Web lists-archives.com

Re: Did I blow my processor?




One time I hooked up the power switch to the wrong jumpers and it took me an hour to figure it out.

I would suggest double checking everything to make sure there's nothing you missed. And as Felix already mentioned, parts can be dead on arrival so that is the next thing I would look for.


--
Steven Mainor

On February 20, 2017 4:41:30 PM EST, Felix Miata <mrmazda@xxxxxxxxxxxxx> wrote:
Dennis Wicks composed on 2017-02-20 15:00 (UTC-0600):

I built myself another computer and it wouldn't boot up. No
messages or anything. I finally discovered that I missed
plugging in the 12V power to the MoBo.
I've done that many times while building, replacing or troubleshooting. You
can't hurt a CPU by not giving it any power.

I did that and it
still won't boot up, and still no messages diaplayed on the
screen or any other indication of life.

Have I ruined my processor turning the system on with out
the 12V attached? (This is the four wires from the power
supply that plug into the mobo right next to the processor,
for those that may not be familiar with installing stuff.)

What have you done to prove your power supply isn't bad? New ones can be DOA.
Did you install 100% compatible RAM? Did you try installing only one RAM stick,
or leaving all unnecessary devices (if there is onboard video, the gfxcard; HD;
DVD reader; accessory USB ports; speakers; etc.) disconnected? Are you sure the
CPU is fully compatible with the motherboard's firmware/BIOS/chipset (just
because it fits the socket is no guarantee it will work)?
--
"The wise are known for their understanding, and pleasant
words are persuasive." Proverbs 16:21 (New Living Translation)

Team OS/2 ** Reg. Linux User #211409 ** a11y rocks!

Felix Miata *** http://fm.no-ip.com/