Web lists-archives.com

Re: Install on hp-pavilion-g6-2100 stops at 98%

Le 02/09/2017 à 19:54, Brian a écrit :

Use 'cp debian.iso /dev/sdX' if you have another Linux computer to

I'm on Mac OS. After some ggogling, I did install the ISO on a new USB key like this

unmountDisk /dev/disk1
sudo dd if=./debian-9.1.0-amd64-netinst.iso of=/dev/disk1 bs=1m

Then I did the install, but now I have this at startup

error: file `/boot/grub/x86_g4-efi/normal.mod`not found
Entering rescue mode...
grub rescue>

Did more googling an I saw that some people did an ls command here, which I did

grub rescue>
(hd0) (hd0.gpt6) (hd0) (hd0.gpt5) (hd0) (hd0.gpt4) (hd0) (hd0.gpt3) (hd0) (hd0.gpt2) (hd0) (hd0.gpt1) (hd0) (hd1) (cd0)

That I think means the disks I have (I did chose a LVM with a home, tmp, etc)

Any ideas?

You shouldn't have to wait so long. My installs take about 10 minutes.

Well, now it goes faster, I must admit, but still no real luck ;)

Thanks again