Re: Live recording
David Wright <deblis@xxxxxxxxxxxxxxxxx> writes:
> On Thu 03 Aug 2017 at 15:43:15 (+0200), Rodolfo Medina wrote:
>> Rodolfo Medina <rodolfo.medina@xxxxxxxxx> writes:
>> > Jeremy Nicoll <jn.ml.dbn.25@xxxxxxxxxxxxxxx> writes:
>> >> On Thu, 3 Aug 2017, at 13:23, Rodolfo Medina wrote:
>> >>> 3) mic2 is stereo.
>> >> Not necessarily. It might be a mono signal that's been duplicated across
>> >> two outputs.
>> Is there, as far as you know, a mono microphone model that we can be sure it
>> does not do so? I.e., its sound is heared on only one channel?
> Most mono microphones will be fitted with a plug that has a tip and
> barrel, but no ring (between the two). The effects you observe could
> be no more than chance vagarities in the mechanical construction of
> plug and socket.
>> >> It's only 2-channel if it can record two separate sounds at the
>> >> same time.
>> >> You can get microphones which, in a single unit, record more than one
>> >> channel at once. Their labelling or artwork on them normally makes it
>> >> clear that they have L and R (or more than that) inputs.
>> >> What makes and models are your mics?
>> > I can't tell, because they're old and I don't keep their specs. One of
>> > them was given to me about 15 years ago, the other I don't even remember
>> > how I have it. But I've got another teo: they are, each of them, part of
>> > a headphone. They also let hear the recorded sound from both channels.
>> > They are:
>> > http://www.trust.com/it/product/11916-primo-chat-headset
>> > and
>> > http://www.trust.com/it/product/20685-mauro-headset
>> Just now I received a reply from Trust assistence and they say the mic
>> (Primo) is mono.
>> Anyway, about my example above, can we conclude that mic1 is mono and that
>> the mic input of my PC is stereo...?
> If you want to know whether the input is stereo, plug in a cable which
> has a stereo 3.5mm plug going to two phono plugs. (These computer↔monitor
> sound cables were everywhere at one time.) Touch just the pin of each
> phono plug in turn and see if you get mains hum separately on the
> left and right channels of the computer.
> If you're keen to use these microphones and you have the budget and
> attitude of a school pupil, buy two mono 3.5mm sockets and a twin
> phono socket unit. Solder the connections yourself using the phone
> socket pair to anchor the 3.5mm ones and give it stability. Then
> connect this device to the computer with the aforementioned cable
> and plug in the mikes.
Thanks. But all my 4 microphones terminates in 3.5mm, and the splitter I was
talking about is two 3.5mm female and one 3.5mm male. Is this you mean...?