Web lists-archives.com

Re: samba config




Hy Tony!

I would give one more trial. Please use the name what is defined in your /etc/samba/smb.conf in the global section with "netbios name ="
If nothing is set, set something, restart the smbd and nmbd service and try with the newly configured name.

If that neither works, I will have temporarly no other idea.

- Tamas Fekete

2017-07-28 19:21 GMT+02:00 tony mollica <tjm3@xxxxxxxxxxxxx>:
Thanks.  Tried with lo ip and interface ip with the same result.  No change in the response.
No log entries about this.


Tony

On 07/28/2017 09:47 AM, Fekete Tamás wrote:
Hello Tony!

What if you use IP address instead of localhost?

127.0.0.1 might better than localhost, as localhost is a DNS-like name, but as I know the whole SAMBA uses netbios naming conventions.
So please try with the IP address.

- Tamas Fekete
Debian v9.0 user

2017-07-28 17:53 GMT+02:00 tony mollica <tjm3@xxxxxxxxxxxxx <mailto:tjm3@xxxxxxxxxxxxx>>:

    Hello.

    Maybe a minor samba config problem but searches only show up some
    very old stuff and that doesn't appear to rectify the problem.

    Once, again, Debian Stretch with samba installed.  All I need is to
    access a few files on Stretch from a win7 box, and that works.     What I can't get to work is the smbclient command to view the status
    of shares on Stretch.
    smbclient -L localhost results in a password request, then entered,
    and the result is invariably this:

    smbclient -L localhost
    Enter tjm2's password:

    Connection to localhost failed (Error NT_STATUS_UNSUCCESSFUL)

    I've tried different users and root with the same result.  Tried
    adjusting the routing tables and using actual ip instead of
    localhost, also with no improvement.

    I'm overlooking something, but it's not clear to what that is.     Like I said, the connection between boxes works just fine with no
    problems.

    thanks,
    tony