Re: how to access and display apps that I've launched
- Date: Tue, 25 Jul 2017 14:38:06 +0000 (UTC)
- From: "Ian Lambert via cygwin" <cygwin@xxxxxxxxxx>
- Subject: Re: how to access and display apps that I've launched
On Tue, 7/25/17, Ken Brown <> wrote:
Subject: Re: how to access and display apps that I've launched
To: "Ian Lambert" <>, cygwin@xxxxxxxxxx
Date: Tuesday, July 25, 2017, 9:03 AM
On 7/25/2017 12:26 AM, Ian
> On July 24, 2017
10:58:29 PM EDT, Ken Brown <> wrote:
>> On 7/24/2017 6:08 PM, Ian Lambert via
>>> This time I ran
"rebase-trigger full", did full
>> then ran
>>> 0 [main] nautilus 3240
E:\cygwin64-3\bin\cygpangocairo-1.0-0.dll: Loaded to
>> This kind of fork error can be very
stubborn. The best long-term
solution is to switch to 64-bit Cygwin if you can. If you
>> have to stick to 32-bit,
try to limit the number of DLLs that are
> I'm using 64 bit
cygwin already. This is a difference from the OP (It was in
my earlier post).
missed that. Have you looked at the output of 'rebase
Conflicts are marked with
'*'. What about BLODA?
= = =
I had not. It may be worth mentioning I have not found rebase
in the fine manual, even under cygwin utilities. I only find
it mentioned in forum posts, and with 4 rebase* programs
under /usr/bin, it's playing too much monte carlo games with
the install to just try those.
Obviously something is not right; here is output from "rebase -is":
rebase: failed to open rebase database "/etc/rebase.db.x86_64":
No such file or directory
"locate rebase.db" gives:
so it was apparently there when running locate database updates
yesterday at ~1130-1330 (Eastern US), before doing the
"rebase-trigger full", shutdown/restart, setup.
BLODA is certainly a possibility; Symantec Protection is on the job...
It was playing well together before, but things do change.
Problem reports: http://cygwin.com/problems.html
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple