [bus 04]
[    0.162344] pci 0000:00:1c.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.162408] pci 0000:03:00.0: [197b:2368] type 00 class 0x010185
[    0.162439] pci 0000:03:00.0: reg 0x10: [io  0xdc00-0xdc07]
[    0.162451] pci 0000:03:00.0: reg 0x14: [io  0xd880-0xd883]
[    0.162463] pci 0000:03:00.0: reg 0x18: [io  0xd800-0xd807]
[    0.162476] pci 0000:03:00.0: reg 0x1c: [io  0xd480-0xd483]
[    0.162488] pci 0000:03:00.0: reg 0x20: [io  0xd400-0xd40f]
[    0.162511] pci 0000:03:00.0: reg 0x30: [mem 0xfeaf0000-0xfeafffff pref]
[    0.162623] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.162631] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.162634] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    0.162637] pci 0000:00:1c.4:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.162691] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.162712] pci 0000:02:00.0: reg 0x10: [io  0xc800-0xc8ff]
[    0.162737] pci 0000:02:00.0: reg 0x18: [mem 0xfdeff000-0xfdefffff 64bit pref]
[    0.162752] pci 0000:02:00.0: reg 0x20: [mem 0xfdee0000-0xfdeeffff 64bit pref]
[    0.162763] pci 0000:02:00.0: reg 0x30: [mem 0xfe9f0000-0xfe9fffff pref]
[    0.162836] pci 0000:02:00.0: supports D1 D2
[    0.162838] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.173964] pci 0000:00:1c.5: PCI bridge to [bus 02]
[    0.173968] pci 0000:00:1c.5:   bridge window [io  0xc000-0xcfff]
[    0.173972] pci 0000:00:1c.5:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.173978] pci 0000:00:1c.5:   bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[    0.174032] pci 0000:05:01.0: [14f1:2f30] type 00 class 0x078000
[    0.174054] pci 0000:05:01.0: reg 0x10: [mem 0xfebf0000-0xfebfffff]
[    0.174062] pci 0000:05:01.0: reg 0x14: [io  0xec00-0xec07]
[    0.174121] pci 0000:05:01.0: PME# supported from D3hot D3cold
[    0.174188] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[    0.174191] pci 0000:00:1e.0:   bridge window [io  0xe000-0xefff]
[    0.174194] pci 0000:00:1e.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.174198] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.174200] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.174201] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.174203] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[    0.174204] pci 0000:00:1e.0:   bridge window [mem 0xe0000000-0xefffffff window] (subtractive decode)
[    0.174205] pci 0000:00:1e.0:   bridge window [mem 0xf4000000-0xffffffff window] (subtractive decode)
[    0.174899] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.174954] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.175008] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[    0.175061] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.175115] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.175169] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[    0.175223] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.175276] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.175329] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.175435] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.175437] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.175439] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.175440] vgaarb: loaded
[    0.175491] EDAC MC: Ver: 3.0.0
[    0.175628] PCI: Using ACPI for IRQ routing
[    0.176818] PCI: pci_cache_line_size set to 64 bytes
[    0.176870] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.176871] e820: reserve RAM buffer [mem 0xdff80000-0xdfffffff]
[    0.177045] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.177048] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.177051] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.180093] clocksource: Switched to clocksource hpet
[    0.191817] VFS: Disk quotas dquot_6.6.0
[    0.191850] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.191960] pnp: PnP ACPI init
[    0.192070] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[    0.192074] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.192174] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.192420] pnp 00:02: [dma 2]
[    0.192463] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.192739] pnp 00:03: [dma 3]
[    0.192842] pnp 00:03: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.192906] system 00:04: [io  0x0290-0x0297] has been reserved
[    0.192909] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.193058] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.193059] system 00:05: [io  0x0800-0x087f] has been reserved
[    0.193061] system 00:05: [io  0x0500-0x057f] has been reserved
[    0.193063] system 00:05: [mem 0xfed08000-0xfed08fff] has been reserved
[    0.193065] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.193066] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.193068] system 00:05: [mem 0xfed50000-0xfed8ffff] has been reserved
[    0.193071] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.193295] pnp 00:06: [dma 0 disabled]
[    0.193350] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.193423] system 00:07: [mem 0xffc00000-0xffefffff] has been reserved
[    0.193426] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.193549] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.193551] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.193554] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.193647] system 00:09: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.193650] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.193809] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.193811] system 00:0a: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.193812] system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.193814] system 00:0a: [mem 0x00100000-0xdfffffff] could not be reserved
[    0.193816] system 00:0a: [mem 0xf0000000-0xffffffff] could not be reserved
[    0.193818] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.193939] pnp: PnP ACPI: found 11 devices
[    0.200281] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.200300] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
[    0.200302] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 400000 add_align 100000
[    0.200309] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[    0.200328] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf4000000-0xf43fffff]
[    0.200332] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf4400000-0xf45fffff 64bit pref]
[    0.200335] pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
[    0.200337] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.200339] pci 0000:00:01.0:   bridge window [io  0xb000-0xbfff]
[    0.200342] pci 0000:00:01.0:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.200344] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.200347] pci 0000:00:1c.0: PCI bridge to [bus 04]
[    0.200349] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.200353] pci 0000:00:1c.0:   bridge window [mem 0xf4000000-0xf43fffff]
[    0.200355] pci 0000:00:1c.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.200360] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.200362] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    0.200365] pci 0000:00:1c.4:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.200368] pci 0000:00:1c.4:   bridge window [mem 0xf4400000-0xf45fffff 64bit pref]
[    0.200373] pci 0000:00:1c.5: PCI bridge to [bus 02]
[    0.200374] pci 0000:00:1c.5:   bridge window [io  0xc000-0xcfff]
[    0.200378] pci 0000:00:1c.5:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.200381] pci 0000:00:1c.5:   bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[    0.200386] pci 0000:00:1e.0: PCI bridge to [bus 05]
[    0.200387] pci 0000:00:1e.0:   bridge window [io  0xe000-0xefff]
[    0.200391] pci 0000:00:1e.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.200397] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.200398] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.200400] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.200401] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.200402] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xefffffff window]
[    0.200403] pci_bus 0000:00: resource 9 [mem 0xf4000000-0xffffffff window]
[    0.200405] pci_bus 0000:01: resource 0 [io  0xb000-0xbfff]
[    0.200406] pci_bus 0000:01: resource 1 [mem 0xfe800000-0xfe8fffff]
[    0.200407] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[    0.200409] pci_bus 0000:04: resource 0 [io  0x1000-0x1fff]
[    0.200410] pci_bus 0000:04: resource 1 [mem 0xf4000000-0xf43fffff]
[    0.200411] pci_bus 0000:04: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.200412] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.200413] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.200415] pci_bus 0000:03: resource 2 [mem 0xf4400000-0xf45fffff 64bit pref]
[    0.200416] pci_bus 0000:02: resource 0 [io  0xc000-0xcfff]
[    0.200417] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[    0.200418] pci_bus 0000:02: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
[    0.200420] pci_bus 0000:05: resource 0 [io  0xe000-0xefff]
[    0.200421] pci_bus 0000:05: resource 1 [mem 0xfeb00000-0xfebfffff]
[    0.200422] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7 window]
[    0.200423] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff window]
[    0.200425] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.200426] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.200427] pci_bus 0000:05: resource 8 [mem 0xe0000000-0xefffffff window]
[    0.200428] pci_bus 0000:05: resource 9 [mem 0xf4000000-0xffffffff window]
[    0.200509] NET: Registered protocol family 2
[    0.200692] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.200804] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.200979] TCP: Hash tables configured (established 32768 bind 32768)
[    0.201032] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.201057] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.201125] NET: Registered protocol family 1
[    0.202167] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.202178] PCI: CLS 32 bytes, default 64
[    0.202221] Unpacking initramfs...
[    0.587165] Freeing initrd memory: 22252K
[    0.587203] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.587207] software IO TLB [mem 0xdbf80000-0xdff80000] (64MB) mapped at [ffff905c9bf80000-ffff905c9ff7ffff]
[    0.587670] audit: initializing netlink subsys (disabled)
[    0.587754] audit: type=2000 audit(1506795864.587:1): state=initialized audit_enabled=0 res=1
[    0.588072] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[    0.588118] zbud: loaded
[    0.993369] Key type asymmetric registered
[    0.993370] Asymmetric key parser 'x509' registered
[    0.993384] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.993413] io scheduler noop registered
[    0.993414] io scheduler deadline registered
[    0.993424] io scheduler cfq registered (default)
[    0.993425] io scheduler mq-deadline registered
[    0.993678] pcieport 0000:00:1c.0: enabling device (0106 -> 0107)
[    0.994083] intel_idle: does not run on family 6 model 23
[    0.994170] Monitor-Mwait will be used to enter C-1 state
[    0.994178] Monitor-Mwait will be used to enter C-2 state
[    0.994183] sched_clock: Marking unstable (994100522, 80170)<-(1176901745, -182721053)
[    0.994185] tsc: Marking TSC unstable due to TSC halts in idle
[    0.994460] GHES: HEST is not enabled!
[    0.994522] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.014912] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.015272] Linux agpgart interface v0.103
[    1.015416] AMD IOMMUv2 driver by Joerg Roedel <jroedel@xxxxxxx>
[    1.015417] AMD IOMMUv2 functionality not available on this system
[    1.015568] i8042: PNP: No PS/2 controller found.
[    1.015569] i8042: Probing ports directly.
[    1.018109] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.018113] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.018228] mousedev: PS/2 mouse device common for all mice
[    1.018271] rtc_cmos 00:01: RTC can wake from S4
[    1.018373] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.018393] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.018416] ledtrig-cpu: registered to indicate activity on CPUs
[    1.018749] NET: Registered protocol family 10
[    1.018967] Segment Routing with IPv6
[    1.018980] mip6: Mobile IPv6
[    1.018982] NET: Registered protocol family 17
[    1.018984] mpls_gso: MPLS GSO support
[    1.019098] microcode: sig=0x10676, pf=0x1, revision=0x60f
[    1.019142] microcode: Microcode Update Driver: v2.2.
[    1.019267] registered taskstats version 1
[    1.019279] zswap: loaded using pool lzo/zbud
[    1.019355] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    1.019657] rtc_cmos 00:01: setting system clock to 2017-09-30 18:24:25 UTC (1506795865)
[    1.019685] PM: Hibernation image not present or could not be loaded.
[    1.021523] Freeing unused kernel memory: 1468K
[    1.021524] Write protecting the kernel read-only data: 12288k
[    1.022217] Freeing unused kernel memory: 1692K
[    1.025324] Freeing unused kernel memory: 1188K
[    1.026846] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.161200] ACPI: bus type USB registered
[    1.161226] usbcore: registered new interface driver usbfs
[    1.161235] usbcore: registered new interface driver hub
[    1.165330] usbcore: registered new device driver usb
[    1.165955] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.166237] uhci_hcd: USB Universal Host Controller Interface driver
[    1.166405] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    1.166414] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.166422] uhci_hcd 0000:00:1a.0: detected 2 ports
[    1.166452] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800
[    1.166920] ehci-pci: EHCI PCI platform driver
[    1.167610] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    1.167612] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.167613] usb usb1: Product: UHCI Host Controller
[    1.167615] usb usb1: Manufacturer: Linux 4.12.0-2-amd64 uhci_hcd
[    1.167616] usb usb1: SerialNumber: 0000:00:1a.0
[    1.167766] hub 1-0:1.0: USB hub found
[    1.167774] hub 1-0:1.0: 2 ports detected
[    1.168015] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    1.168021] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[    1.168027] uhci_hcd 0000:00:1a.1: detected 2 ports
[    1.168052] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880
[    1.168169] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.168171] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.168172] usb usb2: Product: UHCI Host Controller
[    1.168173] usb usb2: Manufacturer: Linux 4.12.0-2-amd64 uhci_hcd
[    1.168175] usb usb2: SerialNumber: 0000:00:1a.1
[    1.168272] hub 2-0:1.0: USB hub found
[    1.168278] hub 2-0:1.0: 2 ports detected
[    1.168609] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    1.168614] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 3
[    1.168624] ehci-pci 0000:00:1a.7: debug port 1
[    1.172519] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[    1.172536] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfe7fe000
[    1.178419] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.178430] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.178477] SCSI subsystem initialized
[    1.178868] r8169 0000:02:00.0 eth0: RTL8168c/8111c at 0xffffb20c0064d000, 00:23:54:7f:18:59, XID 1c4000c0 IRQ 28
[    1.178869] r8169 0000:02:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[    1.179947] libata version 3.00 loaded.
[    1.188107] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    1.188184] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.188186] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.188188] usb usb3: Product: EHCI Host Controller
[    1.188189] usb usb3: Manufacturer: Linux 4.12.0-2-amd64 ehci_hcd
[    1.188190] usb usb3: SerialNumber: 0000:00:1a.7
[    1.188316] hub 3-0:1.0: USB hub found
[    1.188324] hub 3-0:1.0: 6 ports detected
[    1.188518] scsi host0: pata_jmicron
[    1.188608] scsi host1: pata_jmicron
[    1.188650] ata1: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 16
[    1.188651] ata2: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 16
[    1.216147] hub 1-0:1.0: USB hub found
[    1.216155] hub 1-0:1.0: 2 ports detected
[    1.244180] hub 2-0:1.0: USB hub found
[    1.244199] hub 2-0:1.0: 2 ports detected
[    1.244404] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.244410] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 4
[    1.244420] ehci-pci 0000:00:1d.7: debug port 1
[    1.248325] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[    1.248336] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfe7fc000
[    1.264114] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.264173] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[    1.264176] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.264178] usb usb4: Product: EHCI Host Controller
[    1.264180] usb usb4: Manufacturer: Linux 4.12.0-2-amd64 ehci_hcd
[    1.264182] usb usb4: SerialNumber: 0000:00:1d.7
[    1.264302] hub 4-0:1.0: USB hub found
[    1.264309] hub 4-0:1.0: 6 ports detected
[    1.264620] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    1.264625] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    1.264631] uhci_hcd 0000:00:1a.2: detected 2 ports
[    1.264647] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000ac00
[    1.264693] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.264694] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.264695] usb usb5: Product: UHCI Host Controller
[    1.264697] usb usb5: Manufacturer: Linux 4.12.0-2-amd64 uhci_hcd
[    1.264698] usb usb5: SerialNumber: 0000:00:1a.2
[    1.264814] hub 5-0:1.0: USB hub found
[    1.264820] hub 5-0:1.0: 2 ports detected
[    1.264918] ata_piix 0000:00:1f.2: version 2.13
[    1.264990] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    1.266006] scsi host2: ata_piix
[    1.266092] scsi host3: ata_piix
[    1.266138] ata3: SATA max UDMA/133 cmd 0x9000 ctl 0x8c00 bmdma 0x8480 irq 19
[    1.266141] ata4: SATA max UDMA/133 cmd 0x8880 ctl 0x8800 bmdma 0x8488 irq 19
[    1.266213] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    1.267029] scsi host4: ata_piix
[    1.267110] scsi host5: ata_piix
[    1.267152] ata5: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 19
[    1.267154] ata6: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 19
[    1.267258] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.267439] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.267445] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    1.267451] uhci_hcd 0000:00:1d.0: detected 2 ports
[    1.267467] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a080
[    1.267836] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    1.267838] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.267840] usb usb6: Product: UHCI Host Controller
[    1.267841] usb usb6: Manufacturer: Linux 4.12.0-2-amd64 uhci_hcd
[    1.267842] usb usb6: SerialNumber: 0000:00:1d.0
[    1.267968] hub 6-0:1.0: USB hub found
[    1.267976] hub 6-0:1.0: 2 ports detected
[    1.268171] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.268177] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    1.268182] uhci_hcd 0000:00:1d.1: detected 2 ports
[    1.268200] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400
[    1.268271] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    1.268273] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.268274] usb usb7: Product: UHCI Host Controller
[    1.268276] usb usb7: Manufacturer: Linux 4.12.0-2-amd64 uhci_hcd
[    1.268277] usb usb7: SerialNumber: 0000:00:1d.1
[    1.268381] hub 7-0:1.0: USB hub found
[    1.268388] hub 7-0:1.0: 2 ports detected
[    1.268627] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.268632] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    1.268638] uhci_hcd 0000:00:1d.2: detected 2 ports
[    1.268655] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a480
[    1.268705] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    1.268707] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.268708] usb usb8: Product: UHCI Host Controller
[    1.268709] usb usb8: Manufacturer: Linux 4.12.0-2-amd64 uhci_hcd
[    1.268710] usb usb8: SerialNumber: 0000:00:1d.2
[    1.268807] hub 8-0:1.0: USB hub found
[    1.268814] hub 8-0:1.0: 2 ports detected
[    1.350891] ata1.00: ATAPI: DVD-ROM DDU1632, VER BS25, max UDMA/33
[    1.355820] ata1.00: configured for UDMA/33
[    1.358574] scsi 0:0:0:0: CD-ROM            SONY     DVD-ROM DDU1632  BS25 PQ: 0 ANSI: 5
[    1.516112] usb 3-3: new high-speed USB device number 2 using ehci-pci
[    1.592093] usb 4-2: new high-speed USB device number 2 using ehci-pci
[    1.593095] ata5: SATA link down (SStatus 0 SControl 300)
[    1.603662] ata6: SATA link down (SStatus 0 SControl 300)
[    1.603669] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x266e72ce37c, max_idle_ns: 440795233325 ns
[    1.666461] usb 3-3: New USB device found, idVendor=058f, idProduct=6362
[    1.666464] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.666467] usb 3-3: Product: Mass Storage Device
[    1.666469] usb 3-3: Manufacturer: Generic
[    1.666471] usb 3-3: SerialNumber: 058F312D81B
[    1.668119] usb-storage 3-3:1.0: USB Mass Storage device detected
[    1.668249] scsi host6: usb-storage 3-3:1.0
[    1.668316] usbcore: registered new interface driver usb-storage
[    1.668592] usbcore: registered new interface driver uas
[    1.741013] usb 4-2: New USB device found, idVendor=0bda, idProduct=8179
[    1.741016] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.741019] usb 4-2: Product: 802.11n NIC
[    1.741021] usb 4-2: Manufacturer: Realtek
[    1.741023] usb 4-2: SerialNumber: 00E04C0001
[    1.784106] usb 3-4: new high-speed USB device number 3 using ehci-pci
[    1.791951] random: fast init done
[    1.937460] usb 3-4: New USB device found, idVendor=8564, idProduct=1000
[    1.937463] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.937465] usb 3-4: Product: Mass Storage Device
[    1.937467] usb 3-4: Manufacturer: JetFlash
[    1.937469] usb 3-4: SerialNumber: 357F6FFRKM51A594
[    1.938385] usb-storage 3-4:1.0: USB Mass Storage device detected
[    1.938478] scsi host7: usb-storage 3-4:1.0
[    2.060150] ata4.00: SATA link down (SStatus 0 SControl 300)
[    2.060161] ata4.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.070840] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.070850] ata3.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.073003] ata4.01: ATAPI: SONY    DVD RW DRU-860S, 1.61, max UDMA/100
[    2.075634] ata3.00: supports DRM functions and may not be fully accessible
[    2.075637] ata3.00: ATA-9: Samsung SSD 750 EVO 120GB, MAT01B6Q, max UDMA/133
[    2.075639] ata3.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 0/32)
[    2.077722] ata4.01: configured for UDMA/100
[    2.102214] ata3.01: ATA-8: STM3500418AS, CC34, max UDMA/133
[    2.102216] ata3.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.104690] ata3.00: supports DRM functions and may not be fully accessible
[    2.105163] ata3.00: configured for UDMA/133
[    2.152498] ata3.01: configured for UDMA/133
[    2.152679] scsi 2:0:0:0: Direct-Access     ATA      Samsung SSD 750  1B6Q PQ: 0 ANSI: 5
[    2.184394] scsi 2:0:1:0: Direct-Access     ATA      STM3500418AS     CC34 PQ: 0 ANSI: 5
[    2.217622] scsi 3:0:1:0: CD-ROM            SONY     DVD RW DRU-860S  1.61 PQ: 0 ANSI: 5
[    2.231469] sd 2:0:1:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    2.231515] sd 2:0:1:0: [sdb] Write Protect is off
[    2.231517] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[    2.231530] sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[    2.231549] sd 2:0:0:0: [sda] Write Protect is off
[    2.231550] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.231558] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.231587] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.241593] sr 0:0:0:0: [sr0] scsi3-mmc drive: 4x/40x cd/rw xa/form2 cdda tray
[    2.241595] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.241732] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    2.252117] usb 5-1: new full-speed USB device number 2 using uhci_hcd
[    2.254781] sr 3:0:1:0: [sr1] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.254917] sr 3:0:1:0: Attached scsi CD-ROM sr1
[    2.267273]  sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 >
[    2.269167]  sda: sda1 sda2 sda3 sda4
[    2.269296] sd 2:0:1:0: [sdb] Attached SCSI disk
[    2.269578] sd 2:0:0:0: [sda] Attached SCSI disk
[    2.425147] usb 5-1: New USB device found, idVendor=24ae, idProduct=2000
[    2.425151] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.425154] usb 5-1: Product: RAPOO 2.4G Wireless Device
[    2.425156] usb 5-1: Manufacturer: RAPOO
[    2.429460] hidraw: raw HID events driver (C) Jiri Kosina
[    2.435832] usbcore: registered new interface driver usbhid
[    2.435834] usbhid: USB HID core driver
[    2.436628] input: RAPOO RAPOO 2.4G Wireless Device as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/0003:24AE:2000.0001/input/input3
[    2.496342] hid-generic 0003:24AE:2000.0001: input,hidraw0: USB HID v1.01 Keyboard [RAPOO RAPOO 2.4G Wireless Device] on usb-0000:00:1a.2-1/input0
[    2.496938] input: RAPOO RAPOO 2.4G Wireless Device as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.1/0003:24AE:2000.0002/input/input4
[    2.556607] hid-generic 0003:24AE:2000.0002: input,hiddev0,hidraw1: USB HID v1.01 Mouse [RAPOO RAPOO 2.4G Wireless Device] on usb-0000:00:1a.2-1/input1
[    2.688991] scsi 6:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
[    2.689606] scsi 6:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
[    2.690228] scsi 6:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
[    2.690851] scsi 6:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
[    2.784100] raid6: sse2x1   gen()  4491 MB/s
[    2.852093] raid6: sse2x1   xor()  4502 MB/s
[    2.920088] raid6: sse2x2   gen()  7029 MB/s
[    2.988092] raid6: sse2x2   xor()  5483 MB/s
[    3.056091] raid6: sse2x4   gen()  7853 MB/s
[    3.124091] raid6: sse2x4   xor()  6253 MB/s
[    3.124092] raid6: using algorithm sse2x4 gen() 7853 MB/s
[    3.124093] raid6: .... xor() 6253 MB/s, rmw enabled
[    3.124094] raid6: using ssse3x2 recovery algorithm
[    3.124374] xor: measuring software checksum speed
[    3.164086]    prefetch64-sse: 11071.000 MB/sec
[    3.204084]    generic_sse:  9728.000 MB/sec
[    3.204085] xor: using function: prefetch64-sse (11071.000 MB/sec)
[    3.204424] async_tx: api initialized (async)
[    3.251315] Btrfs loaded, crc32c=crc32c-generic
[    3.496879] scsi 7:0:0:0: Direct-Access     JetFlash Transcend 32GB   1100 PQ: 0 ANSI: 6
[    3.498482] sd 7:0:0:0: [sdg] 61702144 512-byte logical blocks: (31.6 GB/29.4 GiB)
[    3.499352] sd 7:0:0:0: [sdg] Write Protect is off
[    3.499355] sd 7:0:0:0: [sdg] Mode Sense: 43 00 00 00
[    3.500224] sd 7:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.505867]  sdg: sdg1
[    3.509727] sd 7:0:0:0: [sdg] Attached SCSI removable disk
[   13.685844] PM: Starting manual resume from disk
[   13.685848] PM: Hibernation image partition 8:2 present
[   13.685848] PM: Looking for hibernation image.
[   13.686059] PM: Image not found (code -22)
[   13.686061] PM: Hibernation image not present or could not be loaded.
[   14.180104] usb 3-3: reset high-speed USB device number 2 using ehci-pci
[   14.476157] sd 6:0:0:1: [sdd] Attached SCSI removable disk
[   14.476852] sd 6:0:0:2: [sde] Attached SCSI removable disk
[   14.641115] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   14.762494] systemd[1]: RTC configured in localtime, applying delta of 210 minutes to system time.
[   14.783422] ip_tables: (C) 2000-2006 Netfilter Core Team
[   14.790178] systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[   14.790296] systemd[1]: Detected architecture x86-64.
[   14.790520] systemd[1]: Set hostname to <debian>.
[   14.928710] systemd[1]: Listening on fsck to fsckd communication Socket.
[   14.928814] systemd[1]: Listening on Journal Socket.
[   14.928837] systemd[1]: Reached target Libvirt guests shutdown.
[   14.928920] systemd[1]: Listening on udev Control Socket.
[   14.928943] systemd[1]: Reached target User and Group Name Lookups.
[   14.928970] systemd[1]: Listening on Syslog Socket.
[   14.929006] systemd[1]: Listening on LVM2 poll daemon socket.
[   14.945995] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   14.957773] RPC: Registered named UNIX socket transport module.
[   14.957774] RPC: Registered udp transport module.
[   14.957774] RPC: Registered tcp transport module.
[   14.957775] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   14.978411] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
[   14.987034] device-mapper: uevent: version 1.0.3
[   14.987224] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@xxxxxxxxxx
[   15.040893] loop: module loaded
[   15.083341] random: crng init done
[   15.115502] systemd-journald[299]: Received request to flush runtime journal from PID 1
[   15.199263] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[   15.199269] ACPI: Power Button [PWRB]
[   15.199365] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[   15.199367] ACPI: Power Button [PWRF]
[   15.207062] ATK0110 ATK0110:00: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[   15.224690] parport_pc 00:03: reported by Plug and Play ACPI
[   15.224785] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[   15.248504] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   15.285841] sr 0:0:0:0: Attached scsi generic sg0 type 5
[   15.285880] sd 2:0:0:0: Attached scsi generic sg1 type 0
[   15.285914] sd 2:0:1:0: Attached scsi generic sg2 type 0
[   15.285949] sr 3:0:1:0: Attached scsi generic sg3 type 5
[   15.285983] sd 6:0:0:0: Attached scsi generic sg4 type 0
[   15.286017] sd 6:0:0:1: Attached scsi generic sg5 type 0
[   15.286048] sd 6:0:0:2: Attached scsi generic sg6 type 0
[   15.286082] sd 6:0:0:3: Attached scsi generic sg7 type 0
[   15.286116] sd 7:0:0:0: Attached scsi generic sg8 type 0
[   15.295936] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[   15.312671] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input7
[   15.319734] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC662 rev1: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[   15.319801] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   15.319802] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   15.319804] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   15.319805] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
[   15.319806] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   15.319808] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[   15.319810] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[   15.319811] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[   15.325301] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000084F (\PMRG) (20170303/utaddress-247)
[   15.325309] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   15.325354] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   15.353496] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   15.353558] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   15.353612] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   15.353669] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   15.353720] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   15.363258] [drm] radeon kernel modesetting enabled.
[   15.465437] CRAT table not found
[   15.465439] Finished initializing topology ret=0
[   15.465453] kfd kfd: Initialized module
[   15.476251] input: PC Speaker as /devices/platform/pcspkr/input/input13
[   15.488928] [drm] initializing kernel modesetting (CEDAR 0x1002:0x68F9 0x1787:0x2291 0x00).
[   15.488977] radeon 0000:01:00.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0xffff
[   15.489059] ATOM BIOS: CEARD
[   15.489111] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[   15.489113] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[   15.489115] [drm] Detected VRAM RAM=1024M, BAR=256M
[   15.489116] [drm] RAM width 64bits DDR
[   15.493362] [TTM] Zone  kernel: Available graphics memory: 2024878 kiB
[   15.493364] [TTM] Initializing pool allocator
[   15.493370] [TTM] Initializing DMA pool allocator
[   15.493399] [drm] radeon: 1024M of VRAM memory ready
[   15.493400] [drm] radeon: 1024M of GTT memory ready.
[   15.493419] [drm] Loading CEDAR Microcode
[   15.558914] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/CEDAR_pfp.bin
[   15.569923] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/CEDAR_me.bin
[   15.576041] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/CEDAR_rlc.bin
[   15.588359] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/CEDAR_smc.bin
[   15.588371] [drm] Internal thermal controller with fan control
[   15.595728] intel_powerclamp: No package C-state available
[   15.598119] 8188eu: loading out-of-tree module taints kernel.
[   15.606912] Chip Version Info: CHIP_8188E_Normal_Chip_TSMC_D_CUT_1T1R_RomVer(0)
[   15.620111] [drm] radeon: dpm initialized
[   15.621729] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/CYPRESS_uvd.bin
[   15.621786] [drm] GART: num cpu pages 262144, num gpu pages 262144
[   15.625916] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[   15.638230] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000).
[   15.638402] radeon 0000:01:00.0: WB enabled
[   15.638405] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff905cd8678c00
[   15.638407] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff905cd8678c0c
[   15.638810] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffb20c0161c418
[   15.638817] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   15.638818] [drm] Driver supports precise vblank timestamp query.
[   15.638819] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[   15.639043] radeon 0000:01:00.0: radeon: using MSI.
[   15.639131] [drm] radeon: irq initialized.
[   15.660699] [drm] ring test on 0 succeeded in 1 usecs
[   15.660706] [drm] ring test on 3 succeeded in 2 usecs
[   15.846483] [drm] ring test on 5 succeeded in 1 usecs
[   15.846489] [drm] UVD initialized successfully.
[   15.847000] [drm] ib test on ring 0 succeeded in 0 usecs
[   15.847030] [drm] ib test on ring 3 succeeded in 0 usecs
[   16.013263] ppdev: user-space parallel port driver
[   16.020514] EEPROM ID = 0x8129
[   16.021030] usbcore: registered new interface driver r8188eu
[   16.194013] Adding 6143996k swap on /dev/sda2.  Priority:-1 extents:1 across:6143996k SSFS
[   16.283132] iTCO_vendor_support: vendor-support=0
[   16.283696] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   16.283744] iTCO_wdt: Found a ICH10 TCO device (Version=2, TCOBASE=0x0860)
[   16.284071] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   16.350361] r8188eu 4-2:1.0 wlxec086b1ead45: renamed from wlan0
[   16.372388] FAT-fs (sdg1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   16.512142] [drm] ib test on ring 5 succeeded
[   16.512517] [drm] Radeon Display Connectors
[   16.512518] [drm] Connector 0:
[   16.512518] [drm]   HDMI-A-1
[   16.512519] [drm]   HPD2
[   16.512520] [drm]   DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[   16.512521] [drm]   Encoders:
[   16.512522] [drm]     DFP1: INTERNAL_UNIPHY1
[   16.512522] [drm] Connector 1:
[   16.512523] [drm]   DVI-I-1
[   16.512523] [drm]   HPD4
[   16.512524] [drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[   16.512525] [drm]   Encoders:
[   16.512525] [drm]     DFP2: INTERNAL_UNIPHY
[   16.512526] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   16.512527] [drm] Connector 2:
[   16.512527] [drm]   VGA-1
[   16.512528] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[   16.512529] [drm]   Encoders:
[   16.512529] [drm]     CRT2: INTERNAL_KLDSCP_DAC2
[   16.580891] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[   16.619779] [drm] fb mappable at 0xE034D000
[   16.619780] [drm] vram apper at 0xE0000000
[   16.619780] [drm] size 8294400
[   16.619781] [drm] fb depth is 24
[   16.619782] [drm]    pitch is 7680
[   16.620132] fbcon: radeondrmfb (fb0) is primary device
[   16.649954] Console: switching to colour frame buffer device 240x67
[   16.654256] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[   16.668174] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0
[   46.180106] usb 3-3: reset high-speed USB device number 2 using ehci-pci
[   78.948116] usb 3-3: reset high-speed USB device number 2 using ehci-pci
[   79.232003] sd 6:0:0:3: [sdf] Attached SCSI removable disk
[   79.235576] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[   79.434170] fuse init (API version 7.26)
[   79.724922] EXT4-fs (sdb3): recovery complete
[   79.764766] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
[   80.295446] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   80.295668] NFSD: starting 90-second grace period (net ffffffff89cd6600)
[   80.758459] r8169 0000:02:00.0 eth0: link down
[   80.758668] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   80.773216] r8188eu 4-2:1.0: firmware: direct-loading firmware rtlwifi/rtl8188eufw.bin
[   80.773234] R8188EU: Firmware Version 11, SubVersion 1, Signature 0x88e1
[   81.184516] MAC Address = ec:08:6b:1e:ad:45
[   81.196444] IPv6: ADDRCONF(NETDEV_UP): wlxec086b1ead45: link is not ready
[   81.213065] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   81.241822] IPv6: ADDRCONF(NETDEV_UP): wlxec086b1ead45: link is not ready
[   81.249769] R8188EU: INFO indicate disassoc
[   81.351361] IPv6: ADDRCONF(NETDEV_UP): wlxec086b1ead45: link is not ready
[   81.490544] IPv6: ADDRCONF(NETDEV_UP): wlxec086b1ead45: link is not ready
[   82.605277] R8188EU: INFO indicate disassoc
[   82.621675] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   82.644018] Ebtables v2.0 registered
[   91.024689] r8188eu 4-2:1.0: firmware: direct-loading firmware rtlwifi/rtl8188eufw.bin
[   92.883914] R8188EU: INFO assoc success
[   92.883956] IPv6: ADDRCONF(NETDEV_CHANGE): wlxec086b1ead45: link becomes ready
[  121.956112] usb 3-3: reset high-speed USB device number 2 using ehci-pci
[  154.724113] usb 3-3: reset high-speed USB device number 2 using ehci-pci
[  187.496100] usb 3-3: reset high-speed USB device number 2 using ehci-pci
[  218.212114] usb 3-3: reset high-speed USB device number 2 using ehci-pci
[  355.428111] usb 3-3: reset high-speed USB device number 2 using ehci-pci
[  388.196116] usb 3-3: reset high-speed USB device number 2 using ehci-pci
[  429.159571] rfkill: input handler disabled